YEPREM Fine Jewellery and Diamond Watches Owner’s Manual
- June 12, 2024
- YEPREM
Table of Contents
YEPREM Fine Jewellery and Diamond Watches
Product Information
The product is a jewelry item with various sizing options available for necklaces, bracelets, handpieces, single rings, multiple rings, and full finger rings. The user manual provides instructions on how to measure and determine the appropriate size for each type of jewelry.
SIZE GUIDE
Whether finding the perfect fit or a gift for a loved one, this size guide will put the right direction.
NECKLACE SIZING
Our standard size for the necklaces is 39 cm.
- Grab a tape measure.
- Wrap it around the neck and mark the place where it joins.
- Lay your tape on a flat surface and check the measurement.
BRACELET SIZING
Our standard size for the bracelets are 17 cm – 17.5 cm.
- Grab a tape measure.
- Wrap it around the wrist you’ll wear and mark the place where it joins.
- Lay your tape on a flat surface and check the measurement.
- Depending on personal preference whether a snug fit or comfort loose fit.
- Snug Fit: Add 0.5cm on the initial size to smoothly fit on the wrist.
- Comfort loose fit: Add 1 cm on the initial size to smoothly fit on the wrist with a touch of breathing room allowing comfortable movements.
HAND PIECE SIZING
Our standard size for the handpiece on the wrist is 15.5 cm or 16 cm. at the bottom of figers of the palm horizontally is 7 cm, and vertically is 7 to 7.5 cm.
- Grab a tape measure.
- Wrap the tape measure around the wrist you’ll wear and mark the place where it joins, lay the tape on a flat surface and check the measurement.
- Place the tape measure horizontally under the palm of the hand you’ll wear and mark the place where it stops, lay the tape on a flat surface and check the measurement.
- Place the tape measure vertically under the palm of the hand you’ll wear and mark the place where it stops, lay the tape on a flat surface and check the measurement.
SINGLE RING SIZING
Our standard size for single ring sizing is 53.
- Grab a tape measure.
- Wrap it around the finger you’ll wear and mark the place where it joins.
- Lay your tape on a flat surface and check the measurement.
- Choose the closest measurement in the chart to identify your ring size.
FINGER CIRCUMFERENCE IN MM| EUROPE| USA| RING SIZE
UK
| JAPAN
---|---|---|---|---
44| 44| 3| F 1/2| 4
45| 45| 3 1/4| G| 5
46| 46| 3 3/4| H| 6
47| 47| 4| H 1/2| 7
48| 48| 4 1/2| I 1/2| 8
49| 49| 4 3/4| J 1/2| 9
50| 50| 5 1/4| K| 10
51| 51| 5 3/4| L| 11
52| 52| 6| L 1/2| 12
53| 53| 6 1/4| M 1/2| 13
54| 54| 6 3/4| N 1/2| 14
55| 55| 7 1/4| O| 15
56| 56| 7 1/2| P| 16
57| 57| 8| P 1/2| 17
58| 58| 8 1/4| Q 1/2| 18
59| 59| 8 3/4| R| 19
60| 60| 9| S| 20
61| 61| 9 1/2| S 1/2| 21
62| 62| 10| T 1/2| 22
63| 63| 10 1/4| U 1/2| 23
64| 64| 10 3/4| V| 24
65| 65| 11| W| 25
66| 66| 11 1/2| W 1/2| 26
67| 67| 11 3/4| X 1/2| 27
68| 68| 12 1/4| Z| 28
69| 69| 12 1/2| Z 1/2| 29
70| 70| 13| | 30
71| 71| 13 1/4| | 31
- You can place the ring you have on the below to find out the sizing.
MULTIPLE RINGS SIZING
Our standard size for multiple rings sizing are index finger 54, middle finger 55, ring finger 53 and pinkie 50.
- Grab a tape measure.
- Wrap it around each finger you’ll wear and mark the place where it joins for each finger separately.
- Lay your tape on a flat surface and check the measurement.
- Choose the closest measurement in the chart to identify each ring size.
FULL FINGER RING HIGHT SIZING
Our standard size for single ring sizing is index finger 54, middle finger 55, ring finger 53 and pinkie 50.
With the height: index finger 7cm, middle finger 8cm, ring finger 7cm and pinkie 6 cm.
- Grab a tape measure.
- Wrap it around each finger you’ll wear and mark the place where it joins on the three levels of each finger, the distal phalanges, intermediate phalanges and proximal phalanges.
- Choose the closest measurement in the chart to identify your ring size.
- Using the measuring tape, measure the height of your finger from the top till bottom.
ANKLET SIZING
Our standard size for anklets is 22 cm.
- Grab a tape measure.
- Wrap it around the ankle you’ll wear and mark the place where it joins.
- Lay your tape on a flat surface and check the measurement.
EAR CUFF SIZING
Our standard size for ear cuffs is a length 6 cm and the width 3 cm.
- Grab a tape measure.
- Hold the Square tool so that one leg touches the back of your ear where it meets your head, and one leg rests on the top of your ear where it meets your head. Stand straight and face forward. Have your associate help you adjust the Square tool so that the side leg is vertical and the top leg is horizontal to the floor.
- Hold the Square tool yourself to keep it in position.
- Have your associate hold the ruler vertically against your cheek with one edge touching the closest part of the cartilage of your ear. Be careful to keep the intersection between the ruler and the Square tool perpendicular (aka -90-degree angle) as possible.
- Use the pencil to mark the front-to-back measurement of your ear on the Square.
- To measure the height of your ear, keep the Square in the same place.
- Have your associate reposition the ruler so that it is horizontal, touching the bottom edge of where your ear meets your head. (For detached earlobes, tuck the ruler behind your earlobe.)
- Mark on the Square the top-to-bottom measurement of your ear.
- Record the height and width measurements and round up to the nearest millimeter.
CROWN SIZING
Our standard size for crowns is 55 cm from fronnt to nape.
Circumference
- Measure all around the head by positioning the tape measure so its edge follows horizontally over the ear.
- Also, measure all around the head by positioning the tape measure so its edge follows the hair line around the head and nape of the neck.
Front to Nape
- Measure from hairline at center of forehead straight back over crown to center of hairline at nape of neck.
Ear to Ear across forehead
- At front of ear, measure from hairline at base of sideburn, up across the hair line along forehead to same point in front of the other ear.
Ear to Ear over top
- Measure from hairline directly above the ear across top of the head to the hairline directly above the other ear.
Temple to Temple round back
- From temple to temple across the back of head.
Nape of Neck
- Measure the width of hairline across the nape of the neck.
BELT SIZING
Our standard size for belts
- Women: 80 cm
- Men: 1 Meter
- Grab a tape measure.
- Wrap it around the waist and mark the place where it joins.
- Lay your tape on a flat surface and check the measurement.
- Measure size from the beginning of the leather on the buckle side to the middle hole.
ADDITIONAL GUIDE
confused between sizes?
- It is better to go for the larger size because it’s easier to size down than size up.
- Get a loved one’s jewelry piece to find out the perfect size.
- For any concerns or enquiries, our advisors are available to provide information or answer any questions instore or virtually
- Mobile: +961 76 116 868
- E-mail: info@yepremjewellery.com