INNOVA SW-18 Fitness Storm Smart Watch User Manual

INNOVA SW-18 Fitness Storm Smart Watch

Features

Thank you

Thank you for using our smart watch INNOVA.

Important! The data provided by the smart watch, such as heart rate, blood oxygen and blood pressure, are merely indicative, it is not an exact medical measuring device.
Even if you are well, go to all the appointments scheduled by your doctor.

Recommendations for people with sensitive skin during use of electronic wrist devices, Smartwatch and Smartband.

The materials used for our INNOVA Smartwatches and Smartbands are selected following a rigorous control of hypoallergenic measures, as well as guaranteeing that all materials comply with current regulations for materials in contact with the skin.

A small number of people, however, may experience some type of skin reaction. If you suspect, or know, that you are allergic or have an above average sensitive skin type, you should monitor the use of these devices for any type of reaction due to said allergies, environmental factors or prolonged exposure to irritants, like soap, sweat, or other causes.

Smartwatches and Smartbands may contain materials such as nickel and acrylates which, even though they are within the permitted amounts in the manufacturing process, may cause skin to react if you are sensitive to them.

If you use these devices for a prolonged period of time, you may be more susceptible to developing skin sensitivities. To avoid possible skin irritations we recommend you do not expose the device to chemicals or use it if your skin has, or has been recently applied with, any of the products listed below:

• Insect repellents
• Moisturizing creams and lotions
• Oils
• Perfumes
• Antiseptic gels
• Soaps
• Sun protection creams

It is recommended that the devices are used when the skin is completely dry and free of any of the aforementioned products to avoid having charging contacts and measurement sensors in contact with wet skin. They are not submersible or waterproof.
Clean the device thoroughly to remove sweat after training and allow it to dry. Prolonged exposure to moisture can cause skin irritation. It is also advisable not to wear these devices too tight or too loose.
If the strap is too tight, it may cause skin irritation. If the strap is too loose, chafing may occur.
The watch strap should be left so that it can move slightly back and forth on the wrist.
If you wear the device for prolonged periods of time, remove it to give your skin a rest. To avoid irritation, swap the device to your other wrist.
If you notice redness, swelling, itching or any other irritation, remove the Smartwatch immediately and consult your physician before using the device again.

Special attention must be paid to the use of these devices in places with relatively low humidity conditions.

When using the Smartwatch/Smartband in places with low relative humidity (dry/poorly ventilated places, low humidity atmospheric conditions, dry indoors, if heating or air conditioning is always on, etc.), as with any other electronic device, it may be affected by charges of static electricity on rare but certain occasions. This may cause damage to the device and also to the person wearing it at that time. Static electricity is everywhere. It surrounds us without us perceiving it. And effective trick to avoid a high percentage of static electricity at home:

• Use a humidifier. Humidity is a good conductor of electricity therefore, by maintaining an acceptable percentage of it, we will avoid static in areas of the home where we metal objects may be found. Small containers of water on top of radiators is another alternative solution.

The use of the devices in bed, whilst sleeping, is especially discouraged for children and the elderly due to the fact that repeated movements during the night may cause, through friction with sheets, blankets, etc. a charge of static electricity. This may result in a sudden discharge of the watch’s battery and/or heating of same as the human body is a conductive element and can cause a reaction to people with sensitive skin, redness, irritation, etc.
If you notice redness, swelling, itching, or any other form of irritation, remove the Smartwatch immediately and consult your physician before using the device again in case you are suffering from any type of reaction, allergic or otherwise.

INNOVA CELLULAR.

INNOVA CELULAR SL
B84215623
C/Severo Ochoa n° 9 nave 8 Modulo B Rivas Vaciamadrid 28521 (Madrid)
Tel: +34 914990624
Fax: +34 916660271

Before using the device please read this instruction manual in its entirety.

Wearing
Place the bracelet on your wrist, and adjust the strap for a comfortable wear, ensuring the sensor is in contact with your skin. If the sensor is not in contact with your skin, the measurements will not be accurate.

Charging

Before using the device for the first time, please ensure the battery is charged. If the device does not turn on, please connect it to the battery charger for it to activate.

Pairing device to phone **

**

IMPORTANT!
Please do not pair your device directly to your phone’s Bluetooth. If you have already done this, please remove it from “paired devices” as it will prevent its connection to the application.

1. Download the application Smart Bracelet INNOVA S-BANDS from Google Play Store / Apple Store or, alternatively, scan the following QR Code and install it.

APP / APK: INNOVA S-BANDS

|
---|---

Minimum System requirements : Android 5.0; iOS9; Bluetooth 4.2

2. Open the application and grant all access requests.
   

3. To finish pairing, press the “Set” icon and then press “Bind devices to…” banner (highlighted). You will then find “SW-18” which, once selected, will pair to your phone.
   The watch should now show local date and time and the top of the application should appear as follows:
   
   From “Message Push” you can set up the APPS from which you wish to receive information on your device (Calls, WhatsApp, Facebook, Twitter, etc.). Restarting and/or removing the device will cause data to be deleted.

4. In the “Step” icon you can view your daily steps and your set objectives / targets. Further below, you can also view a summary of the distance walked as well as other information such as your heart rate and/or sleeping patterns. If you press on the information displayed, another screen will open, and you can start measuring your heart rate or see the details of your sleeping habits. At the bottom you will find “Healthy habit” in which you can specify “eat breakfast”, “go to bed early”, etc.
   

5. Within “Motion” you will find different options such as “walk”, “run” or “bike”. Pressing “Start” and having your GPS activated, you can see the distances achieved as well as the route. To stop swipe the lower bar to the right and press “End”. To see the route, press the gear icon.
   

6. Press “Mine” to view details of different data, a summary of your activities and, in “User Profile”, establish your personal information (sex, age, height, etc.).
   

Charge the bracelet

Use it for the first time to ensure that the battery is in normal condition. If the power is not turned on normally, please connect the charger to charge the device.

Wear it properly

The bracelet is best worn after the ulnar styloid. Adjust the size of the wrist according to the adjustment hole; buckle the wrist strap buckle. The sensor should be close to the skin to avoid moving.

Bracelet function description

Long press the home button to switch on/off the device;
On standby, long press the touch screen 2 seconds switch theme;
Swipe down: Control center;
Swipe up: Enter menu page;
Swipe right/left: Health tricycle, music, sleep, weather, QR.

Interface

Health tricycle

• Number of steps (the outermost ring): The total number of steps every day, reset overnight, and the number of steps can be set on the APP.
• Exercise (middle ring): The data comes from any exercise under exercise, and it is cleared overnight. As long as it is any exercise time in the exercise, it can be accumulated, It can be set on the exercise target APP.

Heart rate / Blood pressure / Blood oxygen

After entering the measurement interface and waiting for a few seconds, the current test result will be displayed. This feature requires the bracelet to support a heart rate sensor.

Music control

The bracelet can control to switch the previous song, the next song, pause/start playback.

Stopwatch function

Enter the stopwatch and click the start button to start timing, click the pause button to stop, and click the reset button to clear the timing.

Photograph

Connected to the app , start the camera from the bracelet or enter the remote camera interface from the APP, shake/turn the wrist/touch the bracelet, and automatically take a photo after a countdown of 3 seconds. Please allow the APP to access the album to save the self-portrait photo.

Find phone

APP is connected , click “Find Phone ” on the bracelet and the phone will emit a prompt tone.

Sleep mode

The latest 7-day records are displayed locally on the sleep details page, and the sleep data details can be viewed by connecting to the APP.

Note: Only when the app is connected and the bracelet is worn to sleep will the sleep data be uploaded to the app and the detection will start at 10 pm.

Weather
Connect to the app and enter this interface to view the weather conditions of the day.

Information mode

Connected to the APP, if the push notification reminder is enabled, when the bracelet pushes multiple reminder messages, you can enter this interface to view the latest message records.

QR code

Scan the QR code with your mobile phone to download the APP

Reset

Resetting this function will clear all data on the bracelet. (like step counting)

More

• About: You can view information about the machine.
• Language: You can set any language in the options.
• Set Date: You can set the date required by the user.
• Set time: You can set the time required by the user.
• Backlight time: There are multiple options on the backlight time setting page.
  When the corresponding time is selected, the screen will automatically turn off.

APP function and settings

Sleep mode

When you fall asleep, the bracelet will automatically enter the sleep monitoring mode and will automatically detect your sleep pattern (deep sleep / shallow sleep / wake up) all night to accurately calculate your sleep quality.

Note: Please note the following description for the Sleep monitoring:

1. Sleep will be recorded, if the time when falling asleep is between 22:00 PM and 6:00 AM. The sleep data will be recorded if you sleep for more than 4 hours.
2. Sleep data synchronization: When wearing the bracelet, it will exit sleep mode only after 15 minutes of getting up and moving around. The sleep data will then be synchronized to the app.
   A. Wear the bracelet while sleeping and ensure that it remains connected to the app.
   B. Do not remove the bracelet from your wrist immediately after waking up, as this may cause a misjudgement of your sleep status.
   C. Sleep will not be recorded, if you fall asleep before 22:00 PM or after 06:00 AM.

Alarm setting

In the connected state, 8 alarms can be set. After setting, it will be synchronized to the bracelet; offline alarm is supported. After the synchronization is successful, even if the APP is not connected, the bracelet will be reminded according to the set time.

Sedentary reminder
Set whether to enable the sedentary reminder function, you can set the reminder interval, if you sit for a long time in the set time, the bracelet will remind you.

Raise your hand to brighten
Turn this function on. When the wristband is in the state of the screen, lift your wrist and turn the screen to yourself to light up the screen.

Do not disturb mode
Turn on the Do Not Disturb mode, the bracelet stops receiving notification messages to avoid reminding messages.

Remove device
Remove device This feature will erase data and remove device.

Looking for a bracelet
In the connected state, click the “Find” option and the bracelet will vibrate.

Other functions
Turn on the vibration setting function, when there are calls, messages or other reminders, the bracelet will vibrate. If it is off, the bracelet will only have a screen reminder without shaking to avoid interruption.

Basic parameters

sensor
System Requirements|

iOS 9.2 or above / Android 8.0 or above

Precautions

1. Please connect the bracelet when synchronizing data.
2. Use the included charging cable to charge.
3. Do not expose the handle ring to moisture for a long time, where the temperature is extremely high or extremely low.

Specifications

Step / Distance / Calories / Heart rate / Blood pressure / Oxygen saturation / Sleep monitoring / Notifications / Alarm clock / Sedentary reminder / Differents exercise mode / Turn the wrist and shine the screen / Find watch / Remote photography / Battery capacity: 150 mah (Up to 7 days (depend of the use)) / NO WATERPROOF / Music control / Stopwatch / Weather / BT frequency band: 2.4 GHz / Maximum emitted RF power < 100 mW

Declaration of conformity

Through this INNOVA CELLULAR, it declares that the INNOVA SMART WATCH FITNESS STORM (SW/18) complies with the essential requirements and any other applicable or enforceable provisions of Directives 2014/30/EU, 2014/53/UE (RED) and RoHS 2011/65/EU annex II amending annex (EU) 2015/863.
To see the complete declaration of conformity, you can access it through the following link: http://www.innovacelular.com/images/web/descargas/descargas/declaracion/declaracion_sw-18.pdf

NOTE: The INNOVA SMART WATCH FITNESS STORM (SW/18) It has a 3-year warranty from the date of purchase. Special importance in the durability of the products have the elements that compose it and that suffer from degradation and loss of capacities due to their use, being understood as normal wear that they lose capacity, especially in the case of rechargeable batteries, depending largely on infinity of external factors (hours of use, charge and discharge cycles, use of inappropriate chargers, temperatures of use, not respecting the recommended charging times, etc…)

For the guarantee of wear and tear parts, it must be taken into account that the loss of autonomy of the battery as a result of its aging does not imply a manufacturing defect, so it is considered considered normal that after 6 months have a loss of 10%, at 15 months 20% – 30% at 24 months 45%, all corresponding to proper use of the battery and the charge and discharge cycles carried out.Any battery that presents symptoms other than those listed in this manual, will be inspected by the technical service and assessed for its affectation to guarantee. If after 24 months from its purchase the battery presents symptoms different from those detailed, it will be understood to be exempt from guarantee for the reasons stated above and will be left out of the inspection process, becoming the customer who, if they so wish, must reliably demonstrate that the battery presented defects other than those detailed in this manual before those 24 months.

Safety warnings

Important Safety Information: Handle the Smart Watch with care.  They contain sensitive electronic components, including batteries, and may malfunction, affect performance, or cause damage if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat, liquid, or high-pressure environments. concentrations of industrial chemicals, including nearly evaporated liquefied gases such as helium. Do not use the Smart Band if it is damaged.
Batteries: Do not try to replace the battery of the Smart Watch by yourself, as you could damage the Smart Watch and cause overheating and injury.
Charge: Charge the Smart Watch with the charging cable and a power adapter or a computer, charge the device only with an adapter that meets relevant national, international and regional safety standards. Other adapters may not meet applicable safety standards and their use to charge the Smart Watch may present the risk of injury or death. Using damaged cables or chargers, or charging the device if they are wet, may cause fire, electric shock, injury, or damage to the case or other belongings.
Prolonged exposure to heat: Avoid prolonged skin contact with the device, power adapter, charging cable and its connector, or the wireless charger when connected to a power source, as this may cause discomfort or injury.
Choking hazard: The Smart Watch and the small parts included may present a choking hazard to small children or cause other injuries. Always keep them out of the reach of children.
Interference with medical devices: The Smart Watch and charger contain components and radios that emit electromagnetic fields. These electromagnetic fields and magnets that the device may contain may interfere with the operation of pacemakers, defibrillators, or other medical devices. Keep a safe distance between the medical device and the Smart Watch. Request specific information about the medical device from the manufacturer and your doctor. Stop using the Smart Watch if you suspect it is interfering with your pacemaker, defibrillator, or other medical device.
Skin irritations: The Smart Watch can cause skin irritation if not cleaned properly. Regularly clean the Smart Watch with a soft, lint-free cloth. In the event of any type of skin reaction, stop using the Smart Watch. If the problem persists, see your doctor.
Electrostatic discharges : When using the Smart Watch in areas where the air is very dry, it is easy to accumulate static electricity, so you may feel a small electrostatic discharge from the Smart Band on your wrist. To minimize this risk, avoid using the Smart Band in extremely dry environments, or touch a grounded, unpainted metal object before putting on the Smart Watch.
Important Driving Information: Discoloration of the connector and the bottom of the Smart Watch after continued use is considered normal. Dirt, debris, and exposure to moisture could cause discoloration.

Customer service

Only in English, Spanish and Portuguese Customer Service: +34 91 713 94 98
Customer service schedule: Mon. to Thu. from 08:00 to 14:00 and from 15:30 to 17:30 and on Fri. from 09:00 to 14:00
Working hours: Mon to Thu from 08:00 to 14:00 and from 15:30 to 17:30 and Fri. from 09:00 to 14:00
Customer support opening hours:
From Monday to Thursday from 08:00 to 14:00 and from 15:30 to 17:30 Friday from 09:00 to 14:00 sac@innovacelular.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>