Pink Power PP481-LK Electric Cordless Screwdriver and Bubble Level Kit Instruction Manual

: June 5, 2024
: Pink Power

Table of Contents

DESCRIPTION
INSTRUCTIONS
UNLOADING THE BIT
TOOL SAFETY
TECHNICAL DATA
Warranty Information
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Pink Power PP481-LK Electric Cordless Screwdriver and Bubble Level Kit

Thank you for your purchase from Pink Power!

We hope our tools will help you with any project you approach, whether you are building a deck or just hanging a picture. We designed our tools specifically for women and hope they will help you complete your tasks. We are proud of our Pink Power line and happy to offer you quality tools. All of our tools come with a full 3 year warranty. If any damage occurs to your tool. battery or charger just reach out to us using the information below and I will replace your tool at no cost to you. We greatly appreciate your business.
Thank you,

DESCRIPTION

Pink-Power-PP481-LK-Electric-Cordless-Screwdriver-and-Bubble-Level-Kit-
Overview

Quick-Loader With 6 Bits
2 Position Rotary Handle
On/Off/Forward/Reverse Switch
LED Work light
LED BatteryPower Indicator
On/OffTrigger

INSTRUCTIONS

Choose a bit by lifting it forward.
Pink-Power-PP481-LK-Electric-Cordless-Screwdriver-and-Bubble-Level-Kit-
Instruction-illustration

Insert the bit into the shaft of the screwdriver
Pink-Power-PP481-LK-Electric-Cordless-Screwdriver-and-Bubble-Level-Kit-
Instruction-illustration

UNLOADING THE BIT

Pull the bit out from the shaft and snap back into place.
Pink-Power-PP481-LK-Electric-Cordless-Screwdriver-and-Bubble-Level-Kit-
Instruction-illustration

TO ROTATE THE SCREWDRIVER HANDLE

Press and hold the button on the ❷ Position Rotary H’andfe f) on top of the screwdr:iver and rotate the ti an die c,I ockwise until it locks into place as shown above.
Pink-Power-PP481-LK-Electric-Cordless-Screwdriver-and-Bubble-Level-Kit-
Instruction-illustration

SCREWING/UNSCREWING

Your screwdriver is equipped with a On/Off /Forward/Reverse Switch ❸ to change the rotation of your chuck.

To screw in/forward, press the the side of the Lock/Forward/Reverse Switch ❸ marked “R” all the way in, then press the On/Off Trigger ❻.
To unscrew/reverse, press the the side of the Lock/Forward/Reverse Swltch (3) marked “L” all the way in. then press the On/Off Trigger ❻.

CHARGING YOUR TOOL

Plug the power supply into the screwdriver’s internal battery pack (located on the bottom of the handle). The RED light on the LED Battery Power Indicator ❺ will illuminate while charging. Allow 5 hotfs to fully charge.

CHECKING THE BATTERY LEVEL OF YOUR TOOL

Your screwdriver is equiid With an LED Battery Power lndicator ❺ constsisting of 3 LEDs. While using your tool, you can press the battery indicator button to check the power of your screwdriver. When all 3 lights are on, your tool is fully charged. W’hen only the YELLOW and RED light are on, your screwdriver is at 50% charge. When only the RED light is on, your tool, has less than 25% charge remaining and should be recharged.

TOOL SAFETY

SAFETY

Do not use power tools under the influence of medication, drugs or alcohol as this could result in serious personal injury. Keep hair. clothing, jewelry and other loose objects away from moving parts. Use the proper safety equipment when operaing power tools. This may include eye or dust protection equipment.

The poweir tool plugs should never be m,odffied in any way as this could increase the risk of electric shock of malfunction. The tool shou.ld be in a locked state when not in use.

Do not force use of the power tool. Make sure to always ensure proper balance when using power tools. If your tool is damaged stop use immediately.

WORKING AREA

Keep working area cle.an and well lit. Cluttered and dark areas can lead to accidents. Do not operate power tools in explosive atmospheres, such as fn the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite fumes and dust.

CLEANING AND MAINTENANCE

Remove dust and dirt with a cloth slightly dampened with solution. In doing so, ensure that no water gets into the inner drilL Clean drillings and dust out of the chuck regularly. The drill is permanently lubricated and does not require oili·ng.

BATTERY USE AND CARE

Only use the included charger to charge your battery. Not using the correct charger could cause injury or damage to your tool. Abuse of the tool can lead to battery leakage. Avoid contact wrth battery fluid. If contact occurs, seek med real help immediately. Never attempt to open the battery for any reason. Only charge and store the battery between temperatures of 39°F and 70°F.

DISPOSAL OF BATTERY

To preserve natural resources please recycle or dispose of the battery properly. This product contains lithium batteries. Consult your local waste authority for info.rmation regarding available recycling and/or disposal options.