HUDSON VALLEY PTL1222 Finn 30 Inch Tall Accent Table Lamp Installation Guide
- May 15, 2024
- HUDSON VALLEY
Table of Contents
HUDSON VALLEY PTL1222 Finn 30 Inch Tall Accent Table Lamp
Specifications:
- Brand: Troy Lighting
- Model: SOLOMA PTL1222
- Rated Wattage: 1 Watt
- Lamp Type: A1
- Website: www.hvlgroup.com
Product Usage Instructions
Fixture Installation:
- Screw the BULB (C) into the SOCKET of the FIXTURE ASSEMBLY (G). Ensure not to exceed the recommended 1 Watt for the A1 lamp type.
- Place the ROUND TUBE SLEEVE (E), FLAT WASHER (B), and the SHADE (A) on top of the exposed nipple of the FIXTURE ASSEMBLY (G) then secure using the FINIAL (D).
- Plug the CORD (F) into the wall outlet. Use the switch on the cord to turn the fixture on and off.
Parts Information:
| PART(S) | REPLACEMENT PART NAME |
|---|---|
| A | SHADE |
| B | FLAT WASHER |
| D | FINIAL |
| E | ROUND TUBE SLEEVE |
Frequently Asked Questions (FAQ):
Q: What is the recommended wattage for the fixture?
A: The fixture is rated for a maximum of 1 watts using a type A1 lamp. Do not
exceed this wattage to avoid damage.
Q: Where can I find replacement parts for the SOLOMA PTL1222 fixture?
A: You can find replacement parts with the following part numbers on the
manufacturer’s website at www.hvlgroup.com:
- SHADE – SHD-PTL1222
- FLAT WASHER – WAS-PTL1222
- FINIAL – FIN-PTL1222
- ROUND TUBE SLEEVE – TUB-PTL1222
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURES MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY-TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
- UNPACK FIXTURE, PARTS, AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
FIXTURE INSTALLATION
- Screw the BULB (C) into the SOCKET of the FIXTURE ASSEMBLY (G). THIS FIXTURE IS RATED FOR 1? WATT TYPE A1? LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE?
- Place the ROUND TUBE SLEEVE (E), FLAT WASHER (B), and the SHADE (A) on top of the exposed nipple of the FIXTURE ASSEMBLY (G) then secure using the FINIAL (D).
- Plug the CORD (F) into the wall outlet. Use the switch on the cord to turn the fixture on and off.
REPLACEMENT PART NAME
| PART(S) | REPLACEMENT PART NAME | NUMBER |
|---|---|---|
| A | SHADE | SHD-PTL1222 |
| B | FLAT WASHER | WAS-PTL1222 |
| D | FINIAL | FIN-PTL1222 |
| E | ROUND TUBE SLEEVE | TUB-PTL1222 |
www.hvlgroup.com
SOLOMA PTL1222
Installation Instructions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>