Avantree BTSP-870 Portable FM Radio with Bluetooth Speaker User Manual
- June 17, 2024
- Avantree
Table of Contents
Avantree BTSP-870 Portable FM Radio with Bluetooth Speaker
Contact Us
- Support Tickets avantree.com/submit-a-ticket
- Support Email support@avantree.com
- USA / CA +1800 232 2078 (9am-6pm PST, Mon-Fri )
- UK +44 20 8068 2023 (9am-6pm, GMT, Mon-Sat)
- DE +49 32221097297 (11am-9pm, CET, Mon-Sat )
- FR + 33 176340312 (11am-9pm, CET, Mon-Sat )
- IT +39 06 9480 3330 (9am-6pm, CET, Mon-Sat )
- ES + 34 931786261 (9am-6pm, CET, Mon-Sat )
- AU + 61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)
- Live Chat avantree.com (18/h weekday
- Video Guide avantree.com/boombyte/video
- FAQ avantree.com/support/boombyte
- Product Registration avantree.com/product-registration
Product Overview
Button Functions
Use as an FM Radio
-
Step1: Turn on the Boombyte
Rotate the volume control clockwise to ON; the LCD screen will light up.
For 1st time use, it will start auto-scanning for channels. If not, press and hold the FM button to start auto-scanning. Please wait until the auto-scanning complete. -
Step 2: Tune into channels
Press the <SEEK / SEEK> buttons to choose your desired channel.
Or you can directly input the channel frequency using the number pad, e.g., for FM102.5, press the number sequence 1-0-2-5.
Or press and hold the <SEEK / SEEK> button, it will scan up / down for the next clear channel. -
Step 3: Save and play your favorite channels
Save channels to the number pad for quick access – Find local FM channels as described above, then save any channel for quick access by pressing and holding the number pad until the screen displays “Channel Saved”. You can save up to 9 channels.
Play the saved channels – Click the corresponding number pad button once.
Use as a Bluetooth Speaker
- Pair and connect – Turn the speaker on, press the MODE button once to enter Bluetooth speaker mode, and then activate Bluetooth on your device (i.e., phone, tablet, laptop etc.) and search for “Avantree Boombyte” to pair and connect.
- To reconnect – Each time you turn it on and enter Bluetooth mode, the speaker should automatically reconnect to the last connected device. If not, select “Avantree Boombyte” on your device.
Use as a MicroSD Card Player
When you insert a microSD card (not included) while the radio is on, it will
automatically switch to microSD mode.
If you insert the card when the radio is off, you’ll need to press the MODE
button to switch to microSD mode. The Boombyte supports MP3 / WMA / WAV file
formats, and the max storage capacity of the SD card is 32GB. Repeat / shuffle
settings – Press the button to enter the settings menu and press the again to
enter “Repeat / Shuffle”. Press the <SEEK / SEEK> to select your desired
option and press once to confirm.
Use as a U Disk Player
Follow the instructions for the MicroSD card player above, swapping “microSD
card” with “U Disk”. Make sure to press the “MODE” button to switch to U disk
mode.
Charging
A icon will flash on the Boombyte’s screen to indicate low battery. You can charge the radio using any USB adapter with a 5V/0.5-1A.output (i.e..your.phone.charger.or.similar).via the included USB.C. charging cable.- The icon on the LCD screen will flash while charging and stop once charging is complete. It takes about 3 hours to fully charge the radio.
Configuring the System Settings
Turn on the device and press & hold the button to enter the system settings. Press the <SEEK / SEEK> to select the desired option (Backlight, language, contrast, factory reset…) and press once to confirm.
FAQ
Below are some of the most common questions people have during setup.
Why is my FM reception so bad?
Why is my microSD card not working?
For answers to questions like these and for a full FAQ list, you can visit
avantree.com/support/boombyte, or you
can contact us directly for additional assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>