ONE FOR ALL URC1916 HiSense Universal Replacement Remote User Guide

June 12, 2024
ONE FOR ALL

ONE FOR ALL URC1916 HiSense Universal Replacement Remote

PRODUCT INFORMATION

WARRANTY / GUARANTEE

For information on the warranty and guarantee policies, please visit www.oneforall.com/remoteguarantee or request hard copies via mail to Universal Electronics Inc. 15147 N. Scottsdale Road, Suite H300, Scottsdale, Arizona 85254. Include your full name, product information, and contact information in your request communication.
BATTERIES: This remote requires 2x AAA batteries. Use quality Alkaline batteries to avoid the risk of explosion.

Product Usage Instructions

  • Step 1: Set Up Your Television
1. Put batteries into the remote.
2.  Test some of the keys on the remote. If they work, your remote is ready to use.
3. If the keys do not work, proceed to Step 2.
  • Step 2: Troubleshooting Keys
1. Ensure that your TV is turned on (not on standby).
2. Hold down the RED + BLUE buttons on the remote until the LED blinks twice.
3. Point the remote towards the TV and hold down the POWER KEY until the TV turns off.
4. The LED will blink twice. Test the rest of the keys on the remote. If they work as your original remote did, your remote is ready to use.
5.  If some keys still do not work, proceed to Step 3.
  • Step 3: Learning a New Function
1. Place the original remote facing the One For All remote on a flat surface.
2. Hold down the GREEN + YELLOW buttons on the One For All remote until the LED blinks twice.
3. Press the key on the original remote that you want to learn.
4. The LED will blink twice if successful. Repeat this process for any additional keys you want to learn.
5. When you have learned all the keys you need, press and hold the OK KEY for 3 seconds. The LED will blink twice.

How to Delete a Learned Function

  1.  Hold down the GREEN + YELLOW buttons on the One For All remote until the LED blinks twice.
  2. Press 976.
  3. Press the key you want to reset twice. The LED will flash twice, and the key will revert to its original function.

WARRANTY

WARRANTY / GUARANTEE INFORMATION
Terms and Conditions for “100% Guaranteed To Work” policy, and the separate 1 Year Limited Warranty against defects in material and workmanship can be found at www. oneforall.com/remoteguarantee, or you may request hard copies via mail to Universal Electronics Inc. 15147 N. Scottsdale Road, Suite H300, Scottsdale, Arizona 85254. Please include your full name, product information, and contact information in your request communication. www.oneforall.com

BATTERIES

ONE-FOR-ALL-URC1916-HiSense-Universal-Replacement-Remote-
FIG-2

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use quality Alkaline batteries.

PRODUCT OVERVIEW

ONE-FOR-ALL-URC1916-HiSense-Universal-Replacement-Remote-
FIG-3

USAGE INSTRUCTION

  • STEP 1: SET UP YOUR TELEVISION
    THE MAJORITY OF NEWER HISENSE TVS SHOULD WORK DIRECTLY.
    After putting batteries in, just test some of the keys, and if they work, your remote is ready. If not, follow the next steps:
1. Make sure your TV is on (not on standby).  

Hold down RED + BLUE until the LED blinks twice.

2. Point towards the TV and hold down the POWER KEY until the TV turns off.
  * The remote will send a different Power signal every 3 seconds.
  * As soon as the TV turns off, let go of the POWER KEY.
  * The LED will blink twice. Now test the rest of the keys on the remote. If they work as your original did, your remote is ready to use.

If you find some keys still do not work as expected (or not at all), proceed to the next step.

  • STEP 2: IF STEP 1 DOES NOT WORK AS EXPECTED
    ARE SOME KEYS NOT WORKING AS EXPECTED?
    If you find some keys do not work as expected (or not at all), proceed to the next step.
1. Make sure your TV is on (not on standby).  

Hold down RED + BLUE until the LED blinks twice.

2. Point towards the TV and hold one of the keys that is not working correctly (for example MENU).
  * The remote will send a signal every 3 seconds.
  * When the correct function is shown on the screen (in this case the MENU), let go of the key.
  * The LED will blink twice – your remote is ready to use.

LEARNING

START: LEARN A NEW FUNCTION TO YOUR REMOTE
Your One For All remote can learn any function from your original (working) remote.

  1. Place the original remote facing the One For All remote on a flat surface.

  2. To learn:
    Hold down GREEN + YELLOW until the LED blinks twice

  3. Press 975
    The LED will blink twice.

  4. Press the key on the One For All remote you want to learn on, for Example: the VOL + key

  5. Press the key on the Original remote you want to learn, for Example: the VOL + key of your AUDIO Device

  6. Two blinks: ok. Repeat from step 4 for any more keys to learn.
    Long blink: try again from step 4.

  7. When you have learned all the keys you need, press and hold the OK KEY for 3 seconds. The LED will blink twice

HOW TO DELETE A LEARNED FUNCTION

  1. Hold down GREEN + YELLOW until the LED blinks twice.
  2. PRESS 976.
  3. Press the key to reset twice.
    The LED flashes twice and the key will get back the original function

ABOUT COMPANY

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals