Vivo Y83 Smart Watch User Manual
- June 17, 2024
- Vivo
Table of Contents
Vivo Y83 Smart Watch
Specifications
- iOS compatibility: 8.0 or above
- Android compatibility: 4.4 or above
- Bluetooth version: 4.0
Product Usage Instructions
Setting Up
To set up the smartwatch, follow these steps:
- Download the H Band APP on your iOS or Android smartphone.
- iOS users: Download H Band from the App Store.
- Android users: Search for H Band in Google Play or other application markets.
- Pair your watch with your mobile phone by turning on Bluetooth and connecting it through the app.
Considerations when Connecting
When connecting your watch to the app, ensure the following:
- Bluetooth is turned on.
- The watch has a sufficient battery.
- Keep the watch within 50cm of the smartphone during the connection process.
- If the smartphone cannot find the watch, grant all permissions to the H Band software in the smartphone settings.
Function Introduction
The smartwatch offers various functions:
- Main Interface: Includes step counting, activity tracking, sleep monitoring, heart rate monitoring, blood pressure measurement, music control, information display, countdown, stopwatch, and remote control for blood glucose monitoring.
- Setup Interface: Customize the watch face by selecting a style through the app.
Screen Operation
You can navigate the watch screen by sliding up and down or left and right.
FAQ
Could not find the device while connecting?
- Ensure Bluetooth is enabled on your smartphone with Android 4.4+ or iOS 8.0+.
- Maintain a distance of less than 0.5 meters between the smartphone and the watch during connection.
- Make sure the watch has sufficient battery.
If issues persist after charging, contact customer support for further assistance.
Thank you for buying our smart watch. Please read this manual carefully before.
Setting
Use H Band APP on iOS or Android smartphones (excluding tablets and computers)
as follows.
Note : The hardware and system of your smartphones should meet the
following requirements.
Search and download H Band APP
- IOS users please search and download “H Band” from APP Store;
- Android users please search for “H Band” and download and install it in Google Play and 360 application markets, as well as the application markets provided by Huawei, Xiaomi, OPPO and Vivo. Scan the QR code. There may be problems opening the link with the smartphones scanning tool. Please copy the link and open it through the browser.
Watch and mobile phone binding connection
APP connect Y83:
Turn on the Bluetooth of the mobile phone, enter “Mine” in the APP page, find
“Device” and click on the name of the device to be connected “Y83”. Choose Y83
to connect, please choose to allow access to location information, if there
are multiple devices nearby, please filter according to the MAC address of the
watch, and the MAC address can be viewed in About Devices in the watch
settings function.
Tip : When the APP is linked to the watch, please open the Bluetooth
inside the phone settings, find Y83 inside the Bluetooth list and connect it
before the watch can make calls and use it as a speaker.
The symbol in the upper left corner is displayed as: If you see the symbol it means no connection succeeded, Please try again.
Considerations when connecting
- Bluetooth is turned on
- The watch has sufficient electricity
- When connecting smartphones and watches, please keep it within 50cm,lf the smartphones cannot find the watch in the APP please open all permissions of H Band software in the smartphone setting.
FAQ
Could not find the device while connecting?
- Make sure your smartphone’s Bluetooth is turned on, and your smartphone’s operating system should be Android 4.4 and above; or IOS 8.0 and above.
- Ensure that the distance between the smartphone and the device is less than 0.5 meters. After connection, the device should be kept within the effective range (usually less than 10 meters).
- Ensure that the device has sufficient power If there are still problems after charging, please feel free to contact us.
Appearance
Names of different parts
Note : To ensure the data is valid, please enter the real gender, height weight and skin color in APP’s personal data.
Function Introduction
Interface
Setup Interface
Make sure the watch and APP are connected well. Enter APP, click My Device-
Y83-Dial Setting-Select the corresponding style, and the watch screen shows
that the replacement was successful.
Screen Operation
- Slide up and down, left and right
- Screen drop-down interface function introduction
Swipe down the screen from the top of the screen and tap on the communication function. It is only by tapping the switch for Bluetooth audio that you can allow the sound of media audio to be played through the watch. If you do not want the sound of media audio to be played through the smartwatch, tap the switch for Bluetooth audio to turn this function off.
Turn on/off
- Turn on: when the device is off status, long press the key button for 4 seconds to turn it on and enter the time interface, After 5 seconds without operation, the device will turn off the screen automatically and enter the stand-by mode.
- Turn off: Long press the side button for 4 seconds and slide the screen to turn off the smartwatch.
Function interface
Press the side button to enter the function selection interface, slide up and down to select the desired function for operation, and then press the side button to return to the main interface.
Steps, calories, and miles
Enter the step counting screen, which displays the current step count, target progress, calories, and distance for the day. the screen will turn off after 5 seconds. The number of steps detected by the acceleration sensor has a small error (within 10%) within a reasonable range.
Manual detection and automatic monitoring of heart rate
Slide the right screen on the main interface of the device to enter the heart
rate detection interface and click the icon to start the detection. After the
measured results are obtained, the real-time heart rate value will be
continuously measured and displayed. No matter whether the results are
measured or not, the device will automatically extinguish the screen and stand
by after 60 seconds of cumulative testing. The heart rate measured on the
device will not be saved.you can also enter the heart rate manual test
interface on the APP’s data panel-Y83- More Operations-Heart Rate icon, and
the heart rate test results operated on the APP will not be saved. Turn on the
heart rate automatic detection switch at the APP end, and the device will
automatically monitor the heart rate 24 hours a day collect data every 10
minutes and display data every 30 minutes. After synchronizing the data, the
test results can be viewed on the APP for details.
- As long as you put on your watch, it will automatically detect your heart rate, number of steps and calories and synchronize to the APP
- The default is the automatic heart rate monitoring function, which automatically detects the heart rate to be turned off every 30 minutes. Please set it in APP: My Device-Y83- Switch Setting-Automatic Heart Rate Monitoring-Turn
- ln order to monitor the heart rate more accurately please make it tighter than usual during exercise.
Sport Mode
Press the side button briefly to enter the function selection interface and
select the sports mode. There are 20 sports modes in total. You can click to
select the exercise mode, and the data page will display running time,
exercise heart rate, running distance, calories, and step count in real-
time.
Exit sport mode
Swipe the screen to the left and tap the icon on the smartwatch to choose to
pause/continue and end the exercise
Data saving
If the exercise time is less than 1 minute, it will remind the user that the
data was not saved successfully.
Blood oxygen
Sliding to this page will automatically start measuring the current blood
oxygen and will prompt the result.
Blood pressure
Sliding to this page to stay, automatically enter the blood pressure
measurement, and vibration after prompting the measurement results data, can
be connected to the APP synchronization measurement or set the timer
measurement data
Heart rate alarm
- The watch will automatically detect the heart rate. If the data reaches a warning number or higher, the watch will automatically alert you.
- The default warning value for heart rate is 115, which you can reset according to your situation.
Sleep Monitoring
Go to the sleep monitoring screen, which shows the total sleep time of the
previous day. This function will run automatically. Generally, you can know
the data 10-30 minutes after waking up.
Information Alerts
Open APP-Settings-MyDevice -MessageReminder Turn on or off the reminder
function. If you want to show the message, please set it in the corresponding
APP
Countdown
Press the key on the watch for a short time to select the timer function.
After setting the time and pressing “Start”, the countdown time will be
displayed. At the end of the countdown, it will vibrate and remind. Swipe the
screen to the right to exit the countdown.
Music
After the APP is successfully connected to the watch, click the music option
in the function interface to play the music from your smartphone.
Find a Smartphone
Keep “H Band” running in the background of your smartphone. Tap the “Find
Smartphone” option in the function screen, and the smartphone connected to the
watch will ring. Take care to keep the smartphone in ringing mode.
Weather
Display the current city weather conditions. This function needs to be
connected to the sync app to work properly. It requires the phone to have GPS
on and the APP to have access to the location permission function and network
connection.
Stopwatch
Press the watch key briefly to select the stopwatch function, tap the touch
key to start running seconds once, then press pause, then press continue, and
so on, and slide the screen to the right to exit running seconds.
Note : After entering the stopwatch interface, the device will
temporarily block all reminders that require and push work to occupy the
screen. The maximum time value of the stopwatch is 99 minutes and 59 seconds.
Remote control of smartphone cameras
Connect the watch and open the APP, click “Y83”-Photo, open the camera of
your smartphone, select Photo in the watch function option, click the photo
icon or shake to take a photo
Call Reminder
After setting the incoming call alert, the watch will keep vibrating when
someone calls. You can mute the call by short pressing the touch button, and
reject the call by pressing and holding the touch button. When the call is
answered you can set whether the watch answers or the phone answers the
call.
Female Physiological Period
The female function is only available for female users. Only when the app
user’s gender is set to female, data will be recorded in the female function
option. Currently, it supports recording menstruation period, pregnancy
preparation period, pregnancy period and baby mama period. You can choose to
record according to your specific situation, click into it and fill in your
basic information.
Alarm Clock
In the app, you can set the alarm clock by selecting the icon on the right.
The maximum number of alarms is 10.
Frequently Asked Questions
Q: How to deal with upgrade failure?
A: If the initial upgrade fails, please reconnect the device on the APP, and
the system will automatically remind you to upgrade.
Q: Why is the heart rate (sleep) test not allowed?
A: First of all, a watch device monitors human activities through electronic
sensors. It is normal for consumer products to have certain errors. Please
treat the data objectively.
Q: Where do I set APP permissions?
A: Android Phone-Setting-Rights Management-Find “H Band” Application-Setting
Trust This Software
- If the smartphones are equipped with security management or cleaning acceleration applications, please set “H Band” as a white list (trust list);
- In the rights management program of the smartphone system, please set “H Band” as a trust application. Caller ID and other functions need to obtain rights to realize the functions.
Q: How to set the time display mode?
A: The device synchronizes the time display mode of the smartphones. If the
smartphones are set to a 12-hour system, the device will be displayed to a
12-hour system.
Q: How do I reset the password?
A: Change the password in APP My-Y83-Reset Password. The user can enter the
old password and the new password and save it at a single point. The initial
password is 0000. When the device is connected again, the user can connect the
device by entering a new password. If you forget the password, press it for 6
seconds in the watch sleep interface until the watch vibrates to clear the
password. When the APP terminal connects the device again, it can connect
directly. When it is set again, the old password is the initial password.
About Waterproofing
The waterproof grade of the watch is IP68, which means that dust can be prevented from inhaling; Preventing short-term soaking The allowed activity scenes in the activity area are as follows: wearing, washing face and hands in rainy days
Product Parameters
This device is not a medical device, and the data and information provided are for reference only
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, according to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used by the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>