Yale YSB-200-EB1 High Security Compact Safe User Manual

Yale YSB-200-EB1 High-Security Compact Safe

Product Information

Specifications

• Brand: Yale

• Models: YSB/200/EB1, YSB/250/EB1, YSB/400/EB1, YLB/200/EB1,
  YSM/250/EG1, YSM/400/EG1, YSM/520/EG1, YLM/200/EG1

• Battery Type: Not specified

• Weight: Heavy

• Installation: Professional locksmith recommended

Safe Overview
The Yale Safe is a secure storage solution designed to protect your valuable belongings. It features a display, keypad, concealed override keyhole, LED interior lights (on some models), battery compartment, and locking bolts.

Installing the Batteries

1. Open the safe using the manual override key.
2. Remove the battery cover located on the rear of the door.
3. Place the batteries according to the illustration at the back of the battery compartment. Ensure correct polarity.
4. Close the battery compartment.

When the batteries need changing, the display will show a warning message and emit a sound. Please note that when new batteries are installed, the sound and display settings are reset to default.

Securing the Safe
To reduce the risk of theft, it is essential to securely fix the safe. Use the included bolts and secure it to a solid concrete floor. For maximum performance and correct installation, we recommend hiring a professional locksmith.

Caution : This product is heavy. Incorrect installation may result in injury.

Set / Re-set Your User Code

1. Unlock the door using the manual override key if necessary.
2. Press and hold the “+” button and simultaneously press the “code” button. The display will show a programming mode.
3. Enter a code of your choice (between 3-8 digits) and press the”code” button. You will be prompted to repeat the code.
4. Re-enter your code and press the “code” button.
5. A sound and the display will confirm that you have programmed a new code. If you hear a sound and the display reads an error message, repeat steps 2 and 3.
6. If you forget your code, use the manual override key to open the safe and reset the code.

Please note that your user code does not need to be reprogrammed when changing the batteries.

Opening the Safe

1. Press the “code” button.
2. Enter your user code.
3. If the code is correct, you will hear a confirmation sound, and the door will open.

Closing the Safe

1. Close the safe door.
2. Press the “close” button followed by the “code” button.
3. The bolts will engage, locking the door, and the display will show a locked status.

Please note that if an incorrect user code is entered, you will hear a beep, the display will show an error message, and the door will not open. If the wrong user code is entered four consecutive times, an alarm will sound for approximately one minute, during which you will not be able to open the safe with the electronic lock.

Using the Manual Override Key

1. To open the safe, place the key in the keyhole behind the Yale logo. The key can only be inserted one way, with the Yale logo on the key head facing down.
2. Turn the key clockwise twice to fully retract the locking bolts.

Re-activating the Interior Light
(Only available on some models)

1. Press the “show/hide digits” button.

Turning Sound On/Off while Entering Code
Press the “+” button twice to turn the sound on/off.

FAQ

Q: What should I do if I forget my user code?
A: Use the manual override key to open the safe and reset the code.

Q: Do I need to reprogram my user code when changing batteries?
A: No, your user code does not need to be reprogrammed when changing batteries.

For models:

• YSB/200/EB1
• YSB/250/EB1
• YSB/400/EB1
• YLB/200/EB1
• YSM/250/EG1
• YSM/400/EG1
• YSM/520/EG1
• YLM/200/EG1

Please keep the manual safe for future reference.

Safe overview

1. Display
2. Keypad
3. Concealed override keyhole
4. LED interior lights (on some models)
5. Battery compartment
6. Locking bolts

Installing the batteries

1. Open the safe using the manual override key.
2. Remove the battery cover located on the rear of the door.
3. Place the batteries according to the illustration at the back of the battery compartment. Once the batteries are installed, close the battery compartment.

Before using your Yale safe you must insert batteries. The safe requires 4 “AA” (1.5V R06) – which are included.

When batteries need changing the display will show together with a warning sound when you press .

Please note, when new batteries are installed the sound and display function are reset to default settings, (code visible and sound on). Your user code is not reset when you change batteries.

Securing the safe

To reduce the risk of theft it is essential that your safe is securely fixed. Please use the included bolts and secure to a solid concrete floor. For maximum performance and correct installation, a professional locksmith must install the safe.
This product is heavy. Incorrect installation may result in injury.

Set/re-set your user code

Set /re-set your user code

1. The code may only be programmed when the safe is unlocked: if necessary use the override key to open the safe.
2. Press and hold and simultaneously press 3. The display will
3. Enter the code of your choice (between 3-8 digits) then press . You will now be asked to repeat the code you just entered (the display shows ). Reenter your code and press
4. A sound and the display will confirm that you have programmed a new code. If you hear a sound and the display reads , repeat step 2 and 3.

If you have forgotten your code, use the manual override key to open the safe and re-set the code. Please note, your user code does not have to be reprogrammed when you change the batteries.

Opening the safe

1. Press , the display shows 
2. Enter your user code and press
3. If the code is correct, you will hear a confirmation sound, the display will show OPEN and the door will open.

Closing the safe

1. close door
2. Press followed by The bolts engage, locking the door, and the display shows .

Please note, if the incorrect user code is entered you will hear a beep, the display will show  and the door will not open. If the wrong user code is entered 4 consecutive times an alarm will sound for approximately 1 minute, during which you will not be able to open the safe with the electronic lock.

Using the manual override key

1. To open the safe place the key in the key hole behind the Yale logo. The key can only be inserted one way, Yale logo on key head facing down. Turn the key clockwise twice to fully retract the locking bolts.

Please do not store the mechanical override keys inside the safe. Please note, for security reasons the key can not be removed and the electronic lock is deactivated when the safe is opened using the mechanical override key. To remove the key, you must lock the safe using the key.

Re-activating the interior light

(Only available on some models)

To re-activate the light press . The display shows and the light will be turned on for another 30 seconds

The light is automatically activated when the safe door is opened with the electronic keypad. The light can be re- activated at any time.

Show/hide digits while entering the code

Press and hold and simultaneously press 1 to change the setting.

• the display shows no input digits will be visible in the display when a code is entered.
• If display shows the code will be visible in the display when a code is entered.

Turning sound on/off

Press and hold and simultaneously press the to change the setting.

• If display shows this means that audio feedback when operating the safe is turned off.
• If display shows this means that audio feedback when operating the safe is turned on.

The safe is delivered with the following items supplied separately inside the box:

For any inquiries visit www.yalelock.com

References

• Smart Locks, Digital Locks, Digital Safes, Padlocks, Home Automation | Yale
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>