Pink Power 3.6 Volt Electric Screwdrver User Guide
- June 17, 2024
- Pink Power
Table of Contents
POWERFUL TOOLS FOR POWERFUL WOMEN
3.6-VOLT ELECTRIC
SCREWDRIVER
PP481-LK
3.6 Volt Electric Screwdrver
Thank you for your purchase!
Ever since we started back in 2011, our mission has been to give YOU the
confidence to tackle something new. Whether you’re building a deck or just
hanging a picture, we’ll be there along the way. We stand behind every
product, which is why they come with a full 3-year warranty. Our contact
information is listed below and you can reach out to us any time. From the
entire Pink Power family, we wish you all the best on your next project!
Thank you!
Need to get in touch?
Register Your Warranty and sign up for free coupons:
Pinkpowerdrill.com/warranty
Questions?
Call or Text Us: 813.304.2224
Email Us:
customerservice@pinkpowerdrill.com
Love your items so much that you want to be a Brand Ambassador?
Join the Pink Power Army by sending your request to:
affiliate@pinkpowerdrill.com
Follow us for discounts and fun!
@shoppinkpower
pinkpowerdrill.com/blog
3.6-VOLT ELECTRIC SCREWDRIVER
FEATURES:
- Quick-loader with 6 Bits
- 2 Position Rotary Handle
- Forward/Reverse Switch
- LED Light
- Battery Power Gauge
- ON/OFF Trigger
OPERATING INSTRUCTIONS:
CHARGING YOUR TOOL
Plug the power supply into the screwdriver’s internal battery pack (located
at the bottom of the handle). The Red light on the Battery Power Gauge wvill
illuminate while charging. Allow 3 hours to fully charge. Once your tool is
charged, you must unplug the power supply before using your tool. BATTERY
GAUGE
Your screwdriver is equipped with a Battery Power Gauge on the top of the
screwdriver. While using your tool, you can press the Battery Power Gauge
button to check the power of your screwdriver. If all 3 lights are
illuminated, your battery is fully charged. If 2 lights are illuminated, your
battery is at 50% charge. If just one light is illuminated, you need to
recharge the screwdriver.
SCREWING & UNSCREWING
Your screwdriver is equipped with a Forward/Reverse Switch to change the
rotation of your chuck.
- To screw in/forward, press the side of the Forward/Reverse Switch marked “R” and then press the ON/OFF Trigger.
- To screw unscrew/reverse, press the side of the Forward/Reverse Switch marked “L” and then press the ON/OFF Trigger.
LOADING & UNLOADING THE BIT
Choose a bit by lifting it forward, then insert it into the shaft of the
screwdriver.
To unload, pull the bit out from the shaft and snap it back into place.
ROTATING THE SCREWDRIVER HANDLE
Press and hold the button on the 2 Position Rotary Handle on top of the
screwdriver and rotate the handle clockwise until it locks into place as shown
on the right.
LED LIGHT
Your screwdriver comes with an LED light that will automatically turn on
when the trigger is pulled. This helps when working in dim areas such as a
closet or cabinet. Prefer video tips instead? Go to
Pinkpowerdrill.com/Videos
TOOL SAFETY:
SAFETY
Do not use power tools under the influence of medication, drugs, or alcohol
as this could result in serious injury. Keep hair, clothing, jewelry, and
other loose objects away from moving parts. Use the proper safety equipment
when operating power tools.
Never modify your tools as this could increase the risk of electric shock or
malfunction. Make sure to always ensure proper balance when using power tools.
If your tool is damaged stop use immediately.
WORKING AREA
Keep your working area clean and well lit. Cluttered and dark areas can
lead to accidents. Do not operate power tools in explosive atmospheres such as
in the presence of flammable liquids, gases, or dust. Power tools create
sparks which may ignite fumes and dust.
CLEANING & MAINTENANCE
Ensure that the screwdriver is not plugged in before cleaning. Remove dust
and dirt with a slightly damp cloth. Ensure that no water gets into the inner
parts of your tools, battery, and charger. Your tool is permanently lubricated
and does not require oil.
BATTERY USE & CARE
Only use the included charger to charge your battery. Using the incorrect charger could result in injury or damage to your battery. Do not leave battery and charger unattended when charging. Once the battery is fully charged, remove it from the charger. Abuse of the tool can lead to battery leakage. Avoid contact with battery fluid. If contact occurs, seek medical help immediately. Never attempt to open the battery for any reason. Do not expose your battery to rain or wet conditions. Do not store your battery in temperatures below 39°F or above 70°F.
TECHNICAL DATA:
Rechargable battery : 3.6V
No-load speed (RPM) : 200
Drill chuck capacity: 1/4”
Charge time: 2-3 hours
Charger rating input: 100-240V AC 50/60HZ
Charger rating output: 5V DC 700mA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>