SALTER 3245501 Espresso Coffee Machine Instruction Manual
- June 17, 2024
- SALTER
Table of Contents
SALTER 3245501 Espresso Coffee Machine Instruction Manual
Please retain instructions for future reference.
Safety Instructions
When using electrical appliances, basic safety precautions should always be
followed.
Check that the voltage indicated on the rating plate corresponds with that of
the local network before connecting the appliance to the mains power supply.
Children aged from 8 years and people with reduced physical, sensory or mental
capabilities or lack of experience and knowledge can use this appliance, only
if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children should be supervised to ensure that they do not play with the
appliance.
Unless they are older than 8 and supervised, children should not perform
cleaning or user maintenance.
This appliance is not a toy.
If the power supply cord, plug or any part of the appliance is malfunctioning
or if it has been dropped or damaged, cease using the product immediately to
avoid potential injury.
This appliance contains no user serviceable parts, only a qualified
electrician should carry out repairs. Improper repairs may place the user at
risk of harm.
Keep the appliance away from other heat emitting appliances.
Do not immerse this appliance in water or any other liquid.
Do not operate the appliance with wet hands.
The coffee maker shall not be placed in a cabinet when in use.
Do not leave the appliance unattended whilst connected to the mains power
supply.
Do not use the appliance if it has been dropped, if there are visible signs of
damage or if it is leaking.
Do not use the appliance for anything other than its intended use.
Do not use any accessories other than those supplied.
Do not move the appliance when it is in use.
Do not fill the appliance above its max. fill mark. Overfilling the appliance
may cause boiling water to be ejected.
Use of an extension cord with the appliance is not recommended.
This appliance should not be operated by means of an external timer or
separate remote control system.
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
CAUTION : Hot surface – do not touch the hot section or heating
components of the appliance.
The heating element surface of this product is subject to residual heat after
use.
WARNING : Boiling water and steam can cause serious injury; exercise
extreme caution when using this appliance.
Keep the appliance away from flammable materials.
Care and Maintenance
Before attempting any cleaning or maintenance, unplug the espresso machine
from the mains power supply and allow it to cool fully.
STEP 1: Wipe the espresso machine main unit with a soft, damp cloth and
allow to dry thoroughly.
Never use harsh or abrasive cleaning detergents or scourers to clean the
espresso machine as this could cause damage.
STEP 2: Wash the filter holder, water tank, single and double cup
filters, coffee spoon/tamper, drip tray cover and drip tray in warm, soapy
water, then rinse and dry thoroughly.
NOTE : The espresso machine should be cleaned after each use.
Removing Limescale
Limescale can develop over time and may affect the performance and lifespan of
the espresso machine.
It is recommended to descale the espresso machine regularly, at least once
every three months, especially if used in a hard water area. Frequent
descaling will improve the performance and lifespan of the espresso machine.
See online instruction manual for details.
STEP 1: Fill the water tank to the max. fill mark with cold water.
STEP 2: Add a commercial descaling agent, adhering to the manufacturer’s
instructions. It is not recommended to use vinegar to descale the espresso
machine.
STEP 3: Follow the instructions outlined in the section entitled ‘Using
the Espirista’. Place a cup under the filter and, without adding coffee,
select’ ‘. Repeat the process until approx. 3 cups have been filled, then
press the steam button. Switch off the espresso machine and leave the
remaining hot water to sit for approx. 15 minutes.
STEP 4: Empty the cups. Refill the water tank to the max. fill mark with
clean water. Run the espresso machine at least twice more and pour the water
away once it has cooled. The espresso machine should now be descaled, clean,
and ready for use. If any traces of descaling product residue remain, run more
clean water through the espresso machine until it is completely clean.
Description of Parts
Instructions for Use
Before First Use
Before using the espresso machine for the first time, clean the water tank and accessories following the instructions in the section entitled ‘Care and Maintenance’.
NOTE : When using the espresso machine for the first time, a slight odour may be emitted. This is normal and will soon subside. Allow for sufficient ventilation around the espresso machine.
STEP 1: Before connecting to the mains power supply, position the
espresso machine onto a flat, stable, heat-resistant surface at a height that
is comfortable for the user. Check that all accessories are in place.
STEP 2: Remove the silicone stopper from the water tank. Fill the water
tank taking care not to exceed the max. fill mark.
STEP 3: Follow the instructions outlined in the section entitled ‘Using
the Espirista’.
Place an empty container (e.g., a milk frothing jug) under the frothing wand
and select ‘ ‘. Allow the steam function to run for approx. 30 seconds.
STEP 4: Lock the filter holder into position by turning in an
anticlockwise direction. Place a cup beneath the coffee outlet and select’ ‘.
Discard the water.
Using the Espirista
Press ‘POWER’ to turn on the espresso machine. ‘ ‘, ‘ ‘ and ‘ ‘ will start to
flash and the espresso machine will begin preheating.
Once’ ‘, ‘ ‘ and ‘ stop flashing and remain illuminated the espresso machine
is ready for use.
To turn off the espresso machine press ‘ POWER ‘ at any time.
NOTE : If ‘ ‘ flashes quickly after preheating is complete, rotate the steam control dial in a clockwise direction to close it.
Making 1 Cup of Espresso
STEP 1 : Insert the single cup filter into the filter holder. Fully align
the raised dot on the single cup filter with the filter holder slot. Rotate
the single cup filter until it is secured in place. The single cup filter
should not be loose.
STEP 2 : Using the coffee spoon, measure out approx. 9 g of ground coffee
and place into the single cup filter within the filter holder. Press the
coffee down lightly with the tamper end of the coffee spoon to compact it.
STEP 3: Lock the filter holder into position by turning in an
anticlockwise direction.
STEP 4: Place an espresso cup beneath the coffee outlet and press ‘ ‘.’ ‘
will start to flash and espresso will pour from the coffee outlet into the
espresso cup.
Once the brewing cycle is complete, ‘ ‘ will stop flashing and remain illuminated.
WARNING : Do not leave the espresso machine unattended during the coffee making process.
Making 2 Cups of Espresso
STEP 1 : Insert the double cup filter into the filter holder. Fully align
the raised dot on the double cup filter with the filter holder slot. Rotate
the double cup filter until it is secured in place. The double cup filter
should not be loose.
STEP 2: Using the coffee spoon, measure out approx. 16 g of ground coffee
and place into the double cup filter within the filter holder. Press the
coffee down lightly with the tamper end of the coffee spoon to compact it.
STEP 3: Lock the filter holder into position by turning in an
anticlockwise direction.
STEP 4: Place or large cup or two espresso cups beneath the coffee outlet
and press ‘ ‘. ‘ ‘ will start to flash and espresso will pour from the coffee
outlet into the espresso cups. Once the brewing cycle is complete, ‘ ‘ will
stop flashing and remain illuminated.
Using the Frothing Wand
STEP 1: Preheat the espresso machine following the instructions in the
section entitled ‘Using the Espirista’. Press ‘ ‘ to power up the steam
function; ‘ ‘ will start to flash. Once the required temperature is reached, ‘
‘ will stop flashing and remain illuminated.
STEP 2: While the espresso machine is preheating, fill a suitable
container (e.g., a milk frothing jug) with at least 100 ml of milk and place
under the frothing wand. Never immerse the black ring.
STEP 4: Rotate the steam control dial in an anticlockwise direction to
open it and release steam.
STEP 3: Once the milk reaches the correct temperature and froth
consistency, rotate the steam control dial in a clockwise direction to close
it.
NOTE : Clean the frothing wand immediately after use, to prevent milk scaling.
Using the Hot Water Function
If the steam control dial is opened while ‘ ‘ or ‘ ‘ is selected, hot water
will be released from the frothing wand instead of steam. To stop the flow of
hot water, rotate the steam control dial in a clockwise direction to close it.
Hints and Tips
- Always use cold, fresh water to fill the water tank.
- The quantity of ground coffee can be adapted to taste. For stronger espresso, use more ground coffee, for weaker espresso use less.
- If using regular ground coffee, more is needed per cup to achieve the same strength as finer ground coffee.
- After using packaged ground coffee, tightly reseal it and store in a cool, dry place.
- To achieve optimum coffee taste, use whole coffee beans and finely grind them before brewing.
- Do not reuse ground coffee that has already been used in the espresso machine, as this will greatly reduce the flavour of the coffee.
- Reheating coffee is not recommended as it affects the taste.
Storage
The espresso machine must be cool, clean and dry before storing in a cool, dry
place.
Never wrap the cord tightly around the espresso machine; wrap it loosely to
avoid causing damage.
Indicator Tips
Troubleshooting Tips
Specifications
Product code: EK5240
Operating voltage: 220–240 V – 50/60 Hz
Power: 1350 W
Connection To The Mains
Please check that the voltage indicated on the product corresponds with your
supply voltage.
Important
As the colours in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as
follows:
The wires in the mains lead are coloured in accordance with the following
code:
Blue Neutral (N)
Brown Live (L)
Green/Yellow Earth( )
FOR UK USE ONLY – Plug fitting details (where applicable).
The wire coloured BLUE is the NEUTRAL and must be connected to the terminal marked
N or coloured BLACK.
The wire coloured BROWN is the LIVE wire and must be connected to the terminal marked L or coloured RED.
The wire coloured GREEN/YELLOW must be connected to the terminal marked with the letter E or marked .
On no account must either the BROWN or the BLUE wire be connected to the
EARTH terminal ( ****).
Always ensure that the cord grip is fastened correctly.
The plug must be fitted with a fuse of the same rating already fitted and
conforming to BS 1362 and be ASTA approved.
If in doubt, consult a qualified electrician who will be pleased to do this
for you.
Non-Rewireable Mains Plug
If your appliance is supplied with a non-rewireable plug fitted to the mains
lead and should the fuse need replacing, you must use an ASTA approved one
(conforming to BS 1362 of the same rating).
If in doubt, consult a qualified electrician who will be pleased to do this
for you.
If you need to remove the plug, DISCONNECT IT FROM THE MAINS , then cut it
off the mains lead and immediately dispose of it safely. Never attempt to
reuse the plug or insert it into a socket outlet as there is a danger of an
electric shock.
UP Global Sourcing UK Ltd.,
UK. Manchester OL9 ODD.
Germany. 51149 Koln.
If this product does not reach you in an acceptable condition please contact our Customer Services Department at salter.com
Please have your delivery note to hand as details from it will be required.
If you wish to return this product, please return it to the retailer from where it was purchased with your receipt (subject to their terms and conditions).
Guarantee
All products purchased as new carry a manufacturer’s guarantee; the time period of the guarantee will vary dependent upon the product. Where reasonable proof of purchase can be provided, Salter will provide a standard 12 month guarantee with the retailer from the date of purchase. This is only applicable when products have been used as instructed for their intended, domestic use. Any misuse or dismantling of products will invalidate any guarantee.
Under the guarantee, we undertake to repair or replace free of any charge any parts found to be defective. In the event that we cannot provide an exact replacement, a similar product will be offered or the cost refunded. Any damages from daily wear and tear are not covered by this guarantee, nor are consumables such as plugs, fuses etc.
Please note that the above terms and conditions may be updated from time to time and we therefore recommend that you check these each time you revisit the website.
Nothing in this guarantee or in the instructions relating to this product excludes, restricts or otherwise affects your statutory rights.
Disposal of Waste Batteries and Electrical and Electronic Equipment
This symbol on the product, its batteries or its packaging means that this product and any A batteries it contains must not be disposed of with household waste. Instead, it is the user’s responsibility to hand this over to an applicable collection point for the recycling of – batteries and electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. Some retailers provide take-back services which allow the user to return exhausted equipment for appropriate disposal. It is the user’s responsibility to delete any data on electrical and electronic equipment prior to disposal. For more information about where to drop batteries, electrical and electronic waste off, please contact the local city/municipality office, household waste disposal service, or the retailer.
*To be eligible for the extended guarantee, go to guarantee.upgs.com/salter/ and register your product within 30 days of purchase.
Find us on
www.facebook.com/SalterUK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>