V I V O DESK-DR3C Black Corner Clamp on Desk Drawer Instruction Manual

: June 17, 2024
: V I V O

Table of Contents

V I V O DESK-DR3C Black Corner Clamp on Desk Drawer
Product Information
Product Usage Instructions
PACKAGE CONTENTS
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V I V O DESK-DR3C Black Corner Clamp on Desk Drawer

Product Information

Product Name: Black Corner Clamp-on Desk Drawer
SKU: DESK-DR3C

Specifications

Weight Capacity : 11lbs (5kg)
Tools Needed : Phillips Screwdriver

Product Usage Instructions

Package Contents

```
*  **A (x1)** – Short Drawer Front
```
- B (x1) – Short Drawer Left
- C (x1) – Short Drawer Right

Assembly Steps

Step 1
Slide open Drawer Slides (K), pull the lever on Internal Slides (K2), and slide out Internal Drawer Slides (K2) from External Slides (K1).

FAQ

Q: What tools are needed for assembly?
A: You will need a Phillips Screwdriver for assembly.
Q: What is the weight capacity of the desk drawer?
A: The weight capacity of the desk drawer is 11lbs (5kg).

Black Corner Clamp-on Desk Drawer
Instruction Manual

SKU : DESK-DR3C

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-dr3c

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

$V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $5$$ $V I V O-DESK-DR3C-Black- Corner-Clamp-on-Desk-Drawer-image $6$$

TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1
Slide open Drawer Slides (K), pull the lever on Internal Slides (K2), and slide out Internal Drawer Slides (K2) from External Slides (K1). $V I V O -DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $9$$
STEP 2
Install Handle (J) to Short Drawer Front (A) using M4x16mm Screws (S-A) and a Phillips screwdriver. $V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer- image $10$$
STEP 3
Attach Cam Lock Screws (S-B) to Short Drawer Front (A) using a Phillips screwdriver. $V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $11$$
STEP 4
Slide Short Drawer Left and Right (B,C) over Cam Lock Screws (S-B) on Short Drawer Front (A). Make sure the channels are towards the bottom. $V I V O -DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $12$$
STEP 5
Insert Cam Lock Nuts (S-C) into Short Drawer Left and Right (B,C) with the arrow and the opening facing towards the screw head. Using a Phillips screwdriver, turn Cam Lock Nuts (S-C) clockwise half a turn to tighten. $V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $13$$
STEP 6
Slide Drawer Bottom (D) into the channels on Short Drawer Left and Right (B,C). Install Short Drawer Back (E) onto Short Drawer Left and Right (B,C) using ST3.9x25mm Screws (S-D) and a Phillips screwdriver. $V I V O-DESK-DR3C- Black-Corner-Clamp-on-Desk-Drawer-image $14$$
STEP 7
Attach Internal Drawer Slides (K2) to Short Drawer Left and Right (B,C) using ST3.5×9.5mm Screws (S-E) and a Phillips screwdriver. Ensure the tabs on Internal Drawer Slides (K2) are facing towards the front of the drawer. $V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $15$$
STEP 8
Install Handle (J) to Tall Drawer Front (F) using M4x16mm Screws (S-A) and a Phillips screwdriver. $V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer- image $16$$
STEP 9
Attach Cam Lock Screws (S-B) to Tall Drawer Front (F) using a Phillips screwdriver. $V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $17$$
STEP 10
Slide Tall Drawer Left and Right (G,H) over Cam Lock Screws (S-B) on Tall Drawer Front (F). Make sure the channels are towards the bottom. $V I V O -DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $18$$
STEP 11
Insert Cam Lock Nuts (S-C) into Tall Drawer Left and Right (G,H) with the arrow and the opening facing towards the screw head. Using a Phillips screwdriver, turn Cam Lock Nuts (S-C) clockwise half a turn to tighten. $V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $19$$
STEP 12
Slide Drawer Bottom (D) into the channels on Tall Drawer Left and Right (G,H). Install Tall Drawer Back (I) onto Tall Drawer Left and Right (G,H) using ST3.9x25mm Screws (S-D) and a Phillips screwdriver. $V I V O-DESK-DR3C- Black-Corner-Clamp-on-Desk-Drawer-image $20$$
STEP 13
Attach Internal Drawer Slides (K2) to Tall Drawer Left and Right (G,H) using ST3.5×9.5mm Screws (S-E) and a Phillips screwdriver. Ensure the tabs on Internal Drawer Slides (K2) are facing towards the front of the drawer. H $V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $21$$
STEP 14
Attach Drawer Slides (K) to Housing Left (L) using ST3.5×9.5 Screws (S-E) and a Phillips screwdriver. Attach Cam Lock Screws (S-B) to Housing Left (L) using a Phillips screwdriver. Attach Clamping Brace (P) to Housing Left (L) using M5x25mm Screws (S-G) using 3mm Allen Wrench (T-A).
$V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $22$$ STEP 15
Attach Drawers Slides (K) to Housing Right (M) using ST3.5×9.5 Screws (S-E) and a Phillips screwdriver. Attach Cam Lock Screws (S-B) to Housing Right (M) using a Phillips screwdriver. Attach Clamping Brace (P) to Housing Right (M) using M5x25mm Screws (S-G) using 3mm Allen Wrench (T-A). $V I V O-DESK-DR3C- Black-Corner-Clamp-on-Desk-Drawer-image $23$$
STEP 16
Slide Shelf (N) over Cam Lock Screws (S-B) on Housing Left and Right (L,M). Insert Cam Lock Nuts (S-C) into Shelf (N) with the arrow and the opening facing towards the screw head. Using a Phillips screwdriver, turn Cam Lock Nuts (S-C) clockwise half a turn to tighten. $V I V O-DESK-DR3C-Black-Corner- Clamp-on-Desk-Drawer-image $24$$
STEP 17
Attach Housing Back (O) to Housing Left and Right (L,M) using ST3.9x25mm Screws (S-D) and a Phillips screwdriver. $V I V O-DESK-DR3C-Black-Corner- Clamp-on-Desk-Drawer-image $25$$
STEP 18
Slide drawers onto Drawer Slides (K). $V I V O-DESK-DR3C-Black-Corner- Clamp-on-Desk-Drawer-image $26$$
STEP 19
Depending on your desired installation location, install Clamps (Q) to Clamping Braces (P) using M5x12mm Screws (S-F) and 3mm Allen Wrench (T-A). Adjust the clamp so there is a gap slightly larger than your desktop thickness. Leave the screws tight enough to hold the clamp position, do not over tighten. $V I V O-DESK-DR3C-Black-Corner-Clamp-on-Desk-Drawer-image $27$$
STEP 20
Slide the Drawer onto the desktop and tighten Clamps (Q).

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

LAST UPDATED: 07/20/2023 REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M