XPOWER BR-430 Vertical Advertisement Blower Owner’s Manual
- June 17, 2024
- XPOWER
Table of Contents
OWNER’S MANUAL VERTICAL ADVERTISEMENT BLOWER
BR-430, BR-450, BR-460,
BR-430L, BR-450L, BR-460L
PLEASE READ AND SAVE THESE INSTRUCTIONS
Introduction
XPOWER BR-430(L), BR-450(L) and BR-460(L) series blowers are designed for
vertical advertisement inflatables. The model BR-460(L) is ETL/CETL certified.
Features:
- Low power draw with an high velocity air flow up to 5800 CFM
- Super compact and lightweight motor design
- Easy carry with 2 built-in handles
- Power cord lengths are 15’ for 430 and 450 models, and 25’ for 460 models
- Easy Cord wrap
- 4 lockable wheels on a unitary roller base for 450 and 460 models
- 2-speed switch for 450 and 460 models.
- Durable and rugged housing with 1 year warranty
- The Models with “L” provide sleeve advertising illumination with energy-saving LED lights
- Outtake attached with Velcro (male) strap
- Nylon pull cord for mobility for 450 and 460 models
Operation/Instructions
XPOWER Vertical Advertisement Blowers are used to inflate advertising sleeve units. Durable and easy to operate with an effective balance of static pressure and airflow. The units are suitable for a variety of advertising applications with or without high intensity, internal sleeve illumination.
- XPOWER Vertical Advertisement Blowers are shipped ready-to-use. Before plugging the unit into the power source, inspect completely for any shipping damage.
- A support rod (SDSK) is designed to stabilize the vertical inflatable advertisement. Especially for large inflatable, the SDSK can help to balance inflatable. See page 9 for assembly.
- Snugly attach the inflatable advertisement around the Velcro strap on the blower housing.
- Carefully place the blower unit on a stable, flat dry surface. Lock the wheels to secure the unit for 450 and 460 models.
- Plug power cord into a grounded GFCI outlet.
- Turn the switch to desired speed and make sure unit operates normally.
- Close supervision is necessary when the unit is used near children. Do not allow children to play with or around the unit.
Safety Instructions
WARNING: IMPORTANT SAFETY PRECAUTIONS! PLEASE READ COMPLETELY BEFORE
USING PRODUCT!
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and personal injury,
including, but not limited to the following:
- To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water.
- To avoid risk of injury, do not direct air flow at face or body.
- Avoid sands, small rocks and other small objects being sucked into the Blower.
- To reduce the risk of fire or electric shock, do not use unit with any solid-state speed control device.
- While the Blower is used outdoors, use only with GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.
- Indoor use: To reduce the risk of electric shock, do not expose to water. Use only with grounded plug.
- Do not operate any Advertising Inflatable Blower with a damaged cord or plug. If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person.
- Unplug the Advertising Inflatable Blower from the power supply before servicing or cleaning.
- This product is not a toy and should only be used for its intended purpose. To reduce the risk of injury, close supervision is necessary when the unit is used near children . Do not allow children to play with or around the unit.
- Do not move or carry the Advertising Inflatable Blower while unit is operating.
Maintenance Instructions
- To keep the unit clean, use a damp cloth to wipe the surface of the housing.
- Never clean the Advertising Inflatable Blower with water.
- When not in use, unplug and store the Advertising Inflatable Blower in a dry indoor place.
- Always disconnect the Advertising Inflatable Blower from its power source before performing any maintenance or cleaning.
Troubleshooting
For any problems not listed below, call your local distributor or contact our Service Department.
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor Not Running | a) Switch is OFF | Turn switch ON |
| b) Faulty switch/cord | Replace switch or cord | |
| Scraping Noise From Inflatable Blower | a) Check for obstruction entering | |
| through the intake or exhaust | Remove obstruction | |
| b) Check for any pressure against blower housing | Remove any pressure | |
| Weak Air Flow | a) Obstructed vents/inlets | Clean out vents/inlets |
Specifications
Model| BR-430| BR-430L| BR-450| BR-450L| BR-460|
BR-460L
---|---|---|---|---|---|---
Volt / Frequency| 115 V / 60 Hz
Housing| PP / Injection Mold
Overheating Protection| Dual Thermally Protected
Power| 1/3 HP| 1 HP
Amp| 4.2 Amps| 8.3 Amps
Rated Airflow| 2800 CFM| 5800 CFM
Speeds| One| Two
Pull Strap & Wheels| N/A| Incl.
SDSK| 41.7 (3 x 13.9) inch| 59.1 (3 x 19.7) inch
Cord Length| 15 Ft.| 25 Ft.
Safety Certificates| N/A| ETL / C-ETL
LED Lights| N/A| Incl.| N/A| Incl.| N/A| Incl.
Weight (unit/package)| 15/17.1 Lbs| 16.3/18.4 Lbs| 29/32.2 Lbs|
30.6/34.1 Lbs| 32.2/36.8 Lbs| 34/38.4 Lbs
Size (H x W x D) inch| 14.8×14.8×13.1| 14.8×14.8×16.2| 19×19.7×17.7|
19×19.7×19.1| 19×19.7×17.7| 19×19.7×19.1
XPOWER Limited Warranty (USA)
XPOWER’s Limited Warranty covers the unit (excludes POWER CORD) from defects
in material and craftsmanship. The Warranty covers normal use for a term of
one year from the original date of purchase including parts, labor, and one
way shipping. Non-contiguous states must pay for roundtrip freight. A purchase
receipt must be provided.
Important!
This warranty does not cover or apply to defects due directly or indirectly to
misuse, abuse, disassembly, alteration, corrosive chemicals, improper voltage,
fire, flood, negligence, accident, improperly or incorrectly performed
maintenance or repair, or failure to perform necessary maintenance or repair,
or if the use of this product is not in compliance with the instructions and
specifications for its use
Service
For Warranty service and parts replacement (US users only), you must:
A. Call 1-855-855-8868 for a RMA
(Return-Merchandise-Authorization) number.
B. Have original proof of purchase.
C. Use the original undamaged packaging or an industrial certified packaging
method.
End user will be responsible for shipping the unit (with RMA Number showing on
the shipping label) to the XPOWER Service Department. XPOWER will inspect,
assess and advise the repairs needed and the applicable cost, if any.
For users outside the US, please contact an XPOWER Distributor in your country
or region for Warranty service and parts replacement.
Parts List
| Item No. | Parts Name |
|---|---|
| 1 | Upper cover |
| 2 | LED light (“L” model) |
| 3 | Fan |
| 4 | Housing |
| 5 | Power cord |
| 6 | Switch plate |
| 7 | LED switch (“L” model) |
| 8 | Speed switch |
| 9 | Velcro strap (male) |
| 10 | Motor |
| 11 | Capacitor |
| 12 | Base |
| 13 | Wheels |
| 14 | Support Rod (SDSK) |
** Actual parts are not limited on this
list, contact XPOWER for ordering parts.
Accessories
SDSK (Support Rod for Vertical Advertisement Blower)
A Support Rod (SDSK) is included with unit to stabilize the vertical
advertising inflatable. The support rod use is optional. However, it is
strongly recommended to use the SDSK for large and tall advertising
inflatable. The support rod improves vertical stability and prevents complete
inflatable collapse.
Assembling:
Connect 3 pieces of 1.6’ short rods one by one with bushings to complete
assembly of SDSK rod. Insert rod bottom (non-cap) into provided hole on the
upper cover and position sleeve over rod before securing the advertising
sleeve. 
Warranty Registration
For your product warranty, please complete and mail / fax this form to XPOWER
MANUFACTURE, INC.
Address: 668 S. 6th Ave., City of Industry, CA 91746, USA Tel:
626-285-3301 Fax:
626-285-3302 (for US user only)
(For your convenience, register your product online at
xpower.com)
Company Name / Contact Person/Title…………………….
Address…………….. City…………………..
State / Province…………………… Zip………………
Country……………
Phone………… Fax…………… E-mail…………
Model#…………..
Serial#……………
Date of Purchase…………..Purrcased From………..
Additional Comments / Suggestions………………
To:
XPOWER Manufacture, Inc.
668 S. 6th Ave.,
City of Industry, CA 91746, USA
Tel: 626-285-3301, Fax:
626-285-3302
OWNER’S MANUAL
Introductions
XPOWER BR-430(L), BR-450(L) and BR-460(L) series blowers are designed for
vertical advertisement inflatables. The model BR-460(L) is ETL/CETL certified.
Features:
- Low power draw with an high velocity air flow up to 5800 CFM
- Super compact and lightweight motor design
- Easy carry with 2 built-in handles
- Power cord lengths are 15’ for 430 and 450 models, and 25’ for 460 models
- Easy Cord wrap
- 4 lockable wheels on a unitary roller base for 450 and 460 models
- 2-speed switch for 450 and 460 models.
- Durable and rugged housing with 1 year warranty
- The Models with “L” provide sleeve advertising illumination with energy-saving LED lights
- Outtake attached with Velcro (male) strap
- Nylon pull cord for mobility for 450 and 460 models
Operation / Instructions
XPOWER Vertical Advertisement Blowers are used to inflate advertising
sleeve units. Durable and easy to operate with an effective balance of static
pressure and airflow. The units are suitable for a variety of advertising
applications with or without high intensity, internal sleeve illumination.
- XPOWER Vertical Advertisement Blowers are shipped ready-to-use. Before plugging the unit into the power source, inspect completely for any shipping damage.
- A support rod (SDSK) is designed to stabilize the vertical inflatable advertisement. Especially for large inflatable, the SDSK can help to balance inflatable. See page 9 for assembly.
- Snugly attach the inflatable advertisement around the Velcro strap on the blower housing.
- Carefully place the blower unit on a stable, flat dry surface. Lock the wheels to secure the unit for 450 and 460 models.
- Plug power cord into a grounded GFCI outlet.
- Turn the switch to desired speed and make sure unit operates normally.
- Close supervision is necessary when the unit is used near children. Do not allow children to play with or around the unit.
Safety Instructions
WARNING: IMPORTANT SAFETY PRECAUTIONS! PLEASE READ COMPLETELY BEFORE
USING PRODUCT!
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and personal injury,
including, but not limited to the following:
- To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water.
- To avoid risk of injury, do not direct air flow at face or body.
- Avoid sands, small rocks and other small objects being sucked into the Blower.
- To reduce the risk of fire or electric shock, do not use unit with any solid-state speed control device.
- While the Blower is used outdoors, use only with GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.
- Indoor use: To reduce the risk of electric shock, do not expose to water. Use only with grounded plug.
- Do not operate any Advertising Inflatable Blower with a damaged cord or plug. If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person.
- Unplug the Advertising Inflatable Blower from the power supply before servicing or cleaning.
- This product is not a toy and should only be used for its intended purpose. To reduce the risk of injury, close supervision is necessary when the unit is used near children . Do not allow children to play with or around the unit.
- Do not move or carry the Advertising Inflatable Blower while unit is operating.
Specifications
Model| BR-430| BR-430L| BR-450| BR-450L| BR-460|
BR-460L
---|---|---|---|---|---|---
Volt / Frequency| 115 V / 60 Hz
Housing| PP / Injection Mold
Overheating Protection| Dual Thermally Protected
Power| 1/3 HP| 1 HP
Amp| 4.2 Amps| 8.3 Amps
Rated Airflow| 2800 CFM| 5800 CFM
Speeds| One| Two
Pull Strap & Wheels| N/A| Incl.
SDSK| 41.7 (3 x 13.9) inch| 59.1 (3 x 19.7) inch
Cord Length| 15 Ft.| 25 Ft.
Safety Certificates| N/A| ETL / C-ETL
LED Lights| N/A| Incl.| N/A| Incl.| N/A| Incl.
Weight (unit/package)| 15/17.1 Lbs| 16.3/18.4 Lbs| 29/32.2 Lbs|
30.6/34.1 Lbs| 32.2/36.8 Lbs| 34/38.4 Lbs
Size (H x W x D) inch| 14.8×14.8×13.1| 14.8×14.8×16.2| 19×19.7×17.7|
19×19.7×19.1| 19×19.7×17.7| 19×19.7×19.1
Maintenance Instructions
- To keep the unit clean, use a damp cloth to wipe the surface of the housing.
- Never clean the Advertising Inflatable Blower with water.
- When not in use, unplug and store the Advertising Inflatable Blower in a dry indoor place.
- Always disconnect the Advertising Inflatable Blower from its power source before performing any maintenance or cleaning.
Troubleshooting
For any problems not listed below, call your local distributor or contact our
Service Department.
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor Not Running | a) Switch is OFF | Turn switch ON |
| b) Faulty switch/cord | Replace switch or cord | |
| Scraping Noise From Inflatable Blower | a) Check for obstruction entering | |
| through the intake or exhaust | Remove obstruction | |
| b) Check for any pressure against blower housing | Remove any pressure | |
| Weak Air Flow | a) Obstructed vents/inlets | Clean out vents/inlets |
XPOWER Limited Warranty (USA)
XPOWER’s Limited Warranty covers the unit (excludes POWER CORD) from defects
in material and craftsmanship. The Warranty covers normal use for a term of
one year from the original date of purchase including parts, labor, and one
way shipping. Non-contiguous states must pay for roundtrip freight. A purchase
receipt must be provided.
Important!
This warranty does not cover or apply to defects due directly or indirectly to
misuse, abuse, disassembly, alteration, corrosive chemicals, improper voltage,
fire, flood, negligence, accident, improperly or incorrectly performed
maintenance or repair, or failure to perform necessary maintenance or repair,
or if the use of this product is not in compliance with the instructions and
specifications for its use
Service
For Warranty service and parts replacement (US users only), you must:
A. Call 1-855-855-8868 for a RMA
(Return-Merchandise-Authorization) number.
B. Have original proof of purchase.
C. Use the original undamaged packaging or an industrial certified packaging
method.
End user will be responsible for shipping the unit (with RMA Number showing on
the shipping label) to the XPOWER Service Department. XPOWER will inspect,
assess and advise the repairs needed and the applicable cost, if any.
For users outside the US, please contact an XPOWER Distributor in your country
or region for Warranty service and parts replacement.
Parts List
| Item No. | Parts Name |
|---|---|
| 1 | Upper cover |
| 2 | LED light (“L” model) |
| 3 | Fan |
| 4 | Housing |
| 5 | Power cord |
| 6 | Switch plate |
| 7 | LED switch (“L” model) |
| 8 | Speed switch |
| 9 | Velcro strap (male) |
| 10 | Motor |
| 11 | Capacitor |
| 12 | Base |
| 13 | Wheels |
| 14 | Support Rod (SDSK) |
** Actual parts are not limited on
this list, contact XPOWER for ordering parts.
Warranty Registration
For your product warranty, please complete and mail / fax this form to XPOWER
MANUFACTURE, INC.
Address: 668 S. 6th Ave., City of Industry, CA 91746, USA Tel:
626-285-3301 Fax:
626-285-3302 (for US user only)
(For your convenience, register your product online at
xpower.com)
Accessories
SDSK (Support Rod for Vertical Advertisement Blower)
A Support Rod (SDSK) is included with unit to stabilize the vertical
advertising inflatable. The support rod use is optional. However, it is
strongly recommended to use the SDSK for large and tall advertising
inflatable. The support rod improves vertical stability and prevents complete
inflatable collapse.
Assembling:
Connect 3 pieces of 1.6’ short rods one by one with bushings to complete
assembly of SDSK rod. Insert rod bottom (non-cap) into provided hole on the
upper cover and position sleeve over rod before securing the advertising
sleeve.
To:
XPOWER Manufacture, Inc.
668 S. 6th Ave.,
City of Industry, CA 91746, USA
Tel: 626-285-3301, Fax:
626-285-3302
XPOWER MANUFACTURE, INC.
668 S. 6th Ave.,
City of Industry, CA 91746, USA
Tel: 626-285-3301, Fax:
626-285-3302
www.xpower.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>