HUDSON VALLEY L1911 Bergman Lamp Lighting Instruction Manual
- June 17, 2024
- HUDSON VALLEY
Table of Contents
HUDSON VALLEY
LIGHTING GROUP
Hudson Valley Lighting
L1911 Bergman Lamp Lighting
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION ANDMAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM.WASH HANDS AFTER USE.
- UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANYDAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
| PART(S) | REPLACEMENT PART NAME | NUMBER |
|---|---|---|
| A | FINIAL | FIN-L1911 |
| B | DIFFUSER | DIF-L1911 |
| C | SHADE | SHD-L1911 |
| E | HARP | HRP-9.5 |
FIXTURE INSTALLATION
- Insert the HARP (E) by squeezing the sides and placing on the SADDLE (F) of the FIXTURE ASSEMBLY(G)
- Install the BULB (D) into the socket.THIS FIXTURE IS RATED FOR 60 WATT TYPE A LAMP. DO NOTEXCEED THE RECOMMENDED WATTAGE
- Carefully remove the protective covering the SHADE (C) and DIFFUSER (B), place the SHADE (C) andDIFFUSER (B) over the HARP (E) and secure with the FINIAL (A).
- Plug the CORD (H) into the wall outlet. Use the switch on the socket to turn the fixture on/off.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>