Pink Power PP121Li 12 Volt Lithium Ion Drill Kit Instruction Manual
- June 17, 2024
- Pink Power
Table of Contents
POWERFUL TOOLS FOR POWERFUL WOMEN
12 Volt Lithium Ion Drill Kit PP121Li
POWERFUL TOOLS FOR POWERFUL WOMEN
Thank you for your purchase!
Ever since we started back in 2011, our mission has been to give YOU the
confidence to tackle something new. Whether you’re building a deck or just
hanging a picture, we’ll be there along the way. We stand behind every
product, which is why they come with a full 3-year warranty. Our contact
information is listed below and you can reach out to us any time. From the
entire Pink Power family, we wish you all the best on your next project!
Thank you!
Need to get in touch?
Register Your Warranty and sign up for free coupons:
Questions?
Call or Text Us: 813.304.2224
Email Us:Customerservice@pinkpowerdrill.com
Love your items so much that you want to be a Brand Ambassador?
Join the Pink Power Army by sending your request to:
affiliate@pinkpowerdrill.com
Follow us for discounts and fun!
@shoppinkpower
pinkpowerdrill.com/blog
FEATURES:
- Keyless Chuck
- 18+1 Torque Selector
- 2-Speed Selector
- Battery Power Gauge
- Forward/Reverse Switch
- ON/OFF Trigger
- Battery Pack
- LED Light
OPERATING INSTRUCTIONS:
CHARGING THE BATTERY PACK
The battery pack for this tool has been shipped in a low charge condition to
extend battery life. The battery should be fully charged prior to first use.
Remove your charger and plug it into a power source A Green light on the
charger will illuminate. Place the battery in the charger and the Green and
Red light will illuminate together. This means the battery is charging. Once
the battery has finished charging, only the Green light will remain
illuminated. Do not charge batteries in extreme heat or cold. Make sure to
fully charge and discharge the batteries on the first few uses to help the
battery reach full charge.
INSERTING & REMOVING THE BATTERY
Before placing the battery pack in the drill, make sure the Switch Lock is in
the center position. This keeps the drill in a locked stage.
Hold the drill with one hand and insert the stick of the battery directly into
the bottom of the drill using the other hand. To remove the battery , press in
the 2 buttons on the side of the battery pack (one on each side) and pull
down. This will release the battery.
BATTERY GAUGE
The drill is equiped with a battery gauge on the side of the drill. When
pulling the trigger the gauge will illuminate. If all 3 lights are
illuminated, your battery is fully charged. If 2 lights are illuminated, your
battery is at 50% charge. If just l light is illiminated, you need to recharge
the battery pack. SWITCH LOCK & ON/OFF TRIGGER
The Switch Lock comes with 3 positions. When holding the drill away from you,
push the Switch Lock all the way to the left – your drill is now ready to use
in the forward position. Push the Switch Lock all the way to the right and
your drill is now in the reverse position (used to remove screws). To lock
your drill, push the Switch Lock to the center position. To use your
drill,just pull the Trigger. Your Trigger is pressure sensitive so the more
pressure you apply, the faster your drill will spin.
INSERTING & REMOVING DRILL BITS
Make sure the Switch Lock is in the locked state (center position). Face the
front of the drill toward you and twist the Keyless Chuck counter-clockwise to
loosen the chuck and clockwise to tighten the chuck. Your drill bit will be
inserted between the 3 teeth at the end of the chuck. TORQUE & SPEED
ADJUSTMENT
To adjust the torque, hold and twist the Torque Setting located directly
behind the Keyless Chuck. Your drill comes with 18 torque settings and l
setting for drilling holes. Since Torque is what gives the drill power, we
recommend starting with a lower setting and adjusting as needed. Use the lower
settings for softer materials like drywall and use the higher settings for
harder materials like cement or wood. When using the drill to drill a hole,
use the last setting (shaped like a drill bit). When you first begin using
your drill, we recommend keeping the speed setting at one. This allows you to
control the drill easier and will work great for precision projects.
To change the speed, just push the Speed Selector on top of your drill forward
or backward. LED LIGHT
Your drill comes with an LED light that will automatically tum on when the
trigger is pulled. This helps when working in dim areas such as a closet or
cabinet. Prefer video tips instead? Go to
Pinkpowerdrill.com/Videos
TOOL SAFETY:
SAFETY
Do not use power tools under the influence of medication, drugs, or alcohol as
this could result in serious injury. Keep hair, clothing, jewelry, and other
loose objects away from moving parts. Use the proper safety equipment when
operating power tools. Never modify your tools as this could increase the risk
of electric shock or malfunction. Make sure to always ensure proper balance
when using power tools. If your tool is damaged stop use immediately.
WORKING AREA
Keep your working area clean and well lit. Cluttered and dark areas can lead
to accidents. Do not operate power tools in explosive atmospheres such as in
the presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite fumes and dust.
CLEANING & MAINTENANCE
Always remove the battery before cleaning. Remove dust and dirt with a
slightly damp cloth. Ensure that no water gets into the inner parts of your
tools, battery, and charger. Your tool is permanently lubricated and does not
require oil.
BATTERY USE & CARE
Only use the included charger to charge your battery. Using the incorrect
charger could result in injury or damage to your battery. Do not leave battery
and charger unattended when charging. Once the battery is fully charged,
remove it from the charge r. Abuse of the tool can lead to battery leakage.
Avoid contact with battery fluid. If contact occurs, seek medical help
immediately. Never attempt to open the battery for any reason. Do not expose
your battery to rain or wet conditions. Do not store your battery in
temperatures below 39F or above 7OF.
TECHNICAL DATA:
Battery: 12-Volt Lithium-ion
Battery capacity: 1.5Ah
No-load speed (RPM): 0-350/0-1350
Chuck capacity: 10mm
Torque settings: 18+1
Torque rating: 225 in-LBs
Charge time: < l hour
Weight (drill and battery): 2.1lbs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>