ZOSI C186A Smart IP Camera User Guide

June 17, 2024
ZOSI

ZOSI-logo

ZOSI C186A Smart IP Camera

Specifications

  • Dimensions: Available on support.zositech.com
  • Weight: Not specified
  • Operating Temperature: Not specified
  • Operating Humidity: Not specified
  • Ingress Protection Rating: Not specified

Product Information

The Smart IP Camera from ZOSI is a high-quality camera that offers various features for effective surveillance. It comes with a Micro SD card slot, a built-in microphone, speaker, lens, warm lights, power port, network cable port, and a reset button for easy operation. The camera is designed for indoor and outdoor use with its waterproof lid.

Product Usage Instructions

Connection Setup
Before setting up the camera, follow these steps:

  1. Connect the camera to a ZOSI NVR with an Ethernet cable.
  2. Connect the NVR to the router and power the camera through the NVR using a 12V DC power adapter or PoE power supply device.

Camera Installation
To mount the camera:

  1. Drill holes according to the mounting template provided.
  2. Attach the camera bracket using the screws included in the package. Run cables through the cable notch on the mounting base.
  3. Adjust the camera angle and secure it in place.
  4. Install the camera 8-16 ft (2.5-5m) above the ground for optimal performance.

Initial Setup
To set up the camera:

  1. Download and launch the Zosi Smart App or client software.
  2. Follow the on-screen instructions to complete the initial setup.
  3. If connecting to a Zosi PoE NVR, set up the camera via the NVR interface.

Note on Installation Distance, Height, and Angle
The accuracy of human detection is influenced by factors like distance from the camera, person’s height, camera’s height and angle. Night vision performance is also affected by these factors.

FAQ
If you encounter persistent issues, please contact Zositech Support for assistance.

Quick Start Guide
Smart IP Camera

This guide will get you going with your camera. For more information, please visit our official website: www.zositech.com

What’s in the Box

ZOSI-C186A-Smart-IP-Camera-fig- \(1\)

NOTE: The number of accessories varies with the camera model you purchased.

Camera Introduction

ZOSI-C186A-Smart-IP-Camera-fig- \(2\)

Connection Diagram

Before the initial setup, please follow these steps to connect the camera:

  1. Connect the camera to the ZOSI NVR(not included) with an Ethernet cable.
  2. Connect the NVR to the router and power the camera through the NVR.
    NOTE: The camera requires a 12V DC power adapter or PoE power supply device, such as a PoE switch, PoE injector, or ZOSI PoE NVR (none of the above included in the package).ZOSI-C186A-Smart-IP-Camera-fig-
\(3\)

NOTE: You may also connect the camera to a PoE switch or POE injector. (PoE switch/POE injector not included)

Set up the Camera

Download and launch the Zosi Smart App or client software and follow the on- screen instructions to complete the initial setup.

  • On Smartphone
    Scan to download Zosi Smart App.

  • On PC

Install the Camera

Installation Precautions

  • Do not face the camera to any light source.
  • Do not point the camera at glass windows or reflective objects. Otherwise, it may result in poor image performance due to reflections from infrared LEDs, ambient lights or status lights.
  • Do not mount the camera in shaded area, and point the camera towards a well-lit area. For better image quality, make sure the camera and the captured subject are at the same lighting conditions.
  • It is recommended that the camera be installed as far away as possible from electronic devices such as microwaves, televisions, radio phones and baby monitors to prevent signal interference.
  • It is recommended to clean the lens with a soft cloth from time to time.
  • Do not expose the power port to water or moisture, or blocked by dirt or other things.
  • Do not install the camera where rain and snow may hit the lens directly.
  • Camera may work in extremely cold conditions as low as -10°C as it will produce heat when powered on. You may power the camera indoors for a few minutes before installing it outdoors. (Only for outdoor cameras)

Mount the Camera to the Wall

  1. Drill holes according to the mounting template.
    NOTE: Use the anchors included in the package if needed.ZOSI-C186A-
Smart-IP-Camera-fig- \(5\)

  2. Attach the camera bracket with screws included in the package. NOTE: Run the cables through the cable notch on the mounting base.

  3. Loosen the knob and adjust the camera to a proper angle.

  4. Twist the knob to secure the camera in place.ZOSI-C186A-Smart-IP-Camera-fig- \(6\)

Installation Distance, Height and Angle

  • Distance: Best accuracy for objects within 5-50 ft (1.5-15 m).
  • Angle: Tilt the camera down about 30°-60° from the horizontal position.
  • Height: Install the camera 8-16 ft (2.5-5m) above the ground.ZOSI-C186A-Smart-IP-Camera-fig- \(7\)

NOTE: The accuracy of human detection will be affected by various factors, such as the distance between the person and the camera, the height of the person, the height and angle of the camera, etc. The accuracy and distance of detection will also be affected in the night vision environment.

FAQ

  • Q: Camera cannot Turn On?
    If your camera is not powering on, please try the following solutions:

    • Make sure your camera is powered on properly. The PoE camera should be powered by a PoE switch/injector, a PoE NVR or 12V power adapter.
    • If the camera is connected to a PoE device as listed above, connect it to another PoE port and check again.
    • Try again with another Ethernet cable.
  • Q: Image’s Not Clear?

    • Check if there is dirt, dust, or other debris on the camera lens, and clean the lens with a soft, clean cloth.
    • Check if there is dirt, dust, or other debris on the camera lens, and clean the lens with a soft, clean cloth.
    • Update the camera firmware to the latest version.
    • Reset the camera to factory settings and try again.
  • Q: Spotlights’ Not Turning On?
    If the spotlights on your camera are not turning on, please try the following solutions:

    • Ensure that the spotlights are enabled through the Zosi Smart App/Client on the device settings page. Update the camera firmware to the latest version.
    • Reset the camera to factory settings and check the spotlight settings again.
  • Q: Does the Camera Support Motion Detection and Image Capture?

    • The camera automatically captures images when it detects people, cars, or any changes in the detected image.
    • Users can also manually capture images using the Zosi Smart App.
      If the problem persists, please contact Zositech Support.

Specifications

Dimensions 66x85x187mm
Weight 350g
Operating Temperature -10°C to 55°C (14°F to 131°F)
Operating Humidity 10% – 90%
Ingress Protection Rating IP66

For more specs, please visit https://support.zositech.com

Notification of Compliance

CE FCC Compliance Statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including inference that. may cause undesired operation.

Simplified EU Declaration of Conformity
ZOSI declares that the device is in compliance with the essential requirements and other relevant provisions if Directive 2014/30/EU.

Correct Disposal of this Product
This marking indicates that this product cannot be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased. They can take this product away for environmentally safe recycling.

www.zositech.com

Copyright © 2023 ZOSI Technology Co., Ltd.
No part of this publication may be reproduced in any way without the written permission of ZOSI. The information in this publication is believed to be accurate in all respects. ZOSI assumes no responsibility for any consequenc-es resulting from their use. As our products require continuous improvement,ZOSI reserves the right to modify product designs, specifications and prices without notice and without any obligation. All rights reserved,and ZOSI reserves the final interpretation right of this manual.

ZOSI-C186A-Smart-IP-Camera-fig- \(9\)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals