Pink Power PP204 20 Volt Lithium Ion Sander Kit Instruction Manual
- June 17, 2024
- Pink Power
Table of Contents
POWERFUL TOOLS FOR POWERFUL WOMEN
20-VOLT LITHIUM-ION SANDER KIT
PP204 20 Volt Lithium Ion Sander Kit
PP204
Thank you for your purchase!
Ever since we started back in 2011, our mission has been to give YOU the
confidence to tackle something new. Whether you’re building a deck or just
hanging a picture, we’ll be there along the way. We stand behind every
product, which is why they come with a full 3-year warranty. Our contact
information is listed below and you can reach out to us any time. From the
entire Pink Power family, we wish you all the best on your next project!
Thank you!
Need to get in touch?
Register Your Warranty and sign up for free coupons:
Pinkpowerdrill.com/warranty
Questions?
Call or Text Us: 813.304.2224
Email Us:
customerservice@pinkpowerdrill.com
Love your items so much that you want to be a Brand Ambassador?
Join the Pink Power Army by sending your request to:
affiliate@pinkpowerdrill.com
FEATURES:
- Soft-grip Handle
- ON/OFF Switch
- Hook and Loop Pad
- Dust Collection Box
- Washable Filter
- Battery Pack
OPERATING INSTRUCTIONS
CHARGING THE BATTERY PACK
Your sander comes with a fast charger. The battery pack for this too] has been
shipped in a low charge condition to extend battery life. Remove your charger
and plug it into a power source. A red light on the charger will illuminate.
Place the battery in the charger and a green light will flash. Do not charge
batteries in extreme heat or cold. Make sure to fully charge and discharge the
batteries on the first few uses to help the battery reach full charge. Please
reference the table on the next page for battery charge status. (See Table 1)
INSERTING AND REMOVING THE BATTERY
Before placing the battery in the sander, make sure the ON/OFF Switch is in
the “OFF” position. Slide the battery into the back of the sander until you
hear a “Click” noise. To remove the battery, press the button on the front of
the battery down and pull the battery directly out of the sander. This will
release the battery.
APPLYING AND REMOVING YOUR ABRASIVE PAPER
Your sander comes with three pieces of sandpaper (P80, P120 and P180). Lower
numbers are used for projects like stripping paint from wood. Medium numbers
are used for general sanding of bare wood without paint or primer applied. The
highest numbers are used for finishing your projects and will give you a
smooth surface. Once you choose the correct sandpaper, make sure your tool is
switched OFF and place the sandpaper on the Hook and Loop Pad. When you want
to change sandpaper, just pull the paper from the Hook and Loop Pad and
install a different piece.
INSTALLING AND EMPTYING THE DUST COLLECTION BOX
To install the Dust Collection Box, press the clips on each side and push into
the sander. Make sure your sander is not ON when installing. We recommend you
empty your Dust Collection Box when it is about 30% full. To empty, switch
your sander off and press the clips on the side and pull the box away from the
sander. You can empty the box by tapping lightly. For thorough cleaning, you
can remove the Dust Filter on the top and rinse with warm water.
BATTERY GAUGE
Your battery includes a power gauge on the back of the unit. To check the
power of your battery, press the button on the back of the unit. Below is a
table showing the power level of your battery. When your LED is flashing, it
is time to charge your battery. (See Table 2)
Prefer video tips instead? Go to
Pinkpowerdrill.com/Videos
TOOL SAFETY:
SAFETY
Do not use power tools under the influence of medication, drugs, or alcohol as
this could result in serious injury. Keep hair, clothing, jewelry, and other
loose objects away from moving parts. Use the proper safety equipment when
operating power tools. Never modify your tools as this could increase the risk
of electric shock or malfunction. Make sure to always ensure proper balance
when using power tools. If your tool is damaged stop use immediately.
WORKING AREA
Keep your working area clean and well lit. Cluttered and dark areas can lead
to accidents. Do not operate power tools in explosive atmospheres such as in
the presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite fumes and dust.
CLEANING & MAINTENANCE
Always remove the battery before cleaning. Remove dust and dirt with a
slightly damp cloth. Ensure that no water gets into the inner parts of your
tools, battery, and charger. Your tool is permanently lubricated and does not
require oil.
BATTERY USE & CARE
Only use the PP205 charger to charge your battery. Using the incorrect charger
could result in injury or damage to your battery. Do not leave battery and
charger unattended when charging. Once the battery is fully charged, remove it
from the charger. Abuse of the too! can lead to battery leakage. Avoid contact
with battery fluid. If contact occurs, seek medical help immedi&tely. Nevér
attempt to open the battery for any reason. Do not expose your battery to rain
or wet conditions. Do not store your battery in temperatures below 39°F or
above 70°F.
TECHNICAL DATA:
Battery: 20-Volt Lithium-ion
Battery capacity: 1.5Ah
Orbits per minute: 11,000 OPM
Charge time: <1 hour
Weight (tool and battery): 2.7lbs
TABLE 1
| | Charger has power
---|---|---
| | Battery is charging
| | Battery is fully charged
| | Charging fault
| | Charger is outside operating temperature
TABLE 2
| Indicator lamps | Remaining capacity |
|---|---|
| Lighted | Off |
| 75% to 100% | |
| 50% to 75% | |
| 25% to 50% | |
| 0% to 25% | |
| Charge thebattery. |
Follow us for discounts and fun!
@shoppinkpower
pinkpowerdrill.com/blog
Documents / Resources
| Pink
Power PP204 20 Volt Lithium Ion Sander
Kit
[pdf] Instruction Manual
PP204 20 Volt Lithium Ion Sander Kit, PP204, 20 Volt Lithium Ion Sander Kit,
Lithium Ion Sander Kit, Sander Kit
---|---