QCY-HT03 True Wireless Earbuds User Guide

QCY-HT03 True Wireless Earbuds

For a better user experience, please scan to download the QCY app before starting.

Function

• Power-on: open the lid, or keep touching panels for 1.5s if earbuds are out of the case
• Power-off: Push earbuds into the case and close Lid(HALL SWITCH)
• Answer/end call: double touch panel
• Ignore the call: keep touching the panel for 1.5
• Skip track forward: triple touch right panel
• Voice assistant: triple touch left panel
• Playback/pause: double touch the left/right panel to play/pause
• Low-latency mode: keep touching the left panel for 1.5
• Mode switch: keep touching the right panel for I .5s to switch between ANC, normal, and transparency modes

Overview

Choose Eartips
Please try medium eartips first as they fit most people

The above pictures are for reference only and practical items may vary.

Warranty Card

Warranty Period
12 months after you purchase this item {or you may inquire with your local shopper for more details).

Free Service:
Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.

• Model Number
• Date of Purchasing
• User’s Name:
• User’s Phone
• User’s Address
• Shop’s Name:
• Shop’s Address
• Comments

Free exchange service will not be accessed under the following circumstances:

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by act of God, Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing

How to Connect

Open lid and pick up earbuds to power them on, On the phone, search for QCY- HT03 and tap to connect. Power on earbuds and they will auto-reconnect to the last phone in connectivity records, if any.

One Press to Turn Connectable

1. Earbuds have been connected to the phone.
2. Push earbuds into the case, open the case, and keep pressing the button on the case for 3s or until the LED blinks green 5 times. Pick up earbuds again to turn them connectable.

Factory Setting

Push earbuds into case, open lid, and keep pressing the button on the case for IOs or until LED blinks red 5 times to reset and power on earbuds

LED for Battery Level(Press the Button)

• Battery level>50%: green
• Battery level<50%: red

Use Instruction

LED on Case
LED will turn solid red when case is charging and turn solid green once it is topped up

FCC Statement

This equipment has been tested and found to comply with the imits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Hazardous substances and their contents in the item

Notes : Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Manufacturer : Dongguan Hele Electronics Co,, Ltd.
Address : No, 325 Yuehui Rd, Daojiao Town Dongguan City Guangdong Province China

Tips

1. Before using the earbuds, please read the manual carefully and keep it for future references.
2. The earbuds need to be fully charged prior to first-time use
3. If the earbuds are left unused for over two weeks, please recharge.
4. Please use the chargers made by qualified manufacturer
5. If earbuds fail to be found by phone, please re-turn them connectable or restore factory settings. If a program error of phone occurs, please turn off and on the Bluetooth function or reboot the phone.

Caveats

1. Never disassemble or modify your earbuds for any reasons to avoid any damages and danger
2. Do not store the earbuds in extreme temperatures (under 0° C or over 45° C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use the earbuds during a thunderstorm to avoid dysfunction and increasing risk of electricshock.
5. Do not use harsh chemicals or strong detergents to clean the earbuds
   Note : please do not use earbuds for a long time as may damage your hearing.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>