Pink Power PP201B 20 Volt Lithium Ion Vacuum Installation Guide
- June 17, 2024
- Pink Power
Table of Contents
POWERFUL TOOLS FOR POWERFUL WOMEN
20-VOLT LITHIUM-ION
VACUUM
PP201B
PP201B 20 Volt Lithium Ion Vacuum
Thank you for your purchase!
Ever since we started back in 2011, our mission has been to give YOU the
confidence to tackle something new. Whether you’re building a deck or just
hanging a picture, we’ll be there along the way. We stand behind every
product, which is why they come with a full 3-year warranty. Our contact
information is listed below and you can reach out to us any time. From the
entire Pink Power family, we wish you all the best on your next project!
Thank you!
Need to get in touch?
Register Your Warranty and sign up for free coupons:
Questions?
Call or Text Us: 813.304.2224
Email Us :
customerservice@pinkpowerdrill.com
Love your items so much that you want to be a Brand Ambassador?
Join the Pink Power Army by sending your request to:
affiliate@pinkpowerdrill.com
Follow us for discounts and fun!
@shoppinkpower
pinkpowerdrill.com/blog
20-VOLT LITHIUM-ION VACUUM
FEATURES:
- Power Switch
- LED Light
- Dust Bin Release Switch
- 600ML Dust Bin
- Dust Filter
- Extension Tube
- Crevice Tool
- Floor Brush
- Battery Pack (sold separately)
OPERATING INSTRUCTIONS:
CHARGING THE BATTERY PACK
Your vacuum is compatible with the PP202 Battery and PP205 Charger (not
included). To charge your battery, plug the charger into a power source. A red
light on the charger will illuminate. Place the battery in the charger and a
green light wiil flash. Do not charge batteries in extrerne heat or cold. Make
sure to fully charge and discharge the batteries on the first few uses to help
the battery reach full charge. Please reference the table on the next page for
battery charge status. (See Table 1)
INSERTING AND REMOVING THE BATTERY
Slide the battery into the back of the vaccum until you hear a “Click”
noise. To remove the battery, press the button on the front of the battery
down and pull away from the vacuum. This will release the battery.
USING YOUR VACUUM AND ATTACHMENTS
To use as a handheld vacuum you can connect the Crevice Tool directly to
the Dust Bin. For hard to reach areas, connect the Crevice Tool directly to
the Extension Tube. If using to clean floors, connect the Floor Brush to the
Extension Tube. Your vacuum includes a Power Switch that must be held down to
power the unit. This will prolong the life of the battery when not in use.
EMPTYING YOUR DUST BIN
For optimal suction, your Dust Bin should be emptied when it reaches 30%
capacity. Make sure the unit is powered off and press in the Dust Bin Release
Switch and pull the Dust Bin away from the vacuum. Dispose of debris in a
waste basket. To attach your Dust Bin back the the vaccum, just hold down the
Dust Bin Release Switch and press the Dust Bin into place.
CLEANING YOUR DUST BIN AND FILTER
Remove your Dust Bin by following instructions from the previous section
above.
Once removed, twist your Dust Filter counter-clockwise to remove the Dust
Filter.
Your Dust Filter can be cleaned using warm water and soap. Allow your Dust
Filter to dry before placing back in the vacuum. Your filter should be cleaned
monthly if using your vacuum multiple times per week.
BATTERY GAUGE
Your battery includes a power gauge on the back of the unit. To check the
power of your battery, press the button on the back of the unit. Below is a
table showing the power level of your battery. When your LED is flashing, it
is time to charge your battery. (See Table 2) Prefer video tips instead? Go to
Pinkpowerdrill.com/Videos
TOOL SAFETY:
SAFETY
Do not use power tools under the influence of medication, drugs, or alcohol
as this could result in serious injury. Keep hair, clothing, jewelry, and
other loose objects away fromm moving parts. Use the proper safety equipment
when operating power tools.
Never modify your tools as this could increase the risk of electric shock or
malfunction. Make sure to always ensure proper balance when using power tools.
If your tool is damaged stop use immediately.
WORKING AREA
Keep your working area clean and well lit. Cluttered and dark areas can
lead to accidents. Do not operate power tools in explosive atmospheres such as
in the presence of flammable liquids, gases, or dust. Power tools create
sparks which may ignite furnes and dust.
CLEANING & MAINTENANCE
Always remove the battery before cleaning. Remove dust and dirt with a
slightly damp cloth. Ensure that no water gets into the inner parts of your
tools, battery, and charger. Your tool is permanently lubricated and does not
require oil.
BATTERY USE & CARE
Only use the PP205 charger to charge your battery. Using the incorrect
charger could result in injury or damage to your battery. Do not leave the
battery and charger unattended when charging. Once the battery is fully
charged, remove it frorn the charger. Abuse of the tool can lead to battery
leakage. Avoid contact with battery fluid. If contact occurs, seek medical
help immediately. Never attempt to open the battery for any reason. Do not
expose your battery to rain or wet conditions. Do not store your battery in
temperatures below 39°F or above 70°F.
OTHER
Do not vacuum materials that are harmful to one’s health. Do not use the
vacuum on liquids or without a filter. Do not vacuum hot or burning materials.
TECHNICAL DATA:
Battery: 20-Volt Lithium-ion
Hattery capacity: 1.5Ah
Run time: 18 minutes
Gust Bin capacity: 600ML
Charge time: <1 hour
TABLE 1
| | Charger has power
---|---|---
| | Battery is charging
| | Battery is fully charged
| | Charging fault
| | Charger is outside operating temperature
TABLE 2
| Indicator lamps | Remaining capacity |
|---|
Lighted| **
off| **
Blinking
| 75% to 100%
| 50% to 75%
| 25% to 50%
| 0% to 25%
| Charge the battery