nedis SPPT2450BK Bluetooth Cube Party Speaker User Guide

June 17, 2024
nedis

nedis SPPT2450BK Bluetooth Cube Party Speaker

nedis SPPT2450BK Bluetooth Cube Party Speaker

Specifications

Product Bluetooth® Cube Party Speaker
Article number SPPT2450BK
Max. play time (at 50 % volume) 5 hours
Charging time 2.5 hours
Bluetooth® version 5.0
Bluetooth® frequency range 2402 – 2480 MHz
Max. transmit power 6.14 dBm
Speaker peak power 150 W
Speaker RMS power 50 W
Driver diameter 5.25″ subwoofer

2 × 2″ tweeter
Impedance| 40 Ohm
RGB LED lights| Yes
Connections| USB-A
AUX
Bluetooth®
Battery capacity| 2000 mAh
Input power| 100 – 240 VAC ~ 50 / 60 Hz
| 0.8 A

Bluetooth® Cube Party Speaker

For more information see the extended manual online: ned.is/sppt2450bk

Intended use

  • This product is intended to stream audio from your media device via
  • Bluetooth®, audio cable or from a USB flash drive.
  • This product is intended for indoor use only.
  • Any modification of the product may have consequences for safety, warranty and proper functioning.
  • This product is intended to be used in household and similar applications such as kitchen areas.
  • The product is not intended for professional use.

Main parts (image A)

  1. Power supply port
  2. Reset button
  3. Bass adjustment button
  4. Treble adjustment button
  5. Handle
  6. Play/pause button / volume dial
  7. MEGA BASS button
  8. LED / previous button
  9. Battery indicator LEDs
  10. Speaker
  11. Party lights
  12. AUX port
  13. Microphone port
  14. USB port
  15. Echo adjustment button
  16. Power button
  17. Bluetooth / next button
  18. Power cable
    Main parts

Safety instructions

WARNING

  • Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
  • Only use the product as described in this document.
  • Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
  • The handle is exclusively intended to carry the weight of the product.
  • Do not drop the product and avoid bumping.
  • Do not expose the product to water, rain, moisture, or high humidity.
  • Only use the provided power cable.
  • Always keep the power cable and the product away from usual walkways.
  • Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
  • Extended exposure to high volumes can cause hearing loss.
  • Do not open the product, there are no user serviceable parts inside.
  • Do not immerse the product in water or other liquids.
  • Disconnect the product from the power source before cleaning.
  • Do not use aggressive chemical cleaning agents when cleaning the product.

Connecting the product (image B)

Connecting the product

Switching on the product (image C)

Switching on the product

Controlling the music (image D)

  1. Press the MEGA BASS button A7 to switch the mega bass function on or off.
  2. Press the bass adjustment button A3 to adjust the bass level.
  3. Press the treble adjustment button A4 to adjust the treble level.
  4. Press the echo adjustment button A15 to adjust the echo level.
    Controlling the music

Controlling the LED lights (image E)

Controlling the LED lights

Playing music from a Bluetooth® audio source (image F – G)

Playing music from a Bluetooth® audio source
Playing music from a Bluetooth® audio source

Connecting to another speaker

  1. Enable Bluetooth on both speakers.
  2. Press and hold the play/pause button / volume dial A6 on one of the speakers.

The speakers are now connected and can be controlled via one speaker.

Resetting the product

Press and hold the reset button A2 with a pin for 5 seconds to reset the product.

Disposal

The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste. For more information, contact the retailer or the local authority responsible for the waste management.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product SPPT2450BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety data sheet if applicable) can be found and downloaded via: nedis.com/SPPT2450BK#support

Customer Support

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch The Netherlands

ned.is/sppt2450bk

QR Code

Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals