rapidline ORCA BL Mesh Chair Instruction Manual
- June 17, 2024
- rapidline
Table of Contents
rapidline ORCA BL Mesh Chair
Assembly Instructions
Product Code : ORCA BL
Product Name: ORCA Mesh Chair
Time Required
20 minutes
Tools Required
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included.
Skill Required
Easy Hard
The Assembly Skill Rating is a 5-point system that shows the degree of effort
needed in assembling a specific product.
With 1 being easy for the average person and 5 requiring an expert. For most
products, two persons are recommended.
NOTE
-
As this is a commercial product, some intermediate skills may be required.
-
No pre-drill holes or markings are provided on our table or desk tops.
-
Please check you have all hardware before assembling.
-
If you are missing any hardware, please contact your Rapidly reseller. Please ensure you have the name of the item, required hardware part and quantity.
-
Please retain your receipt as proof of purchase to validate your warranty.
-
Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
-
Remove all wrapping materials, including staples and packing straps before you start to assemble
-
Keep all hardware parts out of reach of children.
CAUTION -
Heavy product. Do not attempt to lift or move without help
-
Do not tighten screws and bolts until completely assembled.
-
Do not use this product unless all bolts and screws are firmly secured and tightened.
WARNING -
If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
-
Failure to follow these warnings could result in serious injury
ORCA Chair Operation Manual
