VIVO ‎MOUNT-KB01CW Single Clamp Rotating Keyboard Tray Instruction Manual

June 17, 2024
Vivo

VIVO ‎MOUNT-KB01CW Single Clamp Rotating Keyboard Tray

Product Information

  • Specifications
    • Product Name: Single Clamp Rotating Keyboard Tray
    • SKU: MOUNT-KB01CB/CW
    • Weight Capacity: 11lbs (5kg)
    • Tools Needed: Phillips Screwdriver

Product Usage Instructions

  • Assembly Steps
    • STEP 1: Connect Upper Clamp to Lower Clamp using M8x12mm Screws and 5mm Allen Wrench, based on desktop thickness.
    • STEP 2: Insert Plastic Bushings into Tray Support and secure it to the Lower Clamp using a Swivel Cap.
    • STEP 3: Connect Tray Set to Tray Support using M5x12mm Screws and a Phillips screwdriver.
    • STEP 4: Secure the tray assembly onto the desktop by tightening the Lower Clamp.
    • STEP 5: Place the keyboard and mouse on the Tray Set and adjust as desired.
  • Frequently Asked Questions (FAQ)
    • Q: What is the weight capacity of the keyboard tray?
    • A: The weight capacity of the keyboard tray is 11lbs (5kg). Do not exceed this limit to avoid any injuries.
    • Q: What tools are needed for assembly?
    • A: You will need a Phillips screwdriver for the assembly process.
    • Q: How do I contact customer support?
    • A: You can reach our customer support team at 309-278-5303 or via email at help@vivo-us.com. Our office hours are Monday to Friday from 7:00 am to 7:00 pm CST.

WARNING:

  • If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance.
  • Check carefully to make sure there are no missing or defective parts.
  • Improper installation may cause damage or serious injury.
  • Do not use this product for any purpose that is not explicitly specified in this manual.
  • Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

VIVO-‎MOUNT-KB01CW-Single-Clamp-Rotating-Keyboard-Tray-fig-1
\(1\)

TOOLS NEEDED

  • DO NOT EXCEED WEIGHT CAPACITY.
  • Failure to do so may result in serious injury.

ASSEMBLY STEPS

  • STEP 1
    • Remove backing from Non-Slip Pad (G) and apply to underside of Upper Clamp (C). VIVO-‎MOUNT-KB01CW-Single-Clamp-Rotating-Keyboard-Tray-fig-1 \(5\)
    • Connect Upper Clamp (C) to Lower Clamp (D) using M8x12mm Screws (S-A) and 5mm Allen Wrench (T-A), using the appropriate assembly option for your desktop thickness.
    • 0-65mm Desktop Thickness:
      • Use the top two holes on
      • Upper Clamp.
    • 25mm-90mm Desktop Thickness:
      • Use lower two holes on
      • Upper Clamp.VIVO-‎MOUNT-KB01CW-Single-Clamp-Rotating-Keyboard-Tray-fig-1 \(6\)
  • STEP 2
    • Insert Plastic Bushings (E) into Tray Support (B). Secure Tray Support (B) to Lower Clamp (D) using Swivel Cap (F).VIVO-‎MOUNT-KB01CW-Single-Clamp-Rotating-Keyboard-Tray-fig-1 \(7\)
  • STEP 3
    • Place Tray Set (A) side by side and note the two sets of pilot holes. Identify which set is closer to the combined edge, which will be the backside of the tray. Connect Tray Set (A) to Tray Support (B) from the backside using M5x12mm Screws (S-B) and a Phillips screwdriver.VIVO-‎MOUNT-KB01CW-Single-Clamp-Rotating-Keyboard-Tray-fig-1 \(8\)
  • STEP 4
    • Place the tray assembly onto the desktop. Insert 5mm Allen Wrench (T-A) into the underside of Lower Clamp (D) and tighten to secure to the desktop.VIVO-‎MOUNT-KB01CW-Single-Clamp-Rotating-Keyboard-Tray-fig-1 \(9\)
  • STEP 5
    • Place keyboard and mouse on Tray Set (A) and adjust as desired. VIVO-‎MOUNT-KB01CW-Single-Clamp-Rotating-Keyboard-Tray-fig-1 \(10\)

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us. Open Monday – Friday 7:00 am – 7:00 pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

  • 309-278-5303 AVG.
  • RESOLUTION TIME (within office hrs): 5M 4S
  • www.vivo-us.com Chat live with an agent!
  • AVG. RESOLUTION TIME (within office hrs): < 15 M
  • help@vivo-us.com.
  • AVG. RESPONSE TIME (within office hrs): 1HR 8M
    • 23% within < 15m
    • 38% within < 30m
    • 61% within < 1hr
    • 83% within < 2hr
    • 92% within < 3hr
  • FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com.
  • SKU: MOUNT-KB01CB/CW
  • Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. Instruction Manual https://vivo-us.com/products/mount-kb01cb.
  • GET IN TOUCH| Monday-Friday from 7:00 am-7:00 pm CST

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Vivo User Manuals

Related Manuals