nedis AT-N05V3V3-F 3G1.5 Electric Vehicle Portable Charger User Guide

: June 17, 2024
: nedis

Table of Contents

Specifications8
Portable EV Type 2 charging cable
Intended use
Safety instructions
Operation notes
Documents / Resources

Portable EV Type 2 charging cable
3.7 kW charging box cable
**EVCH37KWBK20
nedis AT-N05V3V3-F 3G1.5 Electric Vehicle Portable
Charger Quick start guide

ned.is/evch37kwbk20
**

Specifications8

Article number	EVCH37KWBK20
Electric vehicle charging equipment properties	IC-CPD Mode 2 Charging

equipment
Cable type| Straight TPU cable
cable length| 5 m From the AC power plug to the end of the charging plug.
Charging cable diameter| 3G 2.5mm2 + 0.5mm2
Charging plug standard| EN 62196-2 Type 2
Standard control box| EN 62752:2016+A1
Display| LCD display
AC input| Schuko plug with protective ground
Maximum rated voltage| 250V
Maximum rated power| 3.7 kW
Adjustable rated current| 6A/8A/10A/13A/16A
Number of phases| 1-phase
Protection| Over-voltage protection Under-voltage protection Over-current protection Over-temperature protection
Residual current protection| Type-A+DC 6mA
EN standards| EN IEC 62851-21-2:2021 EN IEC 61000-6-1:2019 EN IEC 61000-6-3:2021 EN 62196-1
EN 62196-2
EN 50620
operating temperature| -25°C – +50°C
standard flammability| UL94 V-0
IP protection rating| IP55
Insertion life cycles| > 1000 teams

nedis AT-N05V3V3-F 3G1.5 Electric Vehicle Portable Charger - Article
number nedis
AT-N05V3V3-F 3G1.5 Electric Vehicle Portable Charger -
fig1

Portable EV Type 2 charging cable

EVCH37KWBK20
For more information see the extended manual online: ned.is/evch37kwbk20

Intended use

This product is a portable EV charging cable with 5 charging current choices and a timer option.
This product is intended to charge your electric vehicles with an AC230V socket from your home in the EU region.
This product is intended for outdoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.
The product is not intended for professional use.
This product is not intended to be used in combination with a smart plug or smart wall socket.
This product is not intended to be used in combination with adapters or extension cables.

Main parts (image A)

1 power plug	7 Green LED 2
2 Control boxes	8 Green LED 1
3 Display screen	9 Red LED
4 Charging current button	10 EV charging plug
5 Delay timer button	11 Dust cover
6 Green LED 3	12 Storage bags

Display screen (image B)

1 Device rated current	7 Charging progress bar
2 Amount of power charged	8 Internal temperature
3 Charging voltage	9 Charging power
4 Charging time	10 Selected delay time
5 Status	11 Charging current (6A/8A/10A/13A/16A)
6 Charging status indicator

Safety instructions

icon	Description
Read and understand the user manual and all other safety instructions

before using this product.
| Indication to warn for electric shock.
| The surfaces of the product get hot during use.
| Always keep the product away from usual walkways.
| Handle the product with care.
| Do not use power strips or adapters.
| Do not use an extension cable.
| Do not twist or kink the power cable. This can damage the cable.
| Do not expose the product to direct sunlight, naked flames or heat.
| Do not immerse the product in water or other liquids.
| Do not expose the product to snow or ice.
| Do not use the product with a coiled cable.
| Do not drive over the plug, control box and cables with a vehicle.
| Do not use the product if it is damaged.
| Do not carry out repairs on the product and do not open it.
| Do not unplug the power plug during the charging process.
| Only use the product within the approved temperature range of -25 °C – 50 °C.

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Carefully read the manual of your electric vehicle. Check the instructions for the home installation.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not cover the product when in use.
Do not open the product, there are no user serviceable parts inside.
Make sure the product is undamaged and in proper condition.
Do not use this product if the power outlet is damaged, rusted, cracked, or loosely connected.
Wipe the plug with a clean and dry cloth to make sure it is dry and free of dirt. Do not use if either plug is dirty or wet.
Select the appropriate charging current according to the manual of your electric vehicle.
Do not change the charging current during the charging process.
This device is equipped with ground monitoring, do not work in power grids without protective conductor.
Do not touch the charger end terminals with sharp metallic objects.
Do not forcefully pull the charge cable or damage it with sharp objects.
Do not insert foreign objects into any part of the charging vehicle connector.
Do not install or use the charger near flammable, explosive, harsh, or combustible materials, chemicals, or vapours.
Do not operate the charger in temperatures outside its operating range of -25°C to 50°C.
Do not use the charger when either you, the vehicle, or the charger is exposed to severe rain, snow electrical storm or other severe weather.
Do not use the charger if it is defective, appears cracked, frayed, broken or otherwise damaged, or foils to operate.
Do not use this product if the EV cable is frayed, has damaged insulation, or any other sign of damage.
Do not use this product if the outer shell or the EV connector is broken, cracked, open, or shows any other indication of damage.
Do not attempt to open, disassemble, repair, tamper with, or modify the charger. Please contact us for any maintenance matters.
Make sure that the charger is free from any abnormal conditions, such as laceration, rust, rupture breakage of charging ports, cables, control boxes, wires, and plug surfaces.
Make sure that the plug at the power supply end is consistent with the power supply socket before charging.
Do not expose the product to a direct jet of water or splash water• Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Operation notes

This product has different limitations in different countries. Read the following notes before operating the product. This product is a Mode 2 charger.
According to IEC 61851-1 Electric vehicle conductive charging system – Part 1: General requirements. 6.2.2 Mode 2.

In Italy, Mode 2 is not allowed in public areas. It is recommended to use Mode 2 connections for more than 10 A.
In Switzerland, Mode 2 shall not exceed 16 A and not exceed 250 V AC in single phase systems. It is recommended to use Mode 2 connections for more than 8 A (2 kVA).
In Denmark, for EV supply equipment equipped with a plug for household and similar use, repeated continuous loads of long duration, shall be limited to 6 A.
In France, EV supply equipment equipped with a plug for household and similar use, if the charging cycle can exceed 2 hours, the maximum rated current is 8 A.
In Norway, EV supply equipment equipped with a plug for household and similar use, if the charging cycle can exceed 2 hours, the maximum rated current is 10 A. According to IEC 62752 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD). 1 Scope.
In Denmark, for IC-CPDs supplied with a plug for household and similar use the maximum charging current is 8 A if the charging cycle can exceed 2 hours.
In Finland, for IC-CPDs supplied with a plug for household and similar use the maximum charging current is 8 A for long lasting charging.

Start charging

Make sure the product is undamaged and in proper condition.
Do not use this product if the power outlet is damaged, rusted, cracked, or loosely connected.
****Wipe the plug with a clean and dry cloth to make sure it is dry and free of dirt. Do not use if either plug is dirty or wet.

Plug the power plug A1 into a compatible power outlet.
****Select the appropriate charging current according to the manual of your electric vehicle.
Press the charging current button A4 to select the desired maximum charging current.
4Press the delay timer button A5 to select the desired number of hours, between 1 and 12, to delay the start of the charging cycle.
Plug the EV charging plug Aq into the charging port of your electric vehicle.
****Do not change the charging current during the charging process.
The vehicle begins to charge.

Ending the charging process

Unlock your vehicle.
Unplug the EV charging plug Aq from your vehicle charging port.
Unplug the power plug A1 from the power outlet.
Use the dust cover Aw to protect the charging plug.
Store the product inside the storage bag Ae.

LED indicators and charging status

Status B5| Green
LED 1
A8| Green
LED 2
A7| Green
LED 3
A6| Status
---|---|---|---|---
Ready| On| Off| Off| Ready for
charging
Charging| The LEDs blink consecutively| Charging in
progress
Connect| On| Blinking| Off| Charging
finished

Disposal

The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible for the waste management.

Declaration of Conformity
We, Nedis BV declare as manufacturer that the product EVCH37KWBK20 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/EVCH37KWBK20#support

Nedis BV
De Tweeling 28, 5215 MC ‘s-Hertogenbosch – The Netherlands
service@nedis.com

Documents / Resources

| nedis AT-N05V3V3-F 3G1.5 Electric Vehicle Portable Charger [pdf] User Guide
AT-N05V3V3-F 3G1.5, EVCH37KWBK20, AT-N05V3V3-F 3G1.5 Electric Vehicle Portable Charger, Electric Vehicle Portable Charger, Vehicle Portable Charger, Portable Charger, Charger
---|---