QCY T8S True Wireless Bluetooth 5.0 Earbuds Instruction Manual

June 17, 2024
QCY

QCY T8S True Wireless Bluetooth 5.0 Earbuds

QCY-T8S-True-Wireless-Bluetooth-5.0-Earbuds-PRODUCT

For better using experience,please scan to download QCY app before start-up.

Overview

QCY-T8S-True-Wireless-Bluetooth-5.0-Earbuds-2

How to Connect

First Time Connectivity:
Open the case and earbuds will auto power-on and pair with each other. Master earbud will auto turn connectable to phone, with LED on slave turning off. On phone, search for QCYT8S and tap to connect both earbuds to phone.”

Switch Connected Device:

  1. Turn off Device A’s Bluetooth and earbuds will auto disconnect and turn connectable.”
  2. On Device B, search for QCY-T8S and tap to connect.
  3. Multi-point connection is not available and earbuds will auto reconnect to Device B upon powering up again.

Factory Setting

Open the Lid and hold charging case button untiU LED of the case shows red, green and blue. Close the lid to reset earbuds to factory.
Manual pairing: Power off both earbuds. Keep touching both panels for 5s or until LEDs blink red and green. Double touch panels to pair both earbudswith each other. LEDs will blink red and green then that on slave earbud will tum off. These earbuds will turn connectable to phone after they finish the pairing.

One Press to Switch Connection:
Open lid, push earbuds into case and keep pressing charging case button until LED glows solid green. Earbuds will then get disconnected from DeviceA.
On DeviceB, search and tap QCY-T8S to connect.
Multi-point connection is not available and earbuds will auto reconnect to Device B upon powering up again.

How to Wear

  1. Rotate earbud and pop it into your ear then shake head to check its stability.
  2. Please adjust Mic towards your mouth to gain better calling experience.
  3. Please wear earbuds properly, making sure they fit in firmly and sound holes are inside ear channels
  4. You may turn on/off In-ear Detection in APP

Three-way Calling & Switch
Double touch either panel to answer incoming call. If another call is coming in sync, double touch again to put the first call on hold while activating the second call or keep touching the panel for 1s to ignore the second call.
After activating the second call, you may switch between a held call and active call by keeping touching the panel.

Mono Mode

  1. Power off earbuds. Keep touching either panel for 5s to turn earbud connectable{LED blinks red and green).
  2. On phone, search for QCY-TBS and tap to connect

Charging Earbuds
Push earbuds into the case and close the lid. Earbuds will auto power off and get charged.

Charging Case
Charge the case via USB cable. LED will blink red when battery is less than 60%, blink green when between 60% and 95% and blink blue when over 95%. LED will glow solid blue once top up.

Function

Function Current status Operation LED Prompt
Power-on Earbuds are not in the case Keep touching the panel for 2s

LED glows greer for 1s

|

TONE

Earbuds are in the case with its lid closed(the case is within power)| Open the lid
Power-off| Case is within power

I

| Push earbuds into case and close the lid

Keep touching the panel for 5s

| LED blinks red for 1s|

TONE

Answer/end call| Incoming call/ calling| Double touch the panel to answer/end the call| | TONE
Ignore call

Voice assistant

| Incoming call

Connected

| Keep touching the panel for 1s

Triple touch the left panel

| \

\

| TONE

TONE

Music pause/ resume playing

|

Playing

| 1. Double touch

2. Take off either earbud to pause and put it on in 15s to resume playing

| | \
Skip track| Playing| Keep touching right/left panel for 2s to skip track forward/backward| | \
Switch call to earbuds| Call is handled by phone| Keep touching the panel for 1s| | TONE
Switch call to phone| Call is handled by earbuds| Keep touching the panel for 1s| | TONE
Gaming mode| Streaming / Gaming| Triple touch the right panel to switch on/off gaming mode| | TONE

Warranty Card

Warranty Period
12 months after you purchase this item (or you may inquire your local shopper for more details).

Free Service:
Supposing any defects caused by quality issues occur within the warranty period , please take this warranty card and purchase receipts to your distributor for free exchange service.

  • Model Number:
  • Date of Purchasing:
  • User’s Name:
  • User’s Phone:
  • User’s Address:
  • Shop’s Name:
  • Shop’s Address:
  • Comments:

Free exchange service will not be accessed under following circumstances:

  1. Damages caused unauthorized disassembly.
  2. Defects or physical damages caused by leaking or dropping off.
  3. Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

FCC Statement

This equipment has been tested and found to comply with the imits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Hazardous substances and their contents in the item


Part Name

| | | Hazardous| Substances| |
---|---|---|---|---|---|---
Pb

X

| Hg

0

| Cd

0

| NCrII 0| PBB

0

| PBDE

0

| DIBP DEHi

0  0

| DBP

0

| BBP

0

Maintxx:ly| 0| 0| 0| 0| 0| 0| 0  0| 0| 0
Batte,y| 0| 0| 0| 0| 0| 0| 0  0| 0| 0
Ear tips| 0| 0| 0| 0| 0| 0| 0  0| 0| 0
lo.ccessories| | | | | | | | |
| X| 0| 0| 0| 0| 0| 0  0| 0| 0
This form is made by SJ/T 11364 regulation.

O : means that hazardous substance content in the homogeneous materials of this part is within the limits of (EUl 2015/863 regulation.

X: means that hazardous substance content in, at least,

one certain homogeneous material of this part is beyond the limits of (EU) 2015/863 regulation, but there is no mature alternative in the industry at present, it still conforms to the EU ROHS Directive in the scope of exemption.

Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City
Guangdong Province China

Tips

  1. Before using the earbuds, please read the manual carefully and keep it for future references.
  2. The earbuds need to be fully charged prior to first-time use.
  3. If the earbuds are left unused for over two weeks, please recharge.
  4. Please use the chargers made by qualified manufacturer.
  5. If earbuds fail to be found by phone, please re-turn them connectable or restore factory settings. If a program error of phone occurs, please turn off and on Bluetooth function or reboot the phone.

Caveats

  1. Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
  2. Do not store the earbuds in extreme temperatures (under 0 ° c or over 45° C).
  3. Avoid using the indicator close to the eyes of children or animals.
  4. Do not use the earbuds during a thunderstorm to avoid dysfunction and increasing risk of electricshock,
  5. Do not use harsh chemicals or strong detergents to clean the earbuds.

Note: please do not use earbuds for a long time as may damage your hearing.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

QCY User Manuals

Related Manuals