QCY HT05 True Wireless Earbuds User Manual
- June 17, 2024
- QCY
Table of Contents
QCY Melobuds ANC
True Wireless Earbuds
https://mapp.qcymall.com/qcyearphones/zh/download/qcy
For better use experience,please scan to download QCY APP before start-up.
Overview
Choose Eartips
Please try medium eartips first as they fit most people.
Above pictures are for reference only and practical items may vary.
How to Connect
First Time Connection:
- Pick up both earbuds, pop them back in case then close lid to activate them.
- Open lid, pick up earbuds and they will auto power on, On phone, search QCY Melobuds ANC and tap to connect.
How to Switch Connection Between Two Devices
Push earbuds into case, open lid and keep pressing charging case button for 3s
or until LEDs on earbuds blink white. Then pick up earbuds. On device, search
QCY Melobuds ANC and tap to connect.
- Earbuds cannot get connected with two phones at the same time. They will auto reconnect to the last phone in connectivity record, if any.
Factory Setting
- Push earbuds into case, open lid and keep pressing charging case button for 10s to set earbuds to factory (LEDs on earbuds blink white 5 times).
- After factory setting, earbuds will auto pair with each other and turn connectable to phone when picked up.
Charging Earbuds
LED will glow solid red when earbuds are charged and turn white for 30s
when topped up.
Charging Case
LED will glow solid red when case is charged and turn solid white when topped
up.
How to Wear
- Please put on earbuds properly then adjust them to fit yourself.
- Set microphone towards your mouth.
- It will cause a bad calling or listening experience to wear them in a wrong way.
LED on Case
Battery level of case ≥ 20% (white)
Battery level of case < 20% (Red)
Functions
| Power-on: Keep pressing touch panel for 1.5s
---|---
| Power-off: Push earbuds into case
| Answer/end call: Double press touch panel
| Ignore call: Keep pressing touch panel for 1.5s
| Skip track forward: Triple press right touch panel
| Voice assistant: Triple press left touch panel
| Playback/pause: Double press left/right touch panel to play/pause
| Gaming mode: Keep pressing left touch panel for 1.5s
| ANC mode: Keep pressing right touch panel for 1.5s to switch among ANC,
Normal and Transparency modes
Warranty Card
Warranty Period
12 months after you purchase this item (or you may inquire your local
shopper for more details).
Free Service:
Supposing any defects caused by quality issues occur with in the warranty
period , please take this warranty card and purchase receipts to your
distributor for free exchange service.
Model Number:
Date of Purchasing:
User’s Address:
Shop’s Name:
Shop’s Address:
Free exchange service will not be accessed under following circumstances:
- Damages caused unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by act of God. Supposing your item is with in any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
FCC Statement
This equipment has been tested and found to comply with the imits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for hetp.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Tips
- Before using the earbuds, please read the manual carefully and keep it for future references.
- The earbuds need to be fully charged prior to first-time use.
- If the earbuds are left unused for over two weeks, please recharge.
- Please use the chargers made by qualified manufacturer.
- If earbuds fail to be found by phone, please re-turn them connectable or restore factory settings. If a program error of phone occurs, please turn off and on Bluetooth function or reboot the phone.
Caveats
- Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
- Do not store the earbuds in extreme temperatures (under 0°C or over 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to avoid dysfunction and increasing risk of electricshock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
Note: please do not use earbuds for a long time as may damage your hearing.
Notes: Please arrange using time properly as your hearing may be damaged
by using the device for a long time.
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City
Guangdong Province China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>