Innova Celular WT-11B Michigan Casual Watch User Manual
- May 15, 2024
- Innova Celular
Table of Contents
Innova Celular WT-11B Michigan Casual Watch
Specifications
- Digital watch / Works with a button battery / Date and Time / Light / Stopwatch / Alarm / Dial size: 3,2 cm Ø / Strap measurements: 23,5 cm
Indications
- Do not use it in the water or a wet environment, prevent water from entering the watch,
- Do not use it in extremely boiling or freezing environments.
- Avoid dropping it onto the ground or shaking it violently, as those might cause damage to the watch.
- Do not put it near gasoline, detergent, spraying agent, adhesion agent, oil paint, etc. The chemical actions of them might damage the sealing ring, the watch case and the surface of the watch.
- You can rinse the surface of the watch with a soft cloth and clean water but do not use chemicals.
- Do not rinse the painted patterns on your watch forcibly.
- Do not stretch the watchband too tightly around your wrist. The tightness is reasonable when your finger can be inserted in.
- Place the watch in a dry environment when unused.
- The coating of the watch may fade or scuff if it is under pressure long-term touch, abrasion or strong friction.
- The watchband is made of resin. So if you find any white powder on the watchband, wipe it off with a cloth.
- The powder does not cause any hurt to your skin or clothes. The watchband may age quickly, crack or break if it bears sweat or dampness.
- If there is any dirt or drips, wipe them off with a soft cloth as soon as possible.
- The watch contains precise electronic elements, do not open the cover by yourself. If there is any vapour or drips inside the watch case, please send it to the specialist to be disassembled and repaired.
- Keep well the operation instructions and the other attached files for future reference.
Standard display and button function
Operate and adjust the watch according to the full English wing indications on the screen.
SIGN INDICATION/BUTTON POSITION/ FUNCTION
- ALARM ON
- A IS MORNING TIME
- P PM AFTERNOON TIME COLD
- L-LIGHT NIGHT BUTTON
- (with3-second delay function)
- M-MODE FUNCTION SELECT BUTTON S-START
- S-START DIGIT CARRY BUTTON
- DATE DISPLAY BUTTON
- STOPWATCH TIMEKEEPING
- ON/OFF BUTTON
- R-RESET TIME ADJUST BUTTON
- ALARM TIME DISPLAY
- STOPWATCH RESET BUTTON
SIGN INDICATION/BUTTON
FUNCTION AND SPECIFICATION
- Standard display: hour, minute, second, month, date, week
- Cold light function
- Stopwatch stage timekeeping function
- Alarm function
- Service temperature: 5º C – 35º C
- Battery: 1.5V high-capacity alkaline Zn-Mn button battery
- Life of battery can supply power for 18 months approx under the following situations:
- 3 seconds of illumination every day
- 60 seconds of alarm every day
OPERATION
Press the “M” button, and the mode will change in turn as follows:
- M*: When operating in “Stopwatch Function Operation
- Mode” or “Alarm Time Adjust Mode”, if the “S” or “R” button was pressed before, pressing the “M” button can back to “Normal Time Display Mode” directly.
- In “Normal Time Display Mode”: press the “S” button to display the date; press the “R” button to display the alarm time.
- 12/24Time System Display: In “Normal Time Display
- Mode”, press “M” thrice to enter into “Time Adjust State”,
- Press the “R” button twice to alter into “Hour Adjust State’, then press the “S” button until the 12/24 Time System is displayed on the screen, and then press “M” once to back to “Normal Time
- Display Mode”.
- Time Adjusting: In “Normal Time Display Mode”, press “M” thrice to enter into “Time Adjust State”, the second value blinks, press “S” to adjust the second value; press the “R” button, and the minute value would blink, press “S” to adjust minute value; then press “R” and “S” respectively to adjust the hour value, date, month, and week; and then press “M” to back to normal mode.
- Alarm Time Setting: In”Normal Time Display Mode” ” press the “M” button twice, then press “S” to set the hour value; press “R” once, then press “S” again to set the minute value; press “M” to back to normal mode,
- How to use the stopwatch: In “Normal Time Display Mode” ” press the “M” button once to enter into “Stopwatch Function Operation Mode”, press the “S” button to start timekeeping, Press “S” again to stop timekeeping, the count value would display on the screen; Press the “R” button to reset, Press the “M” button to back to “Normal Time Display Mode”.
- How to on/off the Alarm and Hourly Chime function: hold the “R” button, then press “S” to on/off the Alarm Function: When “Alarm On”, the signal will display on the screen, and the alarm rings, press “S” to stop ringing, It will ring after 4-5 minutes, press “R” to stop again-ringing. Hold the “R” button, then press “M” to on/off the Hourly Chime Function.
- Cold Light Lamp: press the “L” button to turn on the cold light.
Note: long-term use of cold light would be power-consuming.
Declaration of conformity
Through this INNOVA CELLULAR, it declares that the RELOJ CASUAL MICHIGAN
(WT/11B) complies with the essential requirements and any other applicable or
enforceable provisions of Directives 2014/30/UE y RoHS 2011/65/EU Annex II
amending Annex (EU) 2015/863 and amending Annex (EU) 2017/2102. To see the
complete declaration of conformity, you can access it through the following
link:
http://www.innovacelular.com/images/web/descargas/descargas/declaracion/declaracion_wt11b.pdf
NOTE: The RELOJ CASUAL MICHIGAN (WT/11B)
It has a 3-year warranty from the date of purchase. Special importance in the
durability of the products has the elements that compose it and that suffer
from degradation and loss of capacity due to their use, being understood as
normal wear that they lose capacity, especially in the case of rechargeable
batteries, depending largely on the infinity of external factors (hours of
use, charge and discharge cycles, use of inappropriate chargers, temperatures
of use, not respecting the recommended charging times, etc…)
For the guarantee of wear and tear parts, it must be taken into account that the loss of autonomy of the battery as a result of its aging does not imply a manufacturing defect, so it is considered normal that after 6 months have a loss of 10%, at 15 months 20% – 30% at 24 months 45%, all corresponding to proper use of the battery and the charge and discharge cycles carried out. Any battery that presents symptoms other than those listed in this manual, will be inspected by the technical service and assessed for its affectation to guarantee.
If 24 months after its purchase, the battery presents symptoms different from those detailed, it will be understood to be exempt from guarantee for the reasons stated above and will be left out of the inspection process, becoming the customer who, if they so wish, must reliably demonstrate that the battery presented defects other than those detailed in this manual before those 24 months.
Warnings
Safety and handling: For more information on safety and handling, see the User
Manual.
Important Safety Information
Handle the watch with care. They contain sensitive components and can
malfunction, affect function, or cause damage if dropped, burned, punctured,
crushed, disassembled, or exposed to excessive heat, liquid, or environments
with high concentrations of industrial chemicals, including nearly evaporated
liquefied gases such as helium.
Do not use the watch if it is damaged. Avoid prolonged skin contact with the device. Choking hazard: The clock and the small parts included may present a choking hazard to small children or cause other injuries. Always keep them out of the reach of children. Skin irritations: The watch can cause skin irritation if not cleaned properly. Regularly clean the watch with a soft, lint-free cloth. In case of any type of skin reaction, stop using the watch. If the problem persists, see your doctor.
Important Driving Information
Discolouration of the watch after continued use is considered normal. Dirt,
debris, and exposure to moisture could cause discolouration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>