Fontastic Pero True Wireless Headset User Manual
- June 17, 2024
- fontastic
Table of Contents
Fontastic Pero True Wireless Headset User
Thank you
Thank you for purchasing this Fontastic® TWS Headset „Pero“. Please read the user manual carefully and follow the safety instructions.
Package contents
- Pero wireless headset
- Storage and charging case
- USB Type-C® charging cable
- User manual
Overview
- Multifunction sensor
- LED
- Loudspeaker
- Charging contacts
- Headset slot
- Charging status indicator
- Type-C® charging port
Getting Started
Charging the headsets
Insert the headsets into the charging case slots. Close the charging case. By
closing the charging case, the headsets get contact and are automatically
charged in the case.
Charging the case
Charge with cable: Connect the charging cable that came with the case to the
Type-C® charging input of the case and a travel charger or USB port of a
computer to charge the built-in battery.
The charge status indicator flashes while charging and lights up solid when
fully charged.
Switching On/Off
Automatic:
Take both headset units out of the charging case, they turn on automatically.
Put the headsets into the charging case and close it, the headsets turn off
automatically.
Manual:
Tap and hold the multifunction sensor for 5 seconds, the headset will turn
on.
Tap and hold the multifunction sensor for 5 seconds, the headset will turn
off.
Note: Both headsets turn on and off automatically\ when removed from the case or inserted.
Pairing
The Pero headset must be paired with a Bluetooth® enabled device to be used.
- By removing both headset units from the charging case, they will automatically turn on, sync with each other, and enter pairing mode to connect to a Bluetooth® source.
- Search for „PERO“ on your Bluetooth® enabled device and select it from the list of found devices to pair the headset with the Bluetooth device.
Note: The headset units can also be used separately.
Note: When the headset is placed in the charging case, the connection is interrupted. As soon as both headsets are removed, they will automatically reconnect. If the headset units do not connect automatically or an existing connection is disconnected, switch both headsets off and on again either by inserting and removing them from the charging case, or manually.
Note: If the headset does not find a Bluetooth®-enabled device, it switches off after approx. 3 minutes.
Music Control
All control commands are executed with the multifunction sensor.
Play/Pause: Tap the multifunction sensor on either headset unit once.
Skip Backwards: Tap the multifunction sensor of the left headset twice in
quick succession.
Skip Forwards : Tap the multifunction sensor of the right headset twice
in quick succession.
Hands-free functions
Answer/hang up/reject call:
Answer incoming call: Tap the multifunction sensor on either headset unit
once.
End ongoing call : Tap the multifunction sensor on either headset unit
once.
Reject incoming call: Tap the multifunction sensor on either headset unit
once.
Voice assistant
Tap and hold the multifunction sensor for about 3 seconds on either headset
unit to activate the voice assistant.
Volume setting
Increase volume: Tap the multifunction sensor of the left headset 3 times
in quick succession.
Decrease volume: Tap the multifunction sensor of the right headset 3
times in quick succession.
Note: In rare cases, the super bass of the headset may be overdriven by the settings of the mobile phone. In this case, use the „Normalise“ function (also „Adjust volume“) in the audio settings of your phone.
Safety advice
- Do not use the headset at high volume for prolonged periods of time.
- Be careful not to use headset in potentially dangerous situations.
- Do not use the headset while operating a vehicle.
- Never open the device.
- Never immerse the device in water, always protect it from moisture.
- Disconnect electronic devices from the power when not using them for longer time.
- Do not use headphones if they show any visible damage.
Technical data
Headsets
- BT Version: 5.1
- Profiles: Headset, Handsfree, A2DP, AVRCP
- Range: up to 10 m
- Driver: 13 mm
- Impedance: 32Ω ± 15%
- Microphone: 2718 Silicone microphone
- Voice announcement: German/English
- Status LED
- Protection Class: IPX4
- Battery: 30 mAh
- Operating time: up to 4 hours
- Charging time: Approx. 1 hour
- Dimension per unit: 33 x 17 mm
Charging case:
- Battery: 200 mAh (Charges headsets up to 4 times)
- USB Type-C® charging port
- Charging time: Approx. 1.5 hours
- Dimensions: 46 x 25.5 x 46.5 mm
The company is not responsible for any damage due to improper operation.
If you need technical support, please contact our support team by e-mail at service@fontastic.eu.
We hereby declare, that this device carries the CE mark in accordance with the
regulations and standards. It conforms with the fundamental requirements of
the (RED) 2014/53/EU directive.
The full text of the EU Declaration of Conformity is available at the
following Internet address
www.d-parts.de/Konfo
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the national
legal system, the following applies: Electrical and electronic devices may not
be disposed of with domestic waste. Consumers are obliged by law to return
electrical and electronic devices at the end of their service lives to the
public collecting points set up for this purpose or point of sale. Details of
this are defined by the national law of the respective country. This symbol on
the product, the instruction manual or the package indicates that a product is
subject to these regulations.
By recycling, re-using the materials or other forms of utilising old devices,
you are making an important contribution to protecting our environment.
Customer Support
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks is under license.
USB Type-C® and USB-C® are trademarks of USB Implementers Forum.
Improvement and changes of the technical specifications and other data’s could
be made without prior notice.
Registered trademarks are the property of their respective owners.
Fontastic, by D-Parts GmbH
Birkenweiher Str. 16 ● 63505 Langenselbold, Germany ●
www.d-parts.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>