nedis HTCO50WTW Wi-Fi Smart Convection Heater User Guide

nedis HTCO50WTW Wi-Fi Smart Convection Heater

Product Information

Specifications

Type of heat input, for electric storage local space heaters
only (select one)| kW manual heat charge control, with integrated thermostat| No
Minimum heat output| Pmin (indicative)| 0.75| kW
Type of heat input, for electric storage local space heaters
only (select one)| kW manual heat charge control with room and/or outdoor
temperature feedback| No
Maximum continuous heat output| Pmax, c| 2.0| kW
Auxiliary electricity consumption| At nominal heat output| elmax| 2.0| kW
Auxiliary electricity consumption| At minimum heat output| elmin| 0.75| kW
Type of heat input, for electric storage local space heaters
only (select one)| kW electronic heat charge control with room and/or outdoor
temperature feedback| No
Type of heat output/room temperature control (select one)| kW single-stage heat output and no room temperature
control| No
In standby mode| elSB| 0.000| kW
Type of heat output/room temperature control (select one)| kW two or more manual stages, no room temperature control| No
Other control options (multiple selections possible)| room temperature control, with presence detection| No
Other control options (multiple selections possible)| room temperature control, with open window detection| No
Other control options (multiple selections possible)| with a remote control option| Yes
Other control options (multiple selections possible)| with adaptive start control| No
Other control options (multiple selections possible)| with working time limitation| Yes
Other control options (multiple selections possible)| with a black bulb sensor| Yes

Product Usage Instructions

Intended use
The Wi-Fi Smart Convection Heater is designed for heating spaces and comes with an LCD and a remote control. It is suitable for use in residential or commercial settings.

Main parts

1. Handle
2. Display
3. Button mode
4. WiFi indicator LED
5. Wi-Fi button
6. Receiver
7. On/standby button
8. Transmit
9. Fan button
10. Temperature up button
11. Temperature down button
12. Timer button
13. On/off switch
14. Power cable
15. Screw
16. Football

Safety instructions
To ensure safe use of the product, please follow these instructions:

• Do not cover the product to avoid overheating.
• Keep the product away from flammable materials.
• Do not touch the product with wet hands.
• Unplug the product when not in use or during maintenance.

Installing the feet

1. Place the product upside down.
2. Place the feet on the product.
3. Align the holes in the feet with the holes in the bottom of the product.
4. Attach the feet to the product with the screws using a screwdriver.
5. Place the product upright.

Insert or change the battery

1. Open the battery compartment.
2. Place the battery inside.
3. Close the battery compartment.

Installing the Nedis SmartLife app

1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your email address and tap Continue.
4. You will receive a verification code on your email address.
5. Enter the received verification code.
6. Create a password and tap Done.
7. Tap Add Home to create a SmartLife Home.
8. Set your location and choose the rooms you want to connect with.

FAQs

• Q: How do I control the temperature of the heater?
  A: Use the temperature up and down buttons on the heater or the Nedis SmartLife app to adjust the temperature.

• Q: Can I use the heater without connecting it to Wi-Fi?
  A: Yes, the heater can be used without Wi-Fi connectivity. However, certain features may require a Wi-Fi connection.

• Q: How do I set the timer on the heater?
  A: Press the timer button on the heater or use the timer function in the Nedis SmartLife app to set the desired timer settings.

• Q: Is it safe to leave the heater unattended?
  A: It is recommended to never leave the heater unattended. Always ensure someone is present when the heater is in use.

ned.is/htco50wtw

Specifications

Model identifier(s): HTCO50QWTW

Item| Symbol| Value| Unit| Item| Unit
Heat output| Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output| Pnom| 2.0| kW| manual heat charge control, with integrated thermostat| No
Minimum heat output (indicative)| Pmin| 0.75| kW| Manual heat charge control with room and/ or outdoor temperature feedback| No
Maximum continuous heat output| Pmax, c| 2.0| kW| electronic heat charge control with room and/or outdoor temperature feedback| No
Auxiliary electricity consumption| fan-assisted heat output| No
At nominal heat output| elmax| 2.0| kW| Type of heat output/room temperature control (select one)
At minimum heat output| elmin| 0.75| kW| single-stage heat output and no room temperature control| No
In standby mode| elSB| 0.000| kW| two or more manual stages, no room temperature control| No
with mechanic thermostat room temperature control| No
with electronic room temperature control| Yes
electronic room temperature control plus a day timer| No
electronic room temperature control plus week timer| No
Other control options (multiple selections possible)
room temperature control, with presence detection| No
room temperature control, with open window detection| No
with a distance control option| Yes
with adaptive start control| No
with working time limitation| Yes
with a black bulb sensor| Yes
Contact details| Nedis BV, De Tweeling 28, 5215 MC ’s-Hertogenbosch, The Netherlands

Wi-FI Smart Convection Heater
For more information see the extended manual online: ned.is/htco50wtw.

Intended use

• This product is a heater that allows the user to control the surrounding temperature.
• This product can be controlled via the Nedis SmartLife app, the buttons on the product or with the included remote control.
• This product is only suitable for well-insulated spaces or occasional use.
• The product is intended for indoor use only.
• The product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as shops, offices other similar working environments, farmhouses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.
• This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety.
• Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts

Main parts (image A)

1. Handle
2. Display
3. Mode button
4. Wi-Fi indicator LED
5. Wi-Fi button
6. Receiver
7. On/standby button
8. Transmitter
9. Fan button
10. Temperature up button
11. Temperature down button
12. Timer button
13. On/off switch
14. Power cable
15. Screw
16. Foot

Safety instructions

To avoid overheating, do not cover the product.

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Do not drop the product and avoid bumping.
• Always keep button cell batteries, both full and empty, out of reach of children to avoid the chance of swallowing. Dispose of used batteries immediately and safely. Button cell batteries can cause serious internal chemical burns in as little as two hours when swallowed. Keep in mind that the first symptoms may look like child diseases like coughing or drooling. Seek immediate medical attention when you suspect that batteries have been swallowed.
• Wipe the battery terminals with a clean dry cloth if they are dirty.
• Non-rechargeable batteries are not to be recharged.
• Do not short-circuit a battery.
• Do not subject cells or batteries to mechanical shock.
• Do not dismantle, open or shred batteries.
• Do not remove a cell or battery from the original packaging until required for use.
• Do not use any cell or battery that is not designed for use with the product.
• Battery usage by children should be supervised.
• Observe the plus (+) and minus (–) marks on the cell or battery and product and ensure correct use.
• Seek medical advice immediately if a cell or battery has been swallowed.
• Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
• Properly dispose of empty cells or batteries.
• Do not expose the product to water or moisture.
• Do not use this product in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision is provided.
• Do not use this product in the immediate surroundings of a bath, a shower or a swimming pool.
• Only handle the product with dry hands. Handling with wet hands might cause an electric shock.
• Do not use the product in rooms where flammable liquids or gases are used or stored.
• The heat of the product may cause damage to the surface the product is placed on. Always place the product on a flat, stable and heat-resistant surface to prevent damage to the surroundings of the product.
• Do not locate the product immediately below a power outlet.
• Only plug the power cable into a wall outlet. Do not use extension cables.
• Do not plug the product in a power outlet of a power group with other products that consume a lot of power.
• Always check that the voltage of the product corresponds to the mains voltage.
• Only use the product in the upright position.
• Always unwind the power cable before using the product.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• The power cable cannot be replaced. If the cable is damaged the product should be scrapped.
• Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
• Unplug the product from the power source and other equipment if problems occur.
• Unplug the product when not in use and before cleaning.
• Do not use external timers or remote control systems to switch the product on or off.
• Do not use accessories that are not recommended or sold by the manufacturer.
• To avoid overheating, do not cover the product. Keep a distance of at least 1 meter from textiles, curtains, tent cloths and other flammable objects to reduce the risk of a fire.
• The surfaces of the product get hot during use. Only touch the display and handles of the product to avoid burns.
• Only use the product as described in this document.
• Children should be supervised to ensure that they do not play with the product.
• Before cleaning and maintenance, switch off the product and disconnect the power. Let the product cool down completely.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Do not open the product, there are no user-serviceable parts inside.

Installing the feet

Installing the feet (image B)

1. Place the product upside down.
2. Place the feet A16 on the product.
3. Align the holes in the feet with the holes in the bottom of the product.
4. Attach the feet to the product with the screws A15 using a screwdriver.
5. Place the product upright.

Insert or change the battery

Insert or change battery (image C)

1. Open the battery compartment.
2. Place the battery
3. Close the battery compartment.

Installing the Nedis SmartLife app

1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap Continue.
   • You will receive a verification code on your e-mail address.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.

Adding a product to the Nedis SmartLife app

1. Press the on/off switch A13 to switch on the product.
2. Press the on/standby button A7 to switch between standby and on.
3. Press and hold the Wi-Fi button A5 for 3 seconds.
   • The Wi-Fi indicator LED A4 blinks fast and a beep sounds to indicate pairing mode is active.
4. Tap + in the Nedis SmartLife app.
5. Select the product type you want to add from the list.
6. Follow the instructions in the Nedis SmartLife app.
7. After confirming you can control the product with your smartphone.

To connect your SmartLife account to Amazon Alexa and/or Google Home, set it up using the “Smart Life” action or skill. For more details check the instructions on either Amazon or Google.

• The Wi-Fi indicator LED A4 lights up when the product is connected.

Switching on the product
Do not use the product without the feet attached.

• See “Installing the feet” for instructions on how to attach the feet.

1. Plug the power cable A14 into a power outlet.

2. Press the on/off switch A13 to switch on the product.
   The product is now in standby mode.

   • You hear a click when you switch on the product.

3. Press the on/standby button A7 to switch between standby and on.

   • When the product is switched on (after a long period), the product may emit some smell and fumes.

Display

Display (image D)

The display A2 contains the following:

1. Power setting
2. Fan mode
3. Anti-frost mode
4. Current room temperature
5. Temperature unit
6. Countdown timer
7. Set room temperature

Switching between power settings

1. Press the mode button A3 to switch between power settings.
2. Choose between:
   • 750 W
   • 1250 W
   • 2000 W
   • Anti-frost mode
   • The power setting D1 shows the current heating level.

Anti-frost mode

• When the product is set to anti-frost mode, the product switches on when the room temperature reaches below 5°C to avoid freezing temperatures.
• If the room temperature reaches 9°C, the product switches back to standby.
  • When anti-frost mode is activated, the anti-frost mode icon D3 is visible on the display A2.

Settings

Setting the timer

1. Press the timer button A12 to set a countdown timer.
2. Press the timer button A12 to increase the timer with 1 hour.
   • The maximum countdown time is 24 hours.
3. Switch off the timer by pressing the timer button A12 once more when the time is set to maximum.
   • The timer is cancelled when the product is switched off.
   • The time starts counting down 5 seconds after you set the timer.
   • The product switches back to standby mode when the selected time has expired.

Setting the temperature

1. Press the temperature up and down buttons A10, 11 w to adjust the set room temperature.

Switching the fan on/off

1. Press the fan button A9 to switch the fan on/off. The fan mode indicator D2 appears on the display A2 to indicate the fan mode is activated.

Switching off the product

1. Press the on/standby button A7 to switch the product to standby mode.
2. Press the on/off switch A13 to switch off the product.
   • The Wi-Fi switches off.
3. Unplug the power cable A14 from the power outlet.

Disposal

• The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
• For more information, contact the retailer or the local authority responsible for the waste management.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HTCO50WTW from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/HTCO50WTW#support.

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch The Netherlands.

References

• SmartLife Convection Heater | Wi-Fi | 2000 W | 3 Heat Settings | LCD | 5 - 37 °C | Adjustable thermostat | White
• SmartLife Convection Heater | Wi-Fi | 2000 W | 3 Heat Settings | LCD | 5 - 37 °C | Adjustable thermostat | White
• SmartLife Konvekční Horkovzdušný Ventilátor | Wi-Fi | 2000 W | 3 Nastavení Teploty | LCD | 5 - 37 °C | Nastavitelný termostat | Bílá
• SmartLife Konvektionsheizgeräte | Wi-Fi | 2000 W | 3 Wärmeeinstellungen | LCD | 5 - 37 °C | Verstellbares Thermostat | Weiss
• SmartLife Elradiator | Wi-Fi | 2000 W | 3 Varmeindstillinger | LCD | 5 - 37 °C | Justerbar termostat | Hvid
• SmartLife Calentador de Convección | Wi-Fi | 2000 W | 3 Configuraciones de Calor | LCD | 5 - 37 °C | Termostato ajustable | Blanco
• SmartLife Radiateur à convection | Wi-Fi | 2000 W | 3 Réglages de Chaleur | LCD | 5 - 37 °C | Thermostat réglable | Blanc
• SmartLife Riscaldamento a Convezione | Wi-Fi | 2000 W | 3 Impostazioni di Calore | LCD | 5 - 37 °C | Termostato regolabile | Bianco
• SmartLife Convectorkachel | Wi-Fi | 2000 W | 3 Warmte Standen | LCD | 5 - 37 °C | Instelbare thermostaat | Wit
• Strona domeny nedis.pl
• SmartLife Convection Heater | Wi-Fi | 2000 W | 3 Heat Settings | LCD | 5 - 37 °C | Adjustable thermostat | White
• SmartLife Konvektion Värmare | Wi-Fi | 2000 W | 3 Värmeinställningar | LCD | 5 - 37 °C | Justerbar termostat | Vit
• SmartLife Convection Heater | Wi-Fi | 2000 W | 3 Heat Settings | LCD | 5 - 37 °C | Adjustable thermostat | White

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>