V I V O DESK-SHELF30-UB Black 30 Inch Under Desk Shelf Instruction Manual
- June 17, 2024
- V I V O
Table of Contents
V I V O DESK-SHELF30-UB Black 30 Inch Under Desk Shelf
Product Information
Specifications
- Product Name: Black 30 Under Desk Shelf
- SKU: DESK-SHELF30-UB
- Weight Capacity: 44lbs (20kg)
Package Contents
- (x2) Mounting Bracket (A)
- (x1) Left Base Panel (B)
- (x1) Right Base Panel (C)
- (x1) Left Back Panel (D)
- (x1) Right Back Panel (E)
- (x1) Connecting Bar (F)
- (x1) Connecting Bracket (G)
- (x4) Wooden Dowel Pin (S-A)
- (x4) ST4.2x13mm Screw (S-B)
- (x14) ST4.2x20mm Screw (S-C)
- (x6) ST4.2x25mm Screw (S-D)
- (x6) ST4.2x50mm Screw (S-E)
- (x6) Spacer (S-F)
Product Usage Instructions
Step 1: Assembling Base Panels and Back Panels
-
Join the Left and Right Base Panels (B, C) together using the Wooden Dowel Pins (S-A).
-
Join the Left and Right Back Panels (D, E) together using the Wooden Dowel Pins (S-A).
Refer to the diagram:
Step 2: Securing Base Panels -
Secure the Left and Right Base Panels (C, B) together using the Connecting Bar (F) and ST4.2x20mm Screws (S-C). Tighten with a Phillips screwdriver.
Refer to the diagram:
Step 3: Joining Base Panels and Back Panels -
Join the Base Panels (B, C) and Back Panels (D, E) together using the Connecting Bracket (G) and ST4.2x13mm Screws (S-B). Tighten with a Phillips screwdriver. Note: The holes along the center of the bracket should not be used.
Refer to the diagram:
Step 4: Securing Mounting Brackets -
Continue to secure the Base Panels (B, C) and Back Panels (D,E) together using ST4.2x20mm Screws (S-C) and a Phillips screwdriver.
-
Attach the Mounting Brackets (A) to the Base Panels (B, C) and Back Panels (D, E) using ST4.2x20mm Screws (S-C). Tighten with a Phillips screwdriver.
Refer to the diagram:
Step 5 (Option A): Installing Mounting Brackets Directly to Desktop -
Hold the shelf assembly up to your desired mounting location and mark hole locations using a pencil.
-
Pre-drill the marked locations using a 3/32 (2.5mm) drill bit, drilling 5/8 (15mm) deep.
-
Attach the Mounting Brackets (A) to the desktop using ST4.2x25mm Screws (S-D) and a Phillips screwdriver.
Refer to the diagram:
Step 5 (Option B): Spacing Mounting Brackets off Desktop -
Hold the shelf assembly up to your desired mounting location and mark hole locations using a pencil.
-
Pre-drill the marked locations using a 3/32 (2.5mm) drill bit, drilling 5/8 (15mm) deep.
-
Attach the Mounting Brackets (A) to the desktop using ST4.2x50mm Screws (S-E), Spacers (S-F), and a Phillips screwdriver.
Refer to the diagram:
FAQ
-
Q: What is the weight capacity of the Black 30 Under Desk Shelf?
A: The weight capacity of the shelf is 44 lbs (20kg). It is important not to exceed this weight limit to avoid any potential damage or injuries. -
Q: Are there any small parts or choking hazards in this product?
A: Yes, there are small parts included in the package. This product is not suitable for children under 3 years old and adult supervision is required. -
Q: What tools are needed for assembly?
A: You will need a Phillips screwdriver and a drill for assembly.
Contact Information
For further assistance or inquiries, you can reach our support team:
- Email: help@vivo-us.com
- Phone: 309-278-5303 (Monday-Friday from 7:00 am-7:00 pm CST)
- Website: www.vivo-us.com
- Live Chat: Chat live with an agent on our website during office hours.
Share Your VIVO Setup!
If you love your new VIVO setup and want to share it, tag us in your photo
on social media! Find us at @vivo_us.
Last Updated: 09/05/2023 REV1
Open Monday – Friday 7:00 am – 7:00 pm CST, our dedicated support team can
offer immediate assistance with rapid response times. If any parts are
received damaged or defective, please contact us. We are happy to replace
parts to ensure you have a fully functioning product.
Average Resolution Time (within office hours): 5 minutes 4 seconds
Average Resolution Time (within office hours) for live chat: less than 15
minutes
SKU: DESK-SHELF30-UB
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-shelf30-ub
GET IN TOUCH | Monday-Friday from 7:00 am-7:00 pm CSThelp@vivo-
us.com
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PACKAGE CONTENTS
NOTE : SOME HARDWARE INCLUDED MAY NOT BE USED
ASSEMBLY STEPS
STEP 1
Join Left and Right Base Panels (B,C) together using Wooden Dowel Pins
(S-A). Join Left and Right Back Panels (D,E) using Wooden Dowel Pins (S-A).
STEP 2
Secure Left and Right Base Panels (C,B) together using Connecting Bar (F)
and ST4.2x20mm Screws (S-C). Tighten with a Phillips screwdriver. STEP 3
Join Base Panels (B,C) and Back Panels (D,E) together using Connecting Bracket
(G) and ST4.2x13mm Screws (S-B). Tighten with a Phillips screwdriver.
Note : The holes along the center of the bracket should not be used.
STEP 4
Continue to secure Base Panels (B,C) and Back Panels (D,E) together using
ST4.2x20mm Screws (S-C) and a Phillips screwdriver. Attach Mounting Brackets
(A) to Base Panels (B,C) and Back Panels (D, E) using ST4.2x20mm Screws (S-C).
Tighten with a Phillips screwdriver.
STEP 5 (Option A)
Installing mounting brackets directly to the desktop.
Hold the shelf assembly up to your desired mounting location and mark hole
locations using a pencil. Pre-drill marked locations using a 3/32” (2.5mm)
drill bit drilling 5/8” (15mm) deep. Attach Mounting Brackets (A) to the
desktop using ST4.2x25mm Screws (S-D) and a Phillips screwdriver.
STEP 5 (Option B)
Spacing mounting brackets off the desktop to help clear possible
obstructions.
Hold the shelf assembly up to your desired mounting location and mark hole
locations using a pencil. Pre-drill marked locations using a 3/32” (2.5mm)
drill bit drilling 5/8” (15mm) deep. Attach Mounting Brackets (A) to desktop
using ST4.2x50mm Screws (S-E), Spacers (S-F), and a Phillips screwdriver.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00 am – 7:00 pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303 AVG. RESOLUTION TIME
(within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Black 30" Under Desk Shelf – VIVO - desk solutions, screen mounting, and more