Innova WT22B Time Reloj Casual Seattle User Manual

Innova WT22B Time Reloj Casual Seattle

Specifications

• Digital Casual Seattle Watch
• Alarm Clock
• Not Submersible

Product Usage Instructions

Standard Display and Button Function

• ALARM ON: A A.M. MORNING TIME / P PM AFTERNOON TIME
• L-LIGHT: NIGHT BUTTON (Long press for changing color light)
• M-MODE: FUNCTION SELECT BUTTON
• S-START: START DIGIT CARRY BUTTON

Time and Date Adjustment

• Use the MODE button to select the desired setting (Normal Time Display Mode, Stopwatch Function, Alarm Time, etc.)
• Use the START button to enter the adjustment mode
• Adjust the time and date using the appropriate buttons

Alarm Function

• Set and activate the alarm using the designated buttons
• Adjust the alarm time as needed

Light Function

• Press and hold the LIGHT button to change the color of the light

FAQ

Q: Is the watch submersible?

A: No, the watch is not submersible. Avoid exposing it to water.

Q: How do I adjust the alarm on the watch?

A: To adjust the alarm, use the designated buttons as indicated in the user manual.

Q: What should I do if the watch discolors after use?

A: Discoloration due to dirt, debris, or exposure to moisture is considered normal. Clean the watch regularly to maintain its appearance.

Features

• Digital clock
• Alarm
• Not submersible
• Chronometer
• It works with a button battery

Specifications

• Digital watch / Works with a button battery / Date and Time / Light / Stopwatch / Alarm / Dial size: 3.5 cm Ø / Strap measurements: 26,6 cm

Indications

1. Do not use in the water or a wet environment, prevent water from entering the watch (no is waterproof)
2. Do not use it in extremely boiling or freezing environments.
3. Avoid dropping it onto the ground or shaking it violently, as those might cause damage to the watch.
4. Do not put it near gasoline, detergent, spraying agent, adhesion agent, oil paint, etc. The chemical actions of them might damage the sealing ring, the watch case, and the surface of the watch.
5. You can rinse the surface of the watch with a soft cloth and clean water but do not use chemicals.
6. Do not rinse the painted patterns on your watch forcibly.
7. Do not stretch the watchband too tightly around your wrist. The tightness is reasonable when your finger can be inserted in.
8. Place the watch in a dry environment when unused.
9. The coating of the watch may fade or scuff if it is under pressure long-term touch, abrasion, or strong friction.
10. The watchband is made of resin. So if you find any white powder on the watchband, wipe it off with a cloth. The powder does not cause any hurt to your skin or clothes. The watchband may age quickly, crack or break if it bears sweat or dampness. If there is any dirt or drips, wipe them off with a soft cloth as soon as possible.
11. The watch contains precise electronic elements, do not open the cover by yourself. If there is any vapor or drips inside the watch case, please send it to the specialist to be disassembled and repaired.
12. Keep well the operation instructions and the other attached files for future reference.

Standard display and button function

• Operate and adjust the watch according to the following indications on the screen.
• SIGN INDICATION/BUTTON POSITION/ FUNCTION ALARM ON
• A AM MORNING TIME
• P PM AFTERNOON TIME COLD
• L-LIGHT NIGHT BUTTON (Long press for changing color light)
• M-MODE FUNCTION SELECT BUTTON S-START
• S-START DIGIT CARRY BUTTON DATE DISPLAY BUTTON STOPWATCH TIMEKEEPING ON/OFF BUTTON
• R-RESET TIME ADJUST BUTTON ALARM TIME DISPLAY STOPWATCH RESET BUTTON

FUNCTION AND SPECIFICATION

1. Standard display: hour, minute, second, month, date, week
2. Cold light function
3. Stopwatch stage timekeeping function
4. Alarm function
5. Service temperature: 5º C – 35º C
6. Battery: 1.5V high-capacity alkaline Zn-Mn button battery

Life of the battery can supply power for 18 months approx under the following situations:

• 3 seconds of illumination every day
• 60 seconds of alarm every day

OPERATION

Press the “M” button, the mode will change in turn as follows:

• *M:** When operating in “Stopwatch Function Operation Mode” or “Alarm Time Adjust Mode”, if the “S” or “R” button was pressed before, pressing the “M” button can back to “Normal Time Display Mode” directly.
• In “Normal Time Display Mode”: press the “S” button to display the date; press the “R” button to display the alarm time.
• 12/24Time System Display: In “Normal Time Display Mode”, press “M” thrice to enter into “Time Adjust State”, press the “R” button twice to alter into “Hour Adjust State’, then press “S” button until 12/24 Time System display on the screen, and then press “M” once to back to “Normal Time Display Mode”.
• Time Adjusting: In “Normal Time Display Mode”, press “M” thrice to enter into “Time Adjust State”, the second value blinks, press “S” to adjust the second value; press the “R” button, and the minute value would blink, press “S” to adjust minute value; then press “R” and “S” respectively to adjust hour value, date, month, week; and then press “M” to back to normal mode.
• Alarm Time Setting: In”Normal Time Display Mode”, press the “M” button twice, then press “S” to set the hour value; press “R” once, then press “S” again to set the minute value; press “M” to back to normal mode,
• How to use the stopwatch: In “Normal Time Display Mode”, press the “M” button once to enter into “Stopwatch Function
• Operation Mode”, press the “S” button to start timekeeping, press “S” again to stop timekeeping, and the count value will display on the screen; Press the “R” button to reset, press the “M” button to back to “Normal Time Display Mode”.
• How to on/off Alarm, Hourly Chime function: hold the R” button, then press “S” to on/off Alarm Function: when the Alarm On”, the signal will display on the screen, when the alarm rings, press “S” to stop ringing, It would ring after 4-5 minutes, press “R” to stop again-ringing. Hold the “R” button, then press “M” to on/off the Hourly Chime Function.
• Cold Light Lamp: press the “L” button to turn on the cold light.
• Note: long-term use of cold light would be power-consuming.

Declaration of conformity

• Through this INNOVA CELLULAR, it declares that the RELOJ CASUAL SEATTLE (WT/22B) complies with the essential requirements and any other applicable or enforceable provisions of Directives 2014/30/UE y RoHS 2011/65/EU Annex II amending Annex (EU) 2015/863.
• To see the complete declaration of conformity, you can access it through the following link: http://www.innovacelular.com/images/web/descargas/descargas/declaracion/declaracion_wt22b.pdf

Customer service

• Only in English, Spanish, and Portuguese Customer Service
• Customer service hours: Delun. to Thu. from 08:00 to 14:00 and from 15:30 to 17:30 and on Fri. from 09:00 to 14:00
• Working hours: Mon to Thu from 08:00 to 14:00 and from 15:30 to 17:30 and Fri. from 09:00 to 14:00

Guarantee

DEVICE

• ITEM: ___
• Serial number: ____

ESTABLISHMENT

Purchase date: ___

• NOTE: The RELOJ CASUAL SEATTLE (WT/22B) It has a 3-year warranty from the date of purchase. Special importance is the durability of the products has the elements that compose them and that suffer from degradation and loss of capacity due to their use, being understood as normal wear that they lose capacity, especially in the case of rechargeable batteries, depending largely on an infinity of external factors (hours of use, charge and discharge cycles, use of inappropriate chargers, temperatures of use, not respecting the recommended charging times, etc…)
• For the guarantee of wear and tear parts, it must be taken into account that the loss of autonomy of the battery as a result of its aging does not imply a manufacturing defect, so it is considered normal that after 6 months have a loss of 10%, at 15 months 20% – 30% at 24 months 45%, all corresponding to proper use of the battery and the charge and discharge cycles carried out.
• Any battery that presents symptoms other than those listed in this manual, will be inspected by the technical service and assessed for its affectation to guarantee. If after 24 months from its purchase the battery presents symptoms different from those detailed, it will be understood to be exempt from guarantee for the reasons stated above and will be left out of the inspection process, becoming the customer who, if they so wish, must reliably demonstrate that the battery presented defects other than those detailed in this manual before those 24 months.

Warnings

• Safety and handling: For more information on safety and handling, see the User Manual.

Important Safety Information:

• Handle the watch with care. They contain sensitive components and can malfunction, affect function, or cause damage if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat, liquid, or environments with high concentrations of industrial chemicals, including nearly evaporated liquefied gases such as helium.
• Do not use the watch if it is damaged.
• Avoid prolonged skin contact with the device.
• Choking hazard: The clock and the small parts included may present a choking hazard to small children or cause other injuries.
• Always keep them out of the reach of children.
• Skin irritations: The watch can cause skin irritation if not cleaned properly.
• Regularly clean the watch with a soft, lint-free cloth.
• In case of any type of skin reaction, stop using the watch.
• If the problem persists, see your doctor.

Important Information:

• Discoloration of the watch after continued use is considered normal. Dirt, debris, and exposure to moisture could cause discoloration.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>