savio TR-11-W Wireless Audio Bluetooth Adapter User Manual

: October 30, 2023
: Savio

Table of Contents

Introduction
Installation
Product description
Button operation
Contents of the package
Technical specification
LED diodes description:
Safety conditions
Information of the utilization of electrical and electronic equipment and
CUSSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

savio TR-11-W Wireless Audio Bluetooth Adapter User Manual

Introduction

Thank you for choosing Savio product!

| If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase.
If you want to show our device on SAVIO Facebook Page, we will be very pleased.
---|---
| If there is something that we could improve on our products, please write to us at [email protected]

Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of purchased device it is recommended to read the whole manual.

Installation

Installation of the adapter to devices with line input AUX / Jack 3.5 mm:

Hold the button until LED diode flashes red and blue.
You will hear ‘Power ON’ and then ‘Pairing’ in case of a new connection.
Insert / connect SAVIO TR-11 to the AUX / Jack 3.5 mm slot.
Set the playback source to AUX / Jack 3.5 mm on the receiver.
Using the Bluetooth option on your smartphone start the connection with SAVIO TR-11.*
When devices are connected you will hear the ‘Connected’ statement. The device is ready to use.

Turn on Bluetooth mode in the sending device (e.g. your phone).
Turn on the scanning to find SAVIO TR-11 and then pair it.
If you paired with SAVIO TR-11 before, the transmitting device will connect automatically.

Product description

Input: Jack 3.5 mm
Button: increasing the volume, switching tracks
Button: turning the device on / off, receiving / rejecting calls
Button: decreases the volume, switching tracks
LEDs indicating the device operation mode
Input: Micro USB

Button operation

Button

Press and hold: select next song
One-time press: volume up

Button while playing the track

Press and hold: Power on/off the device
Fast press twice: Call the last dialed number
One-time press: Play music / Pause

Button during conversation

One-time press: Answer an incoming call
Press and hold: Hung up an incoming call

Button

Press and hold: select last song
One-time press: volume down

Contents of the package

SAVIO TR-11 device
Metal adapter Jack 3.5 mm (M) – 3.5 mm Jack (M)
Cable Jack 3.5 mm (M) – Jack 3.5 mm (M)
Charging cable USB (M) -Micro USB (M)
User manual

Technical specification

Bluetooth version: 5.0
Bluetooth protocols supported: AVRCP, HFP, A2DP
Operating range: up to 15 m
Working time: up to 4 h
Charging time: up to 1 h
Built-in microphone: Yes
Notification light: Yes
Frequency bands in which the radio equipment operates: 2400 – 2483.5 MHz
Maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates: 4 dBm
Function keys allow: change track, volume up / volume down, answers / rejects incoming call
Package content: wireless audio adapter, metal Jack adapter 3.5 mm (M) – 3.5 mm (M), charging cable, Jack cable 3.5 mm (M) – 3.5 mm (M), user manual

LED diodes description:

While charging the device:

The diode will turn red to inform about charging of the device.
When the device is fully charged, the diode will turn blue.

While using the device:

When the diode flashes blue and red, it informs that the transmitting device is ready to pair with the sending device.
Quick blue flashes inform about the connection process with the sending device.
If the diode flashes in blue every 5 seconds, transmitting device in forms that the device is correctly connected with the sending device.
The diode flashing red informs about the discharged battery

Safety conditions

Use this device as intended.
Incorrect use of the device may damage it.
Independent repairs and modification results in automatic loss of the warranty.
Hitting or dropping the device could cause damage of the device.
The device should be used in dry area and it should be protected from water and high humidity.

Information of the utilization of electrical and electronic equipment and

batteries

This symbol indicates that electrical appliances should not be dis carded with other household waste.
Used equipment should be handed over to a local collection point for this type of waste or to a recycling center.
Please contact your local authorities for information about disposal methods available in your area.
Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthalates) which can get into air, soil and groundwater when leaking from used appliances.
Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life.
Households may contribute to environmental protection by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.