savio COS-02 Cooling Stand User Manual

: June 1, 2024
: Savio

Table of Contents

savio COS-02 Cooling Stand
Specifications
Product Usage Instructions
Package content
Technical specification
Product scheme
Installation instructions
Warranty
Frequently Asked Questions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

savio COS-02 Cooling Stand

savio-COS-02-Cooling-Stand-product

Specifications

Model: COS-02
Warranty: 24 months
Producer: Elmak Sp. z o.o.
Website: www.savio.net.pl

Product Usage Instructions

Installation

Place the stand on a flat surface.
Set your preferred stand angle.
Set the laptop holder to the open position.
Place the laptop on the stand.
To obtain power for the stand, use the included USB-Acable.

Warranty Information

The warranty covers 24 months. Independent repairs and modifications result in automatic loss of the warranty.
The warranty card is available for download on our website: www.savio.net.pl/en/service

Contact Information

Producer: Elmak Sp. z o.o.
Address: ul. Morgowa 81, 35-323 Rzeszow
Website: www.savio.net.pl

Thank you for choosing Savio products!

If our product meets your expectations, share your opinion with other people on the portal center.pl, social media, or on the website of the store where you made the purchase. If you want to show our device on the SAVIO Facebook Page, we will be very pleased.
If there is something that we could improve on our products, please write to us at support@savio.net.pl

Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of the purchased device it is recommended to read the whole manual.

Package content

Cooling stand
USB-A – USB-A cable
User manual

Technical specification

Types of outputs/inputs: 2 × USB 2.0
Number of fans: 2
Fan size : 140 × 140 × 15 mm
Rotation speed: 1000 ± 10% RPM
Maximum air flow: 115 CFM
Maximum noise level: 25 dBA
Fan LED illumination: Yes (red)
Adjustable tilt angle: 6 degrees (0-60°)
Laptop compatibility: up to 17.3 inches
Dimensions: 357 × 260 × 32 mm
Weight: 850 g

Product scheme

savio-COS-02-Cooling-Stand-fig-1

Output / Input: 2 × USB 2.0
Laptop holder
Adjusting the angle of tilt
Cooling fans

Installation instructions

Place the stand on a flat surface.
Set your preferred stand angle.
Set the laptop holder to the open position.
Place the laptop on the stand.
To obtain power for the stand, use the included USB-A –
USB-A cable, one end should be connected to one of the USB 2.0 ports, the other end to the USB-A port on the laptop.

Safety conditions

Use the product under its intended use, as improper use may damage the product.
Do not expose the device to moisture, heat, or sunlight, and do not use the product in a dusty environment.
The device should be cleaned only with a dry cloth.
Independent repairs and modifications result in automatic loss of the warranty.
Hitting or dropping may damage the product.

Warranty

The warranty covers 24 months. Independent repairs and modifications result in automatic loss of the warranty. The warranty card is available for download on our website:
www.savio.net.pl/en/service

Information on the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for infor-mation about disposal methods available in your area. Waste elec-trical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthalates) which can get into air, soil, and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesions of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protecion by proper waste collection. In such a way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for the production of new equipment.

Information for customers and contractors and communication regarding complaints:
Under Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Mor-Iowa 81; 35-323 Rzeszów becomes the Administrator of your data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14. Your data will be processed to perform the contract, by Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your data will be stored based on the Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete, or limit the processing of your data. You have the right to complain to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your data will not be subjected to automated decision-making, including profiling referred to in Article 22 Sections 1 and 4 of the GDPR of April 27, 2016.

PRODUCER