QCY T13 Descargar Wireless Earbuds Bluetooth 51 Headphones Touch Control Instruction Manual
- June 17, 2024
- QCY
Table of Contents
QCY T13 Descargar Wireless Earbuds Bluetooth 51 Headphones Touch Control
For better using experience,please scan to download QCY app before start-up.
Overview
Choose Eartips
Please try middle eartips first as they fit most people
Above pictures are for reference only and practical items may vary.
How to Connect
Open lid and pick up earbuds to power them on, On phone, search for QCY-T13 and tap to connect. Power on earbuds and they will auto reconnect to the last phone in connectivity records, if any.
One Press to Turn Connectable
- Earbuds have been connected to phone.
- Push earbuds into case, open case and keep pressing button on case for 3s or until LED blinks green 3 times. Pick up earbuds again to turn them connectable.
Factory Setting
Push earbuds into case and keep pressing button on case for 10s or until LED blinks red and blue 3 times to reset and power on earbuds.
LED for Battery Level (Press the Button)
- Battery level>90%: green
- Battery level between 90% and 50%: blue
- Battery level<50%: red
LED
-
LEDs on Earbuds
LED will turn solid red when earbuds are charging and turn blue for 1 minute once they are topped up -
LED on Case
LED will turn solid red when case is charging and turn solid green once it is topped up
Instruction
- Power-on: keep touching the panel for 1 .5s
- Power-off: push earbuds back in case
- Answer/end call: double touch the panel
- Ignore call: keep touching the panel for 1.5s
- Skip track backward: keep touching left panel for 1.5s
- Skip track forward: keep touching right panel for 1.5s
- Voice assistant: triple touch left panel
- Playback/pause: double touch the panel
- Low-latency mode: triple touch right panel
Warranty Card
Warranty Period
12 months after you purchase this item {or you may inquire your local shopper
for more details).
Free Service:
Supposing any defects caused by quality issues occur within the warranty
period , please take this warranty card and purchase receipts to your
distributor for free exchange service.
- Model Number
- Date of Purchasing
- User’s Name:
- User’s Phone
- User’s Address
- Shop’s Name:
- Shop’s Address
- Comments
Free exchange service will not be accessed under following circumstances:
- Damages caused unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by act of God, Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing
FCC Statement
This equipment has been tested and found to comply with the imits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Tips
- Before using the earbuds, please read the manual carefully and keep it for future references.
- The earbuds need to be fully charged prior to first-time use.
- If the earbuds are left unused for over two weeks, please recharge.
- Please use the chargers made by qualified manufacturer If earbuds fail to be found by phone, please return them connectable or restore factory settings.
- If a program error of phone occurs, please turn off and on Bluetooth function or reboot the phone.
Caveats
- Never disassemble or modify your earbuds for any reasons to avoid any damages and danger
- Do not store the earbuds in extreme temperatures (under 0° c or over 45° Cl.
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to avoid dysfunction and increasing risk of electricshock
- Do not use harsh chemicals or strong detergents to clean the earbuds
Note: please do not use earbuds for a long time as may damage your hearing
Notes: Please arrange using time properly as your hearing may be damaged
by using the device for a long time.
Manufacturer: Dongguan Hele Electronics Co,, Ltd.
Address: No, 325 Yuehui Rd, Daojiao Town Dongguan City Guangdong Province
China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>