innova ALT-38 Portable Sound System User Guide
- May 15, 2024
- InnOVA
Table of Contents
innova ALT-38 Portable Sound System
Specifications:
- Power: 10W
- Functions: BT, TWS, USB reader, TF reader, FM Function, AUX-IN, Rec function, Remote control, Wired mic input
- Battery: 3.7V – 1800 mAh Built-in rechargeable battery
- Autonomy: Approximately 4 hours
- LED Lighting: Dynamic
- Size: 240 x 222 x 375 mm
- BT Frequency Band: 2.4GHz
- Maximum Emitted RF Power: < 100 mW
Product Usage Instructions:
1. Powering On/Off:
To power on the device, press and hold the power button until the LED indicator lights up. To power off, repeat the same step.
2. Bluetooth Connection:
Activate Bluetooth on your device and search for the speaker’s name to pair. Once paired, you can play music wirelessly.
3. TWS Function:
If you have two ALT/38 speakers, you can pair them for True Wireless Stereo (TWS) sound. Follow the specific instructions provided in the manual for this feature.
4. USB/TF Reader:
You can play music directly from a USB drive or TF card by inserting them into the corresponding slots on the speaker.
5. FM Radio:
Switch to FM mode to listen to radio stations. Use the controls to tune into different frequencies.
6. Using Remote Control:
The remote control allows you to conveniently operate the speaker from a distance. Ensure it is pointed towards the speaker for proper functioning.
FAQ:
- Q: How do I charge the speaker?
- A: To charge the speaker, use the provided charging cable and connect it to a power source. The LED indicator will show charging status.
- Q: Can I use the speaker while it’s charging?
- A: Yes, you can use the speaker while it’s charging, allowing for uninterrupted music playback.
- Q: How do I reset the speaker?
- A: To reset the speaker, locate the reset button (usually near the ports) and press it using a small pin or paperclip.
To customers
Thank you for your support and trust on purchasing the products of our company. To fully exert the function of the product, we suggest you to read the operating instructions carefully before using it, for the convenience of grasping the connection method and using points. Please take care of the operating instructions after reading it for the purpose of further reference. This manual and product parameter are updated andupdated from time to time. Subject to change without prior notice, please refer to the actual product
Function Description
Panel
-
Power switch, total volume adjustment
-
The charging light is on, the full light is off
-
Audio input
-
The DC 5V power input
-
USB port input
-
Micro SD input
-
Next Song (1. FM: Channel down)
-
Short press play/pause (FM: Auto search); long press the recording to play, long press to exit the recording during recording playback.
-
Short press on the previous track (received: previous radio); for USB or TF, long press to record, then press to exit recording and play the current recording
-
Mode selection (short press USB, Micro SD, Radio and AUX-in; long press LED off/on)
-
LED display; remote control receiving window
-
Echo adjustment
-
Microphone volume adjustment
-
Microphone input
Remote -
Mode selection (switch USB, Micro SD, Radio and AUX-in)
-
Standby
-
Short press play/pause (FM: Auto search); long press the recording to play, long press to exit the recording during recording playback
-
Short press the equalizer. When the recording is playing, long press to delete the recording.
-
REPEAT (Short press single loop playback / full loop playback, long press microphone priority on/off)
-
Number selection (0-9)
-
LED light on/off
-
Volume up / Volume down
-
Next / Previous
-
Mute
TWS Function
- Turn on two devices of the same model and switch the two devices to Bluetooth mode. The distance between the two devices is less than 50 cm
- The first time you use the TWS connection, you can select any device as the host and the other as the slave. Press and hold the “Next” button for 3 seconds, and the USB display flashes to indicate that Bluetooth is conneted.
- Until you hear a “Beep” sound, the devices are connected to each other.
- Turn on the Bluetooth on your device and connect to the ALT-38 the next two speakers will automatically connect to each other
- Disconnect TWS: Press and hold the “Next” button for 3 seconds. Once you hear a beep, the TWS function will be disconnected.
Features
10 W / BT / TWS / USB reader / TF reader / FM Function / AUX-IN / Rec function / Remote control / Wired mic input / 3.7V – 1800 mAh Battery / Dynamic LED lighting / Built in rechargeable battery / Autonomy approx: 4 H / Wired microphone / DC5V / Size: 240X222X375 mm / BT frequency band: 2.4 Ghz / Maximum emitted RF power < 100 mW
Customer service
- +34 91 713 94 98
Horario de atención al cliente:
De lun. a Jue. de 08:00 a 14:00 y de 15:30 a 17:30 y los Vier. de 09:00 a
14:00
Working hours: Mon to Thu from 08:00 to 14:00 and from 15:30 to 17:30 and Fri.
from 09:00 to 14:00
Horário de funcionamento de apoio ao cliente:
De 2ª a 5ª feira das 08:00H ás 14:00H e das 15:30H ás 17:30H, 6ª feira das 09:00H as 14:00H
Declaration of conformity
Through this INNOVA CELLULAR, it declares that the SISTEMA PORTATIL DE SONIDO WIRELESS INNTECHNO (ALT/38) complies with the essential requirements and any other applicable or enforceable provisions of Directives 2014/30/EU, 2014/53/UE (RED) y RoHS (EU) 2011/65/EU annex II amending annex (EU) 2015/863.
To see the complete declaration of conformity, you can access it through the following link:
Guarantee
NOTE: The SISTEMA PORTATIL DE SONIDO WIRELESS INNTECHNO (ALT/38) It has a
3-year warranty from the date of purchase. Special importance in the
durability of the products have the elements that compose it and that suffer
from degradation and loss of capacities due to their use, being understood as
normal wear that they lose capacity, especially in the case of rechargeable
batteries, depending largely on infinity of external factors (hours of use,
charge and discharge cycles, use of inappropriate chargers, temperatures of
use, not respecting the recommended charging times, etc…) For the guarantee of
wear and tear parts, it must be taken into account that the loss of autonomy
of the battery as a
result of its aging does not imply a manufacturing defect, so it is considered
normal that after 6 months have a loss of 10%, at 15 months 20% – 30% at 24
months 45%, all corresponding to proper use of the battery and the charge and
discharge cycles carried out. Any battery that presents symptoms other than
those listed in this manual, will be inspected by the technical service and
assessed for its affectation to guarantee. If after 24 months from its
purchase the battery presents symptoms different from those detailed, it will
be understood to be exempt from guarantee for the reasons stated above and
will be left out of the inspection process, becoming the customer who, if they
so wish, must reliably demonstrate that the battery presented defects other
than those detailed in this manual before those 24 months
Safety warnings
-
Non-professionals and service organizations should not attempt to repair or modify the unit. Do not take the cover. Do not touch the internal parts, it is dangerous! Otherwise, it will cause a serious malfunction. For help or repair, please contact your dealer for professional assistance.
-
Please charge the battery when it is used up; if it is not used for a long time, please charge the machine once every 30 days; to avoid the battery storage capacity is reduced or damaging the machine for a long time. Safety and handling: For more information on safety and handling, see the User Manual. Important Safety Information: Handle the speaker with care. They contain sensitive electronic components, including batteries, and may malfunction, affect performance, or cause damage if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat, liquid, or high-pressure environments. concentrations of industrial chemicals, including nearly evaporated liquefied gases such as helium. Do not use the speaker if it is damaged. Batteries: Do not try to replace the speaker’s battery yourself, as you may damage the batteries and cause overheating and injury. Charge: Please charge the speaker with the charging cable and a power adapter or a computer, charge the device only with an adapter that meets relevant national, international and regional safety standards. Other adapters may not meet applicable safety standards and their use to charge the speaker could present the risk of injury or death.
Using damaged cables or chargers, or charging the device if they are wet, may cause fire, electric shock, injury, or damage to the case or other belongings.
Prolonged exposure to heat: Avoid prolonged exposure to extreme temperatures the device and batteries could be damaged and/or explode,- Choking hazard: The speaker and the small parts included may present a choking hazard to small children or cause other injuries. Always keep them out of the reach of children.
- Device Cleaning: Regularly clean the speaker with a soft, lint-free cloth.
- Electrostatic discharges: When using the speaker in areas where the air is very dry, it is easy to accumulate static electricity, so you may notice a small electrostatic discharge coming from the speaker. To minimize this risk, avoid using the speaker in extremely dry environments, or touch a grounded, unpainted metal object before touching the speaker.
- Important Driving Information: Discoloration of the device after continued use is considered normal. Dirt, debris, and exposure to moisture could cause discolouration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>