FL-03 Savio Workshop Lamp Instruction Manual

: June 1, 2024
: Savio

Table of Contents

FL-03 Savio Workshop Lamp
Package content:
Product diagram:
Instructions for use:
Operation modes:
Technical specification:
Safety conditions:
Warranty:
Documents / Resources

Workshop lamp
model: FL-03
User manual

FL-03 Savio Workshop Lamp

Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other people on the portal ceneo.pl , social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.
If there is something that we could improve on our products, please write to us at [email protected]
Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of purchased device it is recommended to read the whole manual.

Package content:

SAVIO FL-03 Workshop lamp
USB-A – USB-C cable 0.3 m
User manual

Product diagram:

① SMD diode
② COB LED
③ Rotatable bar
④ Power button (on/off)
⑤ Charging USB-C socket
⑥ Magnetic base

Instructions for use:

3.1 Press the power button to turn on the LED COB at 100% luminous power.
3.2 Press the power button for the second time to switch LED COB to 10% luminous power mode.
3.3 Press the power button for the third time to turn on the SMD LED at 100% luminous power.
3.4 Press the power button for the fourth time to turn off the device.
3.5 Place the base of the workshop lamp on any metal surface to use the built- in magnet. This will allow you to use both hands to work and provide constant illumination of the work surface.
3.6 Rotatable bar moves within 270° range.

Operation modes:

Operation modes	Luminous flux	Operating time
COB LED 100%	150 lm	2 h
COB LED 10%	15 lm	8 h
SMD LED 100%	20 lm	8 h

Technical specification:

Power supply: Li-ion battery 1200 mAh
Power: COB 3 W + SMD 1 W
Luminous flux: 150 / 15 / 20 lm
Color temperature: 7500 K
Color rendering index (CRI): 75
Operation modes: COB LED 100% / COB LED 10% / SMD 100%
Operating time: 2 – 8 h*
Charging time: 3 h
Charging port: USB-C
Cable length: 0.3 m
Size: 148 × 54 × 35 mm
Weight: 126 g
The working time depends on the selected operation mode.

Safety conditions:

Use the product in accordance with its intended use, as improper use may damage the product.
Do not expose the device to moisture, heat or sunlight, do not use the product in a dusty environment.
The device should be cleaned only with a dry cloth.
Independent repairs and modification result automatic loss of the warranty.
Hitting or dropping may damage the product.

Warranty:

The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty.
Warranty card is available for download on our website: www.savio.net.pl/en/service
Information of the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center.
Please contact your local authorities for information about disposal methods available in your area.
Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances.
Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life.
Households may contribute to environmental protecion by proper waste collection.
In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.

Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: [email protected] , and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.

PRODUCER:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszow
www.savio.net.pl