Pink Power PP201 20 Volt Lithium Ion Vacuum Kit Instruction Manual
- June 17, 2024
- Pink Power
Table of Contents
POWERFUL TOOLS FOR POWERFUL WOMEN
20-VOLT LITHIUM-ION VACUUM LIT
PP201 20 Volt Lithium Ion Vacuum Kit
PP201
Thank you for your purchase!
Ever since we started back in 2011, our mission has been to give YOU the
confidence to tackle something new. Whether you’re building a deck or just
hanging a picture, we’ll be there along the way. We stand behind every
product, which is why they come with a full 3-year warranty. Our contact
information is listed below and you can reach out to us any time. From the
entire Pink Power family, we wish you all the best on your next project!
Thank you!
Need to get in touch?
Register Your Warranty and sign up for free coupons:
Pinkpowerdrill.com/warranty
Questions?
Call or Text Us: 813.304.2224
Email Us:
customerservice@pinkpowerdrill.com
Love your items so much that you want to be a Brand Ambassador?
Join the Pink Power Army by sending your request to:
affiliate@pinkpowerdrill.com
FEATURES:
- Power Switch
- LED Light
- Dust Bin Release Switch
- 6oomL Dust Bin
- Dust Filter
- Extension Tube
- Crevice Tool
- Floor Brush
- Battery Pack
OPERATING INSTRUCTIONS
CHARGING THE BATTERY PACK
Your vacuum comes with a fast charger. The battery pack for this tool has been
shipped in a low charge condition to extend battery life. Remove your charger
and plug it into a power source. A red light on the charger will illuminate.
Place the battery in the charger and a green light will flash. Do not charge
batteries in extreme heat or cold. Make sure to fully charge and discharge the
batteries on the first few uses to help the battery reach full charge. Please
reference the table on the next page for battery charge status. (See Table 1)
INSERTING AND REMOVING THE BATTERY
Slide the battery into the back of the vaccum until you hear a “Click” noise.
To remove the battery, press the button on the front of the battery down and
pull away from the vacuum. This will release the battery.
USING YOUR VACUUM AND ATTACHMENTS
To use as a handheld vacuum you can connect the Crevice Tool directly to the
Dust Bin. For hard to reach areas, connect the Crevice Tool directly to the
Extension Tube. If using to clean floors, connect the Floor Brush to the
Extension Tube. Your vacuum includes a Power Switch that must be held down to
power the unit. This will prolong the life of the battery when not in use.
EMPTYING YOUR DUST BIN
For optimal suction, your Dust Bin should be emptied when it reaches 30%
Capacity. Make sure the unit is powered off and press in the Dust Bin Release
Switch and pull the Dust Bin away from the vacuum. Dispose of debris ina waste
basket. To attach your Dust Bin back the the vaccum, just hold down the Dust
Bin Release Switch and press the Dust Bin into place.
CLEANING YOUR DUST BIN AND FILTER
Remove your Dust Bin by following instructions from the previous section
above. Once removed, twist your Dust Filter counter-clockwise to remove the
Dust Filter. Your Dust Filter can be cleaned using warm water and soap. Allow
your Dust Filter to dry before placing back in the vacuum. Your filter should
be cleaned monthly if using your vacuum multiple times per week.
BATTERY GAUGE
Your battery includes a power gauge on the back of the unit. To check the
power of your battery, press the button on the back of the unit. Below is a
table showing the power level of your battery. When your LED is flashing, it
is time to charge your battery. (See Table 2)
Prefer video tips instead? Go to
Pinkpowerdrill.com/Videos
TOOL SAFETY:
SAFETY
Do not use power tools under the influence of medication, drugs, or alcohol
as this could result in serious injury. Keep hair, clothing, jewelry, and
other loose objects away from moving parts. Use the proper safety equipment
when operating power tools.
Never modify your tools as this could increase the risk of electric shock or
malfunction. Make sure to always ensure proper balance when using power tools.
If your tool is damaged stop use immediately.
WORKING AREA
Keep your working area clean and well tit. Cluttered and dark areas can
lead to accidents. Do not operate power tools in explosive atmospheres such as
in the presence of flammable liquids, gases, or dust. Power tools create
sparks which may ignite fumes and dust.
CLEANING & MAINTENANCE
Always remove the battery before cleaning. Remove dust and dirt with a
slightly damp cloth. Ensure that no water gets into the inner parts of your
tools, battery, and charger. Your tool is permanently lubricated and does not
require oil.
BATTERY USE & CARE
Only use the PP205 charger to charge your battery. Using the incorrect
charger could result in injury or damage to your battery. Do not leave the
battery and charger unattended when charging. Once the battery is fully
charged, remove it from the charger. Abuse of the tool can lead to battery
leakage. Avoid contact with battery fluid. If contact occurs, seek medical
help immediately. Never attempt to open the battery for any reason. Do not
expose your battery to rain or wet conditions. Do not store your battery in
temperatures below 39°F or above 70°F.
OTHER
Do not vacuum materials that are harmful to one’s health. Do not use the
vacuum on liquids or without a filter. Do not vacuum hot or burning materials.
TECHNICAL DATA:
Battery: 20-Volt Lithium-ion
Battery capacity: 1.5Ah
Run time: 18 minutes
Dust Bin capacity: GOOML
Charge time: < 1 hour
TABLE 1
| | Charger has power
---|---|---
| | Battery is charging
| | Battery is fully charged
| | Charging fault
| | Charger is outside operating temperature
TABLE 2
Indicator lamps | Remaining capacity |
---|---|
Lighted | Off |
75% to 100% | |
50% to 75% | |
25% to 50% | |
0% to 25% | |
Charge thebattery. |
Follow us for discounts and fun!
@shoppinkpower
pinkpowerdrill.com/blog
Documents / Resources
| Pink
Power PP201 20 Volt Lithium Ion Vacuum
Kit
[pdf] Instruction Manual
PP201 20 Volt Lithium Ion Vacuum Kit, PP201, 20 Volt Lithium Ion Vacuum Kit,
Lithium Ion Vacuum Kit, Vacuum Kit
---|---