SALTER PT-1715 Bike Stationary bicycle User Manual

SALTER PT-1715 Bike Stationary bicycle

Product Information

• Specifications
  • The PT-1715 Bike is designed for home usage and is suitable for individuals weighing up to 130 kg.
  • It comes with multiple parts for assembly, as listed in the parts list.
• Safety Instructions
  • Read all warnings posted on the equipment.
  • Read and follow the Owner’s Manual carefully before using the equipment.
  • Assemble the product with the help of two people.
  • Keep children and pets away from the equipment.
  • Ensure correct assembly before use.
  • Place the equipment in a dry area away from humid or corrosive environments.
  • Operate the equipment on a solid, level surface.
  • Inspect for worn or loose components before each use.
  • Avoid wearing loose clothing while using the equipment.
  • Do not exercise barefoot; wear appropriate footwear.
  • Maintain balance while using the equipment to prevent falls.
  • Keep both feet securely on the foot pedals while exercising.
  • Ensure adequate space around the equipment for access and movement.
  • Perform maintenance as indicated in the manual.
• Assembly Instructions
  • Step 1: Begin assembling by following the instructions provided in the manual.
  • Step 2: Continue with the assembly process as detailed in the manual.
  • Step 3: Complete the assembly of the PT-1715 Bike according to the provided instructions.

Frequently Asked Questions

• Q: Where can I download the owner’s manual for the PT-1715 Bike?
  • A: The owner’s manual can be downloaded from the customer area on www.salter.es.

SAFETY INSTRUCTIONS

1. Read all warnings posted on the equipment.
2. Read this Owner’s Manual and follow it carefully before using the equipment.
3. We recommend that two people be available for assembly of this product.
4. Keep children and pets away from the equipment. Do not allow children and pets to use or play on the equipment.
5. Make sure it is correctly assembled before start using it.
6. Place the equipment in a dry area away from humid, saline or corrosive environments.
7. Set + and operate the equipment on a solid-level surface. Do not position the equipment on loose rugs or uneven surfaces.
8. Inspect the equipment for worn or loose components before each use.
9. Replace any loose or worn components before using the equipment and/or keep the equipment out of service until it has been completely repaired.
10. Do not wear loose or dangling clothing while using the equipment.
11. Never exercise in bare feet or socks; always wear correct footwear, such as running, walking, or cross-training shoes.
12. Be careful to maintain your balance while using, mounting, dismounting, or assembling the equipment loss of balance may result in a fall and serious bodily injury.
13. Keep both feet firmly and securely on the foot pedals or the band (in the case of treadmills) while exercising.
14. The equipment should not be used by persons weighing over 130 kg.
15. The equipment should be used by only one person at a time.
16. The equipment is for home use.
17. Make sure that adequate space is available for access to and passage around the equipment; keep at least a distance of 1 meter from any obstructing object while using the machine.
18. Do the maintenance of the equipment indicated in this manual.

ATTENTION: Before starting any exercise or conditioning program you should consult with your physician to see if you require a complete physical exam. If, at any time during exercise, you feel faint, dizzy, or experiencing pain, stop and consult your physician. Follow your physician’s recommendations in developing your fitness program. Always choose the workout that best fits your physical strength and flexibility level. Know your limits and train within them. Always use common sense when exercising.

EXPLODED DRAW

PARTS LIST

TOOLS

ASSEMBLY INSTRUCTION

USE INSTRUCTIONS

Key functions START/STOP (ST/SP):

1. Start and Pause workouts.
2. Start body fat measurement and quit the body fat program.
3. Operates only when in stop mode. Holding the key for 3 seconds will reset all function values to zero.
   • -: Decrease the value of selected workout parameters: TIME, DISTANCE, etc. During the workout, it will decrease the resistance load.
   • +: Increases value of selected workout parameter. During the workout, it will increase the resistance load.
   • MODE:
   • To input desired value or workout mode.
   • Press to switch the display from RPM to SPEED, ODO to DIST, and WATT to Calories during a workout.
   • TEST (RECOVERY): When you have finished your workout, press TEST. For RECOVERY to function correctly, it needs your Heart Rate input. Place both hands on the pulse sensors. TIME will count – from 1 minute and then your fitness level from F1 to F6 will be displayed.

Workout Selection:

Program selection: After powering on, press the +/- keys to select the desired program. Press MODE to confirm. Once a program has been selected, the “Time” parameter will flash. Use + or – to select the desired time value. Press the MODE key to input value. The flashing prompt will move to the next parameter. Continue using the +/- key. Press START/STOP to start the workout.

1. Manual (P1)
   • Select “Manual” using the + or – key; then press the MODE key. “Time” will flash so the value can be adjusted using the + or – key. Press the MODE key to save value & move to the next parameter to be adjusted.
   • Continue through all desired parameters. Press START/STOP to start the workout.
   • Note: When one of the workout parameters counts down to zero, it will have bi-sounds and stop the workout automatically. Press the START KEY to continue the workout to reach the unfinished workout parameters.
2. Pre-Programs (P2-P7)
   • There are 6 program profiles ready for use. All program profiles have 16 levels of resistance.
   • Setting Parameters for Pre-programs:
   • Select one of the pre-programs using the + or – key; then press the MODE key. “Time” will flash so the value can be adjusted using the + or – key. Press the MODE key to save value & move to the next parameter to be adjusted.
   • Continue through all desired parameters.
   • Press START/STOP to start the workout.
   • Note: When one of the workout parameters counts down to zero, it will have bi-sounds and stop the workout automatically. Press the START KEY to continue the workout to reach the unfinished workout parameters.
3. BODY FAT program (P8)
   • Select “Body Fat Program” using the + or – key; then press the MODE key.
   • “Male” will flash so Gender can be adjusted using the + or – key, press the MODE key to save gender & move to the next data.
   • “175” of Height will flash so Height can be adjusted to use the + or – key, press the MODE key to save value & move to the next data.
   • “75” of Weight will flash so Weight can be adjusted to use the + or – key, press the MODE key to save value & move to the next data.
   • “30” of age will flash so Age can be adjusted using the + or – key, press the MODE key to save value.
   • Press START/STOP to start the measurement, please also grasp hand pulse grips.
   • After 15 seconds the display will show out Body Fat%, BMR, BMI & BODY TYPE.
   • Press START/STOP KEY to return the main Display.
4. TARGET HEART RATE Program (P9)
   • Select “TARGET H.R.” using the + or – key; then press the MODE key. “Time” will flash so the value can be adjusted using the + or – key. Press the MODE key to save value & move to the next parameter to be adjusted. Continue through all desired parameters, pressing
   • START/STOP to start the workout.
   • Note: If the Pulse is above or below (±5) the set TARGET H.R., the computer will adjust the resistance load automatically. It will check every 20 seconds approx. Note: Each resistance load represents 2 levels of loading).
   • Note: When one of the workout parameters counts down to zero, it will have bi-sounds and stop the workout automatically. Press START/STOP to continue the workout to reach the unfinished workout parameters.
   • Note: When one of the workout parameters counts down to zero, it will have bi-sounds and stop the workout automatically. Press the START KEY to continue the workout to reach the unfinished workout parameters.
5. HEART RATE CONTROL Program (P10-P12)
   • There are 3 selections for the target pulse:
   • P10-60% BEGINNER (goal: weight control)= 60% of (220-AGE)
   • P11-75% INTERMEDIATE (goal: cardio training)= 75% of (220-AGE)
   • P12-85% ADVANCED (goal: anaerobic or maximum load training)= 85% of (220-AGE)
   • Select “One of Heart Rate Control Program” using the + or – key; then press the MODE key. “Time” will flash so the value can be adjusted using the + or – key. Press the MODE key to save value & move to the next parameter to be adjusted.
   • Continue through all desired parameters.
   • Press START/STOP to start the workout.
   • Note: If the Pulse is above or below (±5) the set TARGET H.R., the computer will adjust the resistance load automatically. It will check every 20 seconds approx. (Note: each resistance load represents 2 levels of loading).
   • Note: When one of the workout parameters counts down to zero, it will have bi-sounds and stop the workout automatically. Press the START/STOP KEY to continue the workout to reach the unfinished workout parameters.
   • For example: if your age is 30, and you want to control your weight, you should work at 60% of your max. heart rate; that is 114.
   • To determine your HEART RATE ZONE, the minimum number in your zone is 109 (114 – 5) and your maximum number in your zone is 119 (114 5), so your TARGET HEART RATE ZONE in this example is 109 to 119.
   • The program will monitor your pulse and adjust the torque/resistance level automatically to keep your pulse within the HEART RATE ZONE (109 – 119) during a workout.
6. User Program (P13)
   • User program allows the user to set up its program that can be used immediately.
   • Select “USER” by using the + or – key; then press the MODE key. “Time” will flash so the value can be adjusted using the + or – key. Press the MODE key to save value & move to the next parameter to be adjusted.
   • Continue through all desired parameters.
   • After setting up the desired parameters, level 1 will flash; use the +/- key to adjust the resistance level for each segment. Then press ENTER until finished. (There are a total of 10 times). Press START/STOP to start the workout.
   • Note: When one of the workout parameters counts down to zero, it will have bi-sounds and stop the workout automatically. Press the START/STOP KEY to continue the workout to reach the unfinished workout parameters.

CONNECTIVITY WITH APPLICATIONS

KINOMAP: Search, download and install Kinomap over the App Store.

1. Enter Kinomap to select [More] page;
2. Select to add more fitness equipment;
3. Select the desired device type;
4. Tap FiteShow entrance;
5. Tap the matching devices like ‘Fs-XXXX’ to bind Find related videos to start sports.
6. Find related videos to start sports.

SWIFT

Search, download, and install ZWIFT over the App Store.

• Enter ZWIFT to register an account;
• Login account to select the paired riding equipment;
• Pair the device successfully, tap OK to start sport;
• For riding equipment, start riding directly.

HOW TO USE

HOW TO USE YOUR WIRELESS HEART RATE CHEST BAND (NOT INCLUDED OPTIONAL)

Use the Wireless Chest Band to transmit your heart rate directly to the Dashboard. As soon as the Transmitter senses activity from your heart, it will be activated.

• Step 1: Adjust the band to fit as tight as comfortable, around your chest, just below your pectoral muscles. Adjust the band so that it is positioned securely and will not fall or move during your workout.
• Step 2: Position the Transmitter (the middle section of the band) with the flat side against your body, and the logo and rounded, silver surface facing outward away from your body (centered).
• Step 3: Begin your workout and check for a pulse reading on the Dashboard. The heart-shaped Icon will flash when it senses your heart pulse.
• NOTE: Perspiration will help to conduct your heart rate pulses to the Transmitter. If the Transmitter is not sending a signal, or it seems erratic, consider adding some water to the back side of the Transmitter, or wait for your own perspiration to help improve the signal. It is always recommended to use your wireless chest band when using heart pulse workout programs.

MAINTENANCE

• Dry and clean those areas exposed to perspiration.
• It is recommended to use towels to avoid sweat falling on the equipment.
• Dust and dirt may be the cause of functioning problems in the gears and the internal bearings.
• It is recommended to keep the equipment casing and its different elements clean.

ENVIRONMENTAL NOTE

• The symbol with which is marked this unit (waste bin with wheels) indicates that it cannot be thrown for any reason into domestic waste.
• When disposing of the product should be taken to a proper recycling point.
• If properly disposed of the product may be reused and recycled, and it will help to conserve natural resources, preserve the environment and significantly reduce the potential negative impact on our environment.
• For more information about the return system, collection and recycling of these products contact your City Council or the retailer.

WARRANTY CONDITIONS

• Consult the warranty of this equipment on www.salter.es.
• It is essential to indicate the serial number of the equipment for repairs under warranty.
• This manual can be downloaded from the customer area on www.salter.es.

References

• Salter
• Salter

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>