Seville Classics WEB675 5-Tier Steel Wire Shelving User Manual
- June 16, 2024
- seville classics
Table of Contents
Seville Classics WEB675 5-Tier Steel Wire Shelving
Thank you for choosing Seville Classics! We hope that you enjoy your steel wire shelving system! Please read through this guide for parts list, assembly instructions, frequently asked questions and further contact information.
Additional parts and accessories are available for purchase online at:
Models
- Shelf Labels
- S-Hook (6-pack) Model No.: WEB232
- Shelving Liners 30″‘ x 14″ (2-Pack) Model No.: WEB274
- Steel Wire Shelf 30″‘ x 14″ Model No.: WEB370
View assembly online here:
Caution
- Place heavier items on the lower shelves and lighter ones on the top.
- Do not stand or climb on the shelving system.
- Do not drop heavy items on the system.
- Do not move the system while loaded.
Specifications
Assembled Dimensions: 30″ W x 14″ D x 48″ H
Customer Service Information
Seville Classics, Inc
- Telephone : 800-323-5565
- Fax: 310-533-3899
- Hours: 8:30 AM – 4:30 PM (PST), Monday to Friday
- Email: Support@SevilleClassics.com
- Homepage: www.SevilleClassics.com
Parts List
Please make sure you have all the parts on this list.
- A. Bottom poles (4) (Threaded end)
- B. Top poles (4) (Plastic cap on end)
- C. Connectors (4) (May be attached to poles)
- D. Shelves(5)
- E. Slip sleeves (20)
- F. Leveling feet (4)
If you’re missing parts, contact us for replacements at
- 800-323-5565 or send an
- email to Support@SevilleClassics.com
Assembly Instructions
-
STEP 1.
Screw LEVELING FEET (F) into base of bottom poles. Repeat for all bottom poles. -
STEP 2.
Snap SLIP SLEEVES (E) around the grooves on BOTTOM POLES (A) for your lowest shelf.- TIP! Count the number of grooves from the bottom of the pole to keep the height consistent.
-
STEP 3.
Fit SHELF (D) over the top of the 4 poles and over SLIP SLEEVES (E). Repeat STEPS 2-3 for the next shelf.- TIP! If necessary, lightly tap shelves into place with a rubber mallet.
-
STEP 4.
Screw CONNECTORS (C) into top of BOTTOM POLES (A). Screw TOP POLES (B) to CONNECTORS (C).- TIP! Connectors may be pre-installed.
-
STEP 5.
Repeat STEPS 2-3 for remaining shelves.
Congratulations! Enjoy your new complete shelving unit.