XPOWER P-800I Inflatable Blowers Owner’s Manual
- June 6, 2024
- XPOWER
Table of Contents
XPOWER P-800I Inflatable Blowers Owner’s
introduction
XPOWER Inflatable Blowers are ETL/CETL Certified Professional Level Multifunctional Inflatable Blowers with the most efficient engineering design.
Features:
- Low power draw with a high velocity air flow from 3,200 to 3,600 CFM
- Quiet motor and lightweight.
- Easy carrying handle and stackable up to 3 units high.
- Easy and quick to disassemble for thorough cleaning and service.
- Power cord lengths are 20’.
- Easy cord wrap on handle.
- Luggage handle and wheels for “H” series models.
- Inflatable adapter for “I” series model
- Durable and rugged housing.
- Weatherproof Indoor/Outdoor use with P-815I model.
- 3 airflow positions for “H” series models (0°, 20° Kickstand, 90°).
- 4 airflow positions for other models (0°, 20°, 45°, 90°).
operation / instruction
XPOWER Inflatable Blowers are intended to move air and to dry floors, walls, furniture, etc. Durable and easy to operate with an effective balance of static pressure and airflow, the units are suitable for a variety of applications.
- Prior to plugging the unit into the power source, inspect completely for any shipping damage.
- Adapter Assembly (Fig. A)
- Plug the electrical cord into the power outlet.
- Carefully place the Inflatable Blower unit on a stable, flat dry surface.
- The unit is capable of being used at 4 different angles to direct air flow; unit with handle can be used at 3 different angles.
- Turn the switch to select desired speed, while making sure unit operates normally.
- All Inflatable Blowers in operation must be supervised at all times.
safety instruction
- To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water.
- To avoid risk of injury, do not direct airflow at face or any part of the body.
- To reduce the risk of fire or electric shock, do not use the Inflatable Blower with any solid-state speed control device.
- Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and/or install a GFCI receptacle if necessary.
- Do not operate any Inflatable Blower with a damaged cord or plug. Discard the unit or return it to an authorized service facility for examination and/or repair.
- Unplug the Inflatable Blower from the power supply before moving, servicing or cleaning.
- Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or similar coverings. Place the power cord away from traffic area to prevent tripping.
- Do not allow children to play with or around an Inflatable Blower at any time.
- Do not move or carry an Inflatable Blower while unit is operating.
- All Inflatable Blowers in operation must be supervised at all times.
maintenance instruction
- To keep the Inflatable Blower clean, use damp cloths to wipe the surface of the housing; do not immerse in liquid
- When not in use, unplug and store the Inflatable Blower in a dry indoor place out of reach of children.
- Always disconnect the Inflatable Blower from its source before performing any maintenance or cleaning.
troubleshooting
| | |
---|---|---|---
Inflatable Blower not running
| No power input| Plug in the Inflatable Blower; check circuit breaker
Switch not turned on| Turn on switch
Inflatable Blower fan wheel jammed| Remove material jamming fan wheel
Intake or exhaust blocked
| Turn unit off and allow to cool, then remove blockage
Inflatable Blower vibrates| Accumulation of dirt on fan blades| Clean
Inflatable Blower fan blades
specifications
Model | P-800I | P-800HI | P-830I | P-830HI | P-815I |
---|---|---|---|---|---|
Volt/Frequency | 115V,60Hz | 115V,60Hz | 115V,60Hz | 115V,60Hz | 115V,60Hz |
Power | 3/4 HP | 3/4 HP | 1 HP | 1 HP | 1 HP |
Amps | 7.5 | 7.5 | 8.5 | 8.5 | 8 |
Unit Weights | 24.2 Lbs. | 27.2 Lbs. | 25.2 Lbs. | 28.2 Lbs. | 26.1 Lbs. |
Speeds | Three | Three | Three | Three | One |
Size (WxDxH) (Inch) | 17.5″ x 21″ x 18.5″ | 17.5″ x 21″ x 18.5″ | 17.5″ x | ||
21″ x 18.5″ | 17.5″ x 21″ x 18.5″ | 17.5″ x 21″ x 18.5″ | |||
Handle/Wheels Optional | Optional | Optional | Optional | ||
Filter Optional | Optional | Optional | Optional | Optional | Optional |
Cord Length | 20 Ft. | 20 Ft. | 20 Ft. | 20 Ft. | 20 Ft. |
Overheating Protecting | Thermally |
Protecting
| Thermally
Protecting
| Thermally
Protecting
| Thermally
Protecting
| Thermally
Protecting
Rated Airflow (on high)| 3200| 3200| 3600| 3600| 3600
Housing| PP| PP| PP| PP| PP
Certification| ETL/CETL| ETL/CETL| ETL/CETL| ETL/CETL|
XPower limited warranty
XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor and one way shipping. The XPOWER inflatable blower Housing and handle are covered for a term of five years from the date of original purchase. This Warranty does not cover signs of misuse including, but not limited to, a unit that has been dropped, subjected to water damage, tampering, improper voltage use or unauthorized maintenance and repairs. The power cordd is not covered by the warranty.
service
- Call Service Department for a Return Merchandise Authorization (RMA) number and to obtain return shipping instructions.
- Provide original proof of purchase.
- Use original non-damaged packaging or industrial certified packaging materials.
The end user will be responsible for shipping the unit (with the RMA number displayed on the shipping label) to the XPOWER Service Department. Upon inspection, XPOWER will advise you of the repairs needed and the cost (if applicable). XPOWER will provide repair or replacement parts depending on the warranty
800 Series Parts List
| |
|
---|---|---|---
800-1|
| 800-2|
800-3| Timer & Switch Plate| 800-4-1/2| Switch Knob & Timer Knob
800-5| | 800-6|
800-7| | 800-8|
800-9| | 800-10| ****
800-11| | 800-12|
800-13| | 800-14|
800-15| Capacitor| 800-16| Filters
accessories
Luggage Handle & Wheels
XPOWER Inflatable Blower Models P-800HI and P-830HI come with built-in
extendable luggage handle and wheels for easy transportation and mobility.
Filters (Optional)
A set of Filters is available for the Air Mover models which will help prevent
small debris and dust from entering the unit. To clean the filters: Remove the
filters from the unit and wash with warm soapy water, rinse with clean water
and let dry thoroughly before reinstalling.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>