Innova SW14 Smart Watch Fitness Breeze User Manual
- May 15, 2024
- InnOVA
Table of Contents
Innova Smart Watch
Fitness Breeze
USER MANUAL SW/14
SW14 Smart Watch Fitness Breeze
Recommendations for people with sensitive skin during use of electronic wrist
devices, Smartwatch and Smartband.
The materials used for our INNOVA Smartwatches and Smartbands are selected
following a rigorous control of hypoallergenic measures, as well as
guaranteeing that all materials comply with current regulations for materials
in contact with the skin.
A small number of people, however, may experience some type of skin reaction.
If you suspect, or know, that you are allergic or have an above average
sensitive skin type, you should monitor the use of these devices for any type
of reaction due to said allergies, environmental factors or prolonged exposure
to irritants, like soap, sweat, or other causes.
Smartwatches and Smartbands may contain materials such as nickel and acrylates
which, even though they are within the permitted amounts in the manufacturing
process, may cause skin to react if you are sensitive to them. If you use
these devices for a prolonged period of time, you may be more susceptible to
developing skin sensitivities. To avoid possible skin irritations we recommend
you do not expose the device to chemicals or use it if your skin has, or has
been recently applied with, any of the products listed below:
- Insect repellents
- Moisturizing creams and lotions
- Oils
- Perfumes
- Antiseptic gels
- Soaps
- Sun protection creams
It is recommended that the devices are used when the skin is completely dry
and free of any of the aforementioned products to avoid having charging
contacts and measurement sensors in contact with wet skin.
They are not submersible or waterproof. Clean the device thoroughly to remove
sweat after training and allow it to dry. Prolonged exposure to moisture can
cause skin irritation. It is also advisable not to wear these devices too
tight or too loose. If the strap is too tight, it may cause skin irritation.
If the strap is too loose, chafing may occur.
The watch strap should be left so that it can move slightly back and forth on
the wrist. If you wear the device for prolonged periods of time, remove it to
give your skin a rest. To avoid irritation, swap the device to your other
wrist. If you notice redness, swelling, itching or any other irritation,
remove the Smartwatch immediately and consult your physician before using the
device again. Special attention must be paid to the use of these devices in
places with relatively low humidity conditions. When using the
Smartwatch/Smartband in places with low relative humidity (dry/poorly
ventilated places, low humidity atmospheric conditions, dry indoors, if
heating or air conditioning is always on, etc.), as with any other electronic
device, it may be affected by charges of static electricity on rare but
certain occasions. This may cause damage to the device and also to the person
wearing it at that time. Static electricity is everywhere. It surrounds us
without us perceiving it. An effective trick to avoid a high percentage of
static electricity at home:
- Use a humidifier. Humidity is a good conductor of electricity therefore, by maintaining an acceptable percentage of it, we will avoid static in areas of the home where we metal objects may be found. Small containers of water on top of radiators is another alternative solution. The use of the devices in bed, whilst sleeping, is especially discouraged for children and the elderly due to the fact that repeated movements during the night may cause, through friction with sheets, blankets, etc. a charge of static electricity. This may result in a sudden discharge of the watch’s battery and/or heating of same as the human body is a conductive element and can cause a reaction to people with sensitive skin, redness, irritation, etc.
If you notice redness, swelling, itching, or any other form of irritation, remove the Smartwatch immediately and consult your physician before using the device again in case you are suffering from any type of reaction, allergic or otherwise.
INNOVA CELLULAR.
INNOVA CELULAR SL
B842 15623
C/ Severo Ochoa n* 9 nave 8 modulo B
Rivas Vaciamadrid 28521 (Madrid)
Tel. +34 914990624
Fax. +34 916660271
Thank you for using our smart watch INNOVA.
Important! The data provided by the smart watch, such as heart rate,
blood oxygen and blood pressure, are merely indicative, it is not an exact
medical measuring device. Even if you are well, go to all the appointments
scheduled by your doctor.
Welcome to use our high-performance wristband smart bracelet which creates
thoughtful and health experience for you.
Device maintenance
Please remember the following tips when you maintain your smart bracelet:
- Clean the smart bracelet regularly, especially its inner side, and keep it dry.
- Adjust the smart bracelet tightness to ensure air circulation.
- Excessive skincare product should not be used for the wrist wearing the smart bracelet.
- Please cease wearing the smart bracelet in case of skin allergy or any discomfort.
Schematic diagram of main body of the smart bracelet
Power-on
Long press the side button for 3 seconds or plug in the charging clamp to
charge the smart bracelet.
Downloading and binding of smart bracelet APP
Note: your mobile phone must support Android 5.1 or IOS 8.0 or above, and
Bluetooth 4.2 or above.
- Download from Apple Store or Google play and install APP or scan QR code with mobile phone to download APP.
|
---|---
https://itunes.apple.com/es/app/da-fit/id1316004998?mt=8| https://play.google.com/store/apps/details?id=com.crrepa.band.dafit&hl=en_US - Pairing smart bracelet with APP:
Please do not pair the watch directly to your phone’s Bluetooth.
If you have already performed this operation, please remove it from the list of paired devices as it will prevent the connection to the APP.
2.1. Open the APP
2.2. Update your personal details (gender, birth year, etc.) and press the check mark. Once done, grant all permissions reques ted by the APP.
2.3. To link the watch to your phone press “To Add”.
2.4. The phone will search, and display, SW-14. Select it to pair the watch to your phone.
Once synchronization is complete your watch will display local date and time.
2.5. When you press the watch icon (bottom middle) you will see the following screen:
Here you can set up notifications, alarms and the background image (can be personalized). In “Others” you can establish time format (12/24 hours), reminders, etc.
2.6. The last icon, on the lower right, will show “My” screen. Here you can complete the details of your profile and establish your objectives.
Introduction of smart bracelet functions
Power-on status switch the menu interfaces of main screen, as the interfaces shown in the following;
Remove Device
For the Android mobile phone, the device can be disconnected from your mobile
phone by simply clicking on Remove device.
For Apple mobile phone after binding removal, you need to click on the symbol
on the right in Setting- Bluetooth, and choose to ignore the device. As shown
below:
Frequently Asked Questions (FAQs)
Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?
1> Lock background APP. When the Da Fit process is cleared, the smart bracelet will be disconnected from the mobile phone. 2 > Set APP self-startup 3 > Unrestricted background operation. The Android mobile phone installed with APP intelligently restricts the background operation by default, and App should be set manually without any restriction.
Why cannot the smart bracelet receive message push?
Why can't take a bath with the smart bracelet?
the smart watch is resistant to splashing water but is not waterproof
Warning:
Please consult your doctor before you take a new sport.
The smart bracelet should not be used for any medical purpose though it may
dynamically monitor the heart rate at real time.
Note: Do not expose the smart watch at extreme temperatures, the battery
could exploit.
Features
Exercise recording (step counting, distance, calories) / Exercise mode / Notifications (call, whatsapp, message…) / Heart rate monitoring / Sleep monitoring / Stopwatch / Camara control / Music control / Alarm / Screen 1.4 inches color / Full screen / touch / Valid for iOS and Android / Bluetooth 4.2 / Capacity battery: 170 mAh / Life time: about 5 days of use and about 25 days of standby / APP “Da Fit” / No waterproof / Bluetooth frequency band: 2.4 Ghz / Maximum emitted RF power < 100 mW
Customer Service
Only in English or Spanish
Servicio de atención al cliente / Customer Service
(Español / English): +34 91 713 94 98
Horario de atención al cliente: De lun. a Jue. de 08:00 a 14:00 y de 15:30 a
17:30 y los Vier. de 09:00 a 14:00
Working hours: Mon to Thu from 08:00 to 14:00 and from 15:30 to 17:30 and Fri.
from 09:00 to 14:00
sac@innovacelular.com
Declaration of conformity
Through this INNOVA CELLULAR, it declares that the INNOVA SMART WATCH FITNESS
BREEZE (SW/14 (P8)) complies with the essential requirements and any other
applicable or enforceable provisions of Directives 2014/53/UE (RED) and RoHS
2011/65/EU annex II amending annex (EU) 2015/863 and amending annex (EU)
2017/2102, of the European Parliament and of the Council, transposed to
Spanish legislation through Royal Decree 188/2016, of May 6, 2016. To see the
complete declaration of
conformity, you can access it through the following link:
http://www.innovacelular.com/images/web/descargas/descargas/declaracion/declaracion_sw-14.pdf
Guarantee
GUARANTEE
DEVICE
ITEM: ____
Serial number: ____
ESTABLISHMENT
Purchase date:
Establishment signature
+34 91 713 94 98
INNOVA CELULAR SL
C/ Severo Ochoa Nº 9 nave 8B
28521 Rivas-Vaciamadrid
Madrid
NOTE: The INNOVA SMART WATCH FITNESS BREEZE (SW/14 (P8)) has a two-year warranty from the date of purchase, except for parts with wear and tear, such as batteries, they have a 6-month warranty from the date of purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>