STeam 2BD6R Bluetooth Speaker Installation Guide
- June 26, 2024
- STEAM
Table of Contents
STeam 2BD6R Bluetooth Speaker
Product Information
Specifications:
- Model: XYZ-2000
- Power: 120V, 60Hz, 500W
- Capacity: 2 liters
- Material: Stainless steel
- Dimensions: 10″ x 8″ x 12″
Product Usage Instructions
Initial Setup:
Before using the XYZ-2000, ensure that all parts are clean. Place the base on a flat, stable surface.
Filling the Reservoir:
Open the lid of the reservoir and fill it with water up to the maximum level indicator.
Adding Ingredients:
Add your desired ingredients into the stainless steel cooking pot. Do not exceed the maximum capacity of 2 liters.
Setting the Timer and Temperature:
Use the control panel to set the desired cooking time and temperature according to your recipe.
Cooking Process:
Once everything is set, close the lid securely and start the cooking process. Monitor the progress through the transparent lid.
Cleaning and Maintenance:
After use, unplug the unit and allow it to cool before cleaning. Wash the removable parts with warm soapy water and wipe the base with a damp cloth.
FAQ
Q: Can I use this product for deep frying?
A: No, the XYZ-2000 is designed for slow cooking and simmering. It is not suitable for deep frying.
Q: How do I know when the cooking cycle is complete?
A: The XYZ-2000 will beep and automatically switch to a warming mode once the set cooking time is completed.
Q: Is the cooking pot dishwasher safe?
A: Yes, the stainless steel cooking pot is dishwasher-safe for easy cleaning.
Warm this scientific equipment is an educational product and needs to be used
under the guidance of teachers or adults!
Tips contain small parts, not suitable for children under 3 years old, all
parts cannot be imported
Production instructions
Brief Introduction
- Bluetooth speaker refers to the built-in Bluetooth chip, which replaces the audio equipment connected by traditional wires with Bluetooth connection, and achieves the purpose of convenience and quickness by connecting with Bluetooth playing equipment such as mobile phone tablet computers and notebooks.
- That is to say. Bluetooth technology is applied to traditional digital and multimedia speakers, so that users can freely listen to music in various ways without the trouble of annoying wires. Since the advent of Bluetooth speakers, with the development of intelligent terminals, mobile phones have become cheaper.
- Extensive attention from users such as boards.
- Required Tools: screwdriver, scissors, lighter, etc.
“I don’t remember when I hear it. I remember when I see it I understand when I have done itI”
Procedure
-
1, understand the parts, and pay attention to distinguish the models and specifications of each part.
(Bring your own screwdriver, scissors, tape and other tools) -
understand the Bluetooth module, pay attention to distinguishing the speaker interface and power interface. (The Power terminal interface is red!)
-
Use 7mm screws to install Bluetooth module, switch and battery box on three boards respectively. (Pay attention to distinguish the direction and hole position of the board!)
-
Peel out the wire head about 2cm first, then connect the battery box, switch and 2p terminal wire. Finally, bind the black wire connector.
-
5. Peel the thread head about 2cm and connect 2p terminals on the two loudspeakers Line, note that the black line is connected to the left and the red
-
Use 4mm short screws to fix the two horns. (Pay attention to using short screws!)
-
Insert the 2p terminal of the horn and battery box into the Bluetooth module.
(Note that the power supply is inserted into the red terminal!) -
Assemble the wooden shell of the stereo, pay attention to the corresponding wood board and notch position.
-
Install the bottom board and the top board.
Then use 7mm screws to fix all the screw holes. -
After the production is completed, connect to the mobile phone or computer Bluetooth, and turn on the music player to play the music test! (Under normal circumstances, the power-on Horn will make Didi noise!)
STEAM is an educational concept, which is different from the traditional education method of single discipline and emphasizes book knowledge. STEAM is a practical concept of multidisciplinary education. The success of anything depends not only on the realization of a certain ability but also on various abilities. For example, in the construction process of high-tech electronic products, not only science and technology, but also the use of high-tech means to innovate product functions, but also the beautiful appearance, that is, the comprehensive ability of art and other aspects, so the application of single skill can no longer support the development of talents in the future. In the future, what we need is comprehensive talent in many aspects. So as to explore the concept of STEAM education.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>