savio TWS-03 Bluetooth Earphones User Manual
- June 17, 2024
- Savio
Table of Contents
**savio TWS-03 Bluetooth Earphones User Manual
**
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made
the purchase. If you want to show our device on SAVIO Facebook Page, we will
be very pleased.
If there is something that we could improve on our products, please write to
us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of purchased device it is recommended to read the whole manual.
Product scheme:
- Primary button: turn on / off, pause / play of the track
- Microphone
- Volume up / next track choice
- Volume down / previous track choice
- LED diode mode indicator
- Charging connector
Earphones charging
- Connect the charging cable to the charging socket in the earphones (red indicator diode will start to backlit in red colour, indicating that the earphones are being charged).
- When the earphones are fully charged, the notification diodes will turn off.
- Earphones are ready to use.
Earphones Pairing
SAVIO TWS-03 Earphones can be used together or apart. By default, earphones are connected with each other.
- Pairing two earphones with the transmitting device
- Press and hold the primary button located on each of the earphones. You will hear “Power on”. After a proper connection of the earphones with each other, you will hear “Connected”.
- Turn on the Bluetooth mode in the transmitting device (i.e. smartphone), then turn on the device search and choose SAVIO TWS-03 from the list. If the earphones have been already paired with a given device, they will be connected automatically.
- After proper connection of the earphones with a transmitting device, you will hear ”Connected”, LED diode on the earphones will start to blink in blue colour, in a 5 seconds intervals.
Paring one earphone with a transmitting device
- Press and hold the primary button located on one of the earphones. You will hear “Power on”. After a proper connection of the earphones with each other, you will hear “Connected”.
- Turn on the Bluetooth in the transmitting device (i.e. smartphone), then turn on the device search and choose SAVIO TWS03 from the list. If the earphones have been already paired with a given device, they will be connected automatically.
- After proper connection of the earphone with a transmitting device, you will hear “Connected”, the LED diode in the earphone will start to blink in blue colour, in 5 seconds intervals.
Buttons description:
Primary button
- Click and hold: Turn the earphones on / off
- Click once while incoming call: picks up the call
- Click and hold while incoming call: rejects the call / hangs up
- Click once while playback: pause/play
- Fast double click: dialling the last called number
Button
- Click and hold: volume up
- Single click: chooses the next track from the list
Button
- Click and hold: volume down
- Single click: chooses the previous track from the list
Package content:
- Wireless Bluetooth earphones Savio TWS-03
- Charging cable
- pairs of earbuds
- User manual
Technical specification:
- Bluetooth Version: 5.0 + EDR
- Range: up to 10 meters
- Earphones work time on a single charging cycle: up to 5 h
- Charging time: up to 1.5 h
- Stand by time: up to 100 h
- Impedance: 32 Ω
- Frequency response: 20 Hz – 20 kHz
- Frequency bands in which the radio equipment operates: 2400 – 2483.5 MHz
- Maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates: 4 dBm
- Sensitivity: -38 db
- Build-in microphone: Yes
- Earphones weight: 18.8 g
Addition information:
- Blinking red diode on one of the earphones and sound signal informs about the low battery level.
- In case when the primary button placed on earphones will not respond and LED diode will not be backlit, it means that earphones are depleted and needs to be charged.
- When earphones are connected with each other, clicking and holding the primary button on one of them will turn off both earphones.
Safety conditions:
- Use this device as intended.
- Incorrect use of the device may damage the device.
- For charging the power bank it is highly recommended to use 1 A charger, or charge it from a USB port in the computer
- Independent repairs and modification results in automatic loss of the warranty.
- Hitting or dropping the device could cause damage of the device.
- The device should be used in dry area, the device should be protected from water and high humidity.
Warranty:
The warranty covers a period of 24 months. Independent repairs and
modifications result in automatic loss of the warranty. Warranty card is
available for
download on our website:
www.savio.net.pl/en/service
Information for customers and contractors and communication regarding
complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection
Regulation (EU) 2016/679 of the European Parliament and of the Council of 27
April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp.
z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the
Administrator of your per- sonal data. The Specialist for General Data
Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul.
Morgowa 81; 35-323 Rzeszów, via e-mail address:
sodo@elmak.pl, and by phone at +48 (17) 854 98 14.
Your personal data
will be processed in order to perform the contract, in accordance with Article
6(1) (b) of the aforementioned regulation, to the extent resulting from tax
laws and financial regulations. Recipients of your personal data include
entities authorized by legal regulations to obtain personal data as well as
processing entities providing services to Elmak Sp. z o.o. Your personal data
will be stored on the basis of Administrator’s legitimate interest. You have
the right to access your data, and the right to rectify, delete or limit
processing of your data. You have the right to lodge a complaint to the
supervisory body if you believe that the processing violates the GDPR. The
provision of personal data is voluntary, however, a failure to provide such
data may result in a refusal to conclude or in termination of a contract. Your
personal data will not be subjected to automated decision making, including
profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27,
2016.
Information of the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be dis carded with
other household waste. Used equipment should be handed over to a local
collection point for this type of waste or to a recycling center. Please
contact your local authorities for information about disposal methods
available in your area. Waste electrical equipment may contain hazardous
substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get
into air, soil and groundwater when leaking from used appliances.
Environmental pollution with these substances leads to their bioaccumulation,
causing lesion of disease in living organisms, which would pose a risk to
human and animal health or life. Households may contribute to environmental
protecion by proper waste collection. In such way, hazardous substances from
the equipment are neutralized and valuable secondary raw materials are reused
for production of new equipment.
www.savio.net.pl/en/download
PRODUCER:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszow
www.savio.net.pl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>