Seville Classics WEB562 Commmercial-Grade 5-Tier NSF Steel Wire Shelving Instruction Manual
- October 30, 2023
- seville classics
Table of Contents
Seville Classics WEB562 Commmercial-Grade 5-Tier NSF Steel Wire Shelving
Instruction Manual
Model #: WEB562
Thank you for choosing Seville Classics! We hope that you enjoy your
commercial-grade steel wire shelving! Please read through this guide for parts
list, assembly instructions, frequently asked questions and further contact
information.
Additional parts and accessories are available for purchase online at: www.SevilleClassics.com
-
Shelf Labels
-
Shelving Liners 48″ x 18″ (2-Pack) Model No.: WEB047
-
S-Hook (6-pack) Model No.: WEB232
-
UltraDurable Shelf 48″ x 18″ Model No.: SHE18476
View assembly online here: https://www.youtube.com/watch?v=N6iRVVqBG
Caution
- Place heavier items on the lower shelves and lighter ones on the top.
- Do notstand or climb on the shelving system.
- Do not drop heavy items on the system.
- Do not move the system while loaded.
Specificañons
Assembled Dimensions: 48″ W x 18″ D x 72″ H (75″ H on wheels), 1″ Pole Diameter
| Weight capacity | Per shelf | Overall |
|---|---|---|
| On leveling feet | 6o0 lbs. (272.2 kg) | 3000 lbs. (1360.8 kg) |
| On wheels | 100 lbs. (45.3 kg) | 500 lbs. (226.8 kg) |
Parts List
Please make sure you have all the parts on this list.
A. Bottom poles (4) (Threaded end)
B. Top poles (4) (Plastic cap on end)
C. Connectors (4) (May be attached to poles)
D. Shelves (5)
E. Slip sleeves (20)
F. Leveling feet (4)
G. Wheels (2)
H. Locking wheels (2)
Assembly Instructions
STEP 1.
Screw LEVELING FEET (F) or WHEELS (G, H) into base of bottom poles. OF Repeat
for all bottom poles.
STEP 2.
Snap SLIP SLEEVES (E) around the grooves on BOTTOM POLES (A) for your lowest
shelf.
TIP! Count the number of grooves from the bottom of the pole to keep the
height consistent.
STEP 3.
Fit SHELF (D) over the top of the 4 poles and over SLIP SLEEVES (E).
Repeat STEPS 2-3 for next shelf.
TIP! If necessary, lightly tap shelves into place with a rubber mallet.
STEP 4.
If you’re missing parts, contact us for replacements at (800) 323-5565 orsend
an email to Support@SeviIIeCIassics.com
Assembly Instructions Screw CONNECTORS (C) into top of BOTTOM POLES (A)
Screw TOP POLES (B) to CONNECTORS (C).
TIP! Connectors may be pre-installed.
STEP 5.
Repeat STEPS 2-3 for remaining shelves.
Congratulations!
Enjoy your fully assembled shelving unit.
Customer Service Informat1on
Seville Classics, Inc
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM — 4:30 PM (PST), Monday to Friday
Email: Support@SeviIIeCIassics.com
Homepage: www.SeviIIeCIassics.com