INNOVA ALT-42 Portable BT v5.0 Speaker Instruction Manual
- June 1, 2024
- InnOVA
Table of Contents
INNOVA ALT-42 Portable BT v5.0 Speaker
Component
- Bluetooth Speaker X 1
- Charging cable X 1
Specification
- BT: V5.0, transmission range 10 meter
- Input: DC 5V
- Output: 10W
Speaker: 2,5Ω – 10W – 6,5″ X 1
- Battery capacity: 2000 mAh
- FM frequency range: 87,5 – 108 MHz. Built-in antenna
- Music mode: Support MP3 play. Maximum capacity support 32 GB
Key manual
- Power ON/OFF
- LED MODE
- Previous song / VOL –
- PLAY / PAUSE / SCAN
- Next song / VOL +
- MODE
- Charging indication
- Mic input
- AUX-IN
- USB port
- TF card port
- DC 5V charging port
Bluetooth function
- Turn on the power switch or press the MODE key repeatedly into Bluetooth mode.
- Turn on the Bluetooth connection in your phone and search Bluetooth name “ALT-42”, click to connect. Once connected, you can play music in the Music application on your phone.
PS: Please make sure your phone volume is turned on and turn up the volume of your phone to a suitable range.
TWS Function
- Turn on another same type Bluetooth speaker and keep both of them in Bluetooth function.
- Press and hold the MODE key of one of the speakers and don’t release it until you hear the bell ring.
Wait for a moment. The speaker will connect to another speaker automatically.
PS: If another speaker was connected to the same phone before, you should
disconnect it on the phone first.
Music Mode
- Put in a Micro SD card or USB flash disk or press MODE key repeatedly into music mode for playing MP3 Music in the Micro SD card or USB flash disk.
- Press key can play/pause music, press the wi key can switch songs, and press and hold key can turn up / down the volume of the speaker.
FM Radio
- Turn on the speaker and press the MODE key repeatedly into FM Radio Mode.
- Press and hold the key for a second, and the speaker will search and store the broadcast channel automatically. Once the search is finished, you can press a key to switch the broadcast channel.
PS: The speaker should close to windows or balconies and stay away from interference like fluorescent lame, computers, motors and so on, which may improve the listening effect in FM radio.
AUX input
- Use a suitable audio cable (not included) to connect audio output equipment. Turn on the equipment and play music in a suitable volume.
- Put the audio cable into the AUX Input port of the speaker and you can press the MODE key repeatedly to switch into AUX Input Mode.
- Press key can play or pause, and press and hold key can turn up/down the volume.
MIC Port
- Put the wired Microphone (not included) into the MIC Port, Turn on the Microphone then you can use it.
- PS: In FM Mode, you can not use Microphone Function, Please switch to other modes, also. Do not head to the woofer, otherwise there will be noise. Please turn off the microphone when you do not use
LED Light Function
- Press LED key repeatedly to switch LED Light Mode. Press the key and hold for a second can turn on/off the LED light function.
- PS: The machine may turn off the LED light automatically in the FM radio function to decrease interference for a better listening effect.
Features
- BT
- TWS
- USB reader
- TF reader
- FM radio
- AUX-IN
- Mic port (mic not included)
- LED light
- Speaker: 6,5″ X 1
- Battery: 3,7 V – 2000 Mah
- Output power: 10 W
- Input: DC 5V, 1A
- Playing time: Up to 2.5 H (Depending on use)
- BT frequency band: 2.4 Ghz
- Maximum emitted RF power < 100 mW
Declaration of conformity
Through this INNOVA CELLULAR, it declares that the SISTEMA PORTATIL DE SONIDO WIRELESS INNSALSA (ALT/42 (HY-609)) complies with the essential requirements and any other applicable or enforceable provisions of Directives 2014/53/UE and RoHS Directive 2011/65/EU + (EU) 2015/863 (RoHS 2.0) To see the complete declaration of conformity, you can access it through the following link: https://www.innovacelular.com/descargas/declaracion/declaracion_alt42.paf.
Guarantee
NOTE: The SISTEMA PORTATIL DE SONIDO WIRELESS INNSALSA (ALT/42 (HY-609))
has a 3-year warranty with the ticket from the date of purchase, the device
has the possibility of repair or change in case there is a problem in its
operation due to a factory defect.
Product defects, whether physical or functional, caused by misuse by the user
or caused by external factors, are not covered by the warranty.
Safety warnings
-
For more information on safety and handling, see the User Manual.
-
Handle the speaker with care. They contain sensitive electronic components and may malfunction, impair operation, or cause damage if dropped, burned, punctured, crushed, disassembled, or exposed to excessive heat, liquid, or environments with high concentrations of industrial chemicals, including nearly evaporated liquefied gases such as helium. Do not use the speaker if it is damaged.
-
Do not try to replace any part of the speaker yourself, as this could damage it and cause overheating, short circuits and injuries.
-
Do not expose the speaker to extreme temperatures, whether cold or heat, as this could affect the operation SK
of the device. The speaker and the included small parts may present a choking hazard to small children or cause other injuries,
so always keep them out of the reach of children. The speaker contains components and radios that emit electromagnetic fields. These electromagnetic fields and
magnets that the device may contain may interfere with the operation of pacemakers, defibrillators or other medical devices. Leave a safety distance between the medical device and the speaker. Regularly clean the speaker with a soft, lint-free cloth. -
When using the speaker in areas where the air is very dry, it is easy to build up static electricity, so you may notice small electrostatic discharges coming from the speaker.
-
To minimize this risk, avoid using the speaker in extremely dry environments, or touching an unpainted, grounded metal object before use.
-
Discoloration of the item after continued use is considered normal. Dirt, debris, and exposure to moisture could cause discolouration.
Customer Service
- Only in English, Spanish and Portuguese
- Customer service / Customer Service / Customer support service (English):
- +34 91 713 94 98
- Customer service hours:
- From lun. to Jue. from 08:00 to 14:00 and from 15:30 to 17:30 and when you arrive. from 09:00 to 14:00
- Working hours: Mon to Thu from 08:00 to 14:00 and from 15:30 to 17:30 and Fri. from 09:00 to 14:00
- Customer support opening hours:
- From Monday to Thursday from 08:00 to 14:00 and from 15:30 to 17:30 Friday from 09:00 to 14:00
- sac@innovacelular.com.