VIVO STAND-V002LG Dual Monitor Desk Stand with Tempered Glass Base Instruction Manual

VIVO STAND-V002LG Dual Monitor Desk Stand with Tempered Glass Base

Product Information

• Specifications:
  • Brand: VIVO
  • Model: STAND-V002LG
  • Weight Capacity: 22 lbs Per Arm (10 kg)
  • Materials: Glass Base, Metal Components
  • Colour: Black
  • Adjustability: Tilt and Swivel
  • Compatibility: Fits most 13″ to 27″ monitors
  • Assembly Required: Yes

Product Usage Instructions

• Package Contents:
  • Before starting the assembly process, ensure you have all the following components:
  • (x2) VESA Plate
  • (x2) Tilt Joint
• Assembly Steps:
  • Step 1: Attach the Support Plate to the Lower Pole
  • Remove the protective film from the Foam Pad and attach the Support Plate to the Lower Pole using the provided screws and Allen Wrench.

FAQs

• Q: What is the weight capacity of each arm of the monitor stand?
  • A: The weight capacity of each arm is 22 lbs (10 kg).
• Q: Can this stand to accommodate curved-back monitors?
  • A: Yes, the stand provides options for both flat-back and curved-back monitors.

INTRODUCTION

WARNING:

• If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com. for further assistance.
• Check carefully to make sure there are no missing or defective parts.
• Improper installation may cause damage or serious injury.
• Do not use this product for any purpose that is not explicitly specified in this manual.
• Do not exceed weight capacity.
• We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

TIP OVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
• THE USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

TOOLS NEEDED

• DO NOT EXCEED WEIGHT CAPACITY
  • Failure to do so may result in serious injury.

ASSEMBLY STEPS

• STEP 1
  • Remove the protective film from the Foam Pad (G) and apply the Support Plate (H).
  • Attach Support Plate (H) to Lower Pole (D) using M6x16mm Screws (S-B) and 4mm Allen Wrench (T-A).
• STEP 2
  • Attach Pole Assembly to Base (C) using M6x10mm Screws (S-A), M6 Washers (S-C), and 4mm Allen Wrench (T-A).
• STEP 3
  • Remove the protective film from Feet (J) and apply it to the bottom of Base (C).
  • Remove the protective film from Felt Pads (K) and apply them to the bottom of Feet (J).
• STEP 4
  • Slide Plastic Cover (I), Pole Cable Clip (L), and Tilt Joint (B) onto Lower Pole (D).
  • Use a 6mm Allen Wrench (T-B) to lock the position of the Tilt Joint (B).
• STEP 5
  • Press Pole Cap (F) into Upper Pole (E) on the side without internal threading.1
  • Thread the Upper Pole (E) onto the Lower Pole (D).
• STEP 6
  • Slide Pole Cable Clip (L) and Tilt Joint (B) onto Lower Pole (D).
  • Use a 6mm Allen Wrench (T-B) to lock the position of the Tilt Joint (B).
• STEP 7
• STEP 8
  • Slide VESA Plates (A) with monitors onto Tilt Joints (B), and secure using Thumbscrews (S-D).
• STEP 9
  • Adjust the tilt in Tilt Joints (B) using a 6mm Allen Wrench (T-B).
• STEP 10
  • Route cables through Cable Clips (L).
  • Adjust monitors as desired and Store Allen Wrenches (T-A, T-B) in Cable Clips (L).

Love your new VIVO setup and want to share?

• Tag us in your photo! @vivo_us.
• LAST UPDATED: 07/05/2023 REV 1
• Open Monday – Friday 7:00 am – 7:00 pm CST, our dedicated support team can offer immediate assistance with rapid response times.
• If any parts are received damaged or defective, please contact us.
• We are happy to replace parts to ensure you have a fully functioning product.
• 309-278-5303 AVG.
• RESOLUTION TIME (within office hrs): 5M 4S
• Chat live with an agent! www.vivo-us.com.
• AVG. RESOLUTION TIME (within office hrs): < 15 M
• help@vivo-us.com.
• AVG. RESPONSE TIME (within office hrs): 1HR 8M
  • 23% within < 15m
  • 38% within < 30m
  • 61% within < 1hr
  • 83% within < 2hr
  • 92% within < 3hr
• FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com.
• SKU: STAND-V002LG
• Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
• https://vivo-us.com/products/stand-v002lg.
• GET IN TOUCH: Monday-Friday from 7:00 am-7:00 pm CST
• help@vivo-us.com.
• Chat live with an agent!www.vivo-us.com.
• 309-278-5303

References

• Register a .US.COM domain today!
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
• Dual Vertical Monitor Desk Stand with Glass Base – VIVO - desk solutions, screen mounting, and more

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>