V I V O CHAIR-CL02B Ergonomic Cross Legged Chair with Wheels Instruction Manual

: June 17, 2024
: V I V O

Table of Contents

V I V O CHAIR-CL02B Ergonomic Cross-Legged Chair with Wheels
PACKAGE CONTENTS
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V I V O CHAIR-CL02B Ergonomic Cross-Legged Chair with Wheels

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

$V I V O-CHAIR-CL02B-Ergonomic-Cross-Legged-Chair-with-Wheels-FIG- $1$$

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1
Connect Casters (J) to the underside of Base (A).

$V I V O-CHAIR-CL02B-Ergonomic-Cross-Legged-Chair-with-Wheels-FIG- $2$V I V O-CHAIR-CL02B-Ergonomic-Cross-Legged-Chair-with-Wheels-FIG- $2$$

STEP 2
Connect Casters (J) to the underside of Base (A). Place Gas Spring (B) into Base (A) as shown below. Use a 5mm Allen Wrench (T-A) to remove Collar (B1).

$V I V O-CHAIR-CL02B-Ergonomic-Cross-Legged-Chair-with-Wheels-FIG- $4$$

STEP 3
Place Lower Support (C) onto Gas Spring (B) and secure using M8x22mm Screws (S-C) and 5mm Allen Wrench (T-A). Slide Collar (B1) onto Gas Spring (B) and set at the desired height using a 5mm Allen Wrench (T-A). The placement of the collar will set the lowest height setting for the seat and is used to prevent collision with the foot pad and adjustment handles.

$V I V O-CHAIR-CL02B-Ergonomic-Cross-Legged-Chair-with-Wheels-FIG- $5$$

STEP 4
Secure Foot Pad (H) to Lower Support (C) using M6x20mm Screws (S-A) and 5mm Allen Wrench (T-A).

STEP 5
Place Seat Pad (G) onto Gas Spring (B) with the curved side facing Foot Pad (H).

STEP 6
Slide Back Rest Support (E) into the bracket on the underside of the Seat Pad (G) and secure using M8x30mm Screws (S-D) and 5mm Allen Wrench (T-A).

$V I V O-CHAIR-CL02B-Ergonomic-Cross-Legged-Chair-with-Wheels-FIG- $8$$

STEP 7
Attach the Back Rest Bracket (I) to Back Rest Pad (F) using M6x16mm Screws (S-B) and 5mm Allen Wrench (T-A). Choose your preferred height on Back Rest Support (E) and secure the assembled backrest using Adjustment Screw (D).

$V I V O-CHAIR-CL02B-Ergonomic-Cross-Legged-Chair-with-Wheels-FIG- $9$$

STEP 8
Adjust the height of the seat by pressing the button below the Seat Pad (G).

$V I V O-CHAIR-CL02B-Ergonomic-Cross-Legged-Chair-with-Wheels-FIG- $10$$

Open Monday – Friday 7:00 am – 7:00 pm CST
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5

AVG. RESPONSE TIME (within office hrs): 1HR 8M