AVer M15W Mechanical Arm Wireless Visualizer Instruction Manual
- June 17, 2024
- AVer
Table of Contents
- M15W Mechanical Arm Wireless Visualizer
- Product Information
- Specifications
- Product Usage Instructions
- Hardware Parts
- Control Panel
- Device Connection
- Q: Where can I find FAQs, technical support, software, and
- Q: How do I reset the camera to factory default settings?
- Q: How do I connect the camera to a Wi-Fi network?
- Q: Can I charge the camera using the USB connection to a laptop
- Q: Can I use the camera while it is charging?
M15W Mechanical Arm Wireless Visualizer
Product Information
Specifications
- Model: M15W
- Package Contents:
- M15W unit
- Power adapter/Power plug
- USB cable
- Instruction manual
- Wi-Fi Dongle
- Optional Accessories:
- Carrying Bag
- Anti-glare Sheet
- Control Panel:
- Power indicator
- Wi-Fi indicator
- Battery indicator
- Power button (on/off/standby)
- Freeze button
- Lamp (on/off)
- Auto focus button
- Zoom in button
- Zoom out button
- Built-in MIC button
- Device Connection:
- Connect M15W to laptop and HDMI display.
- P2P connection via Wi-Fi Dongle.
Product Usage Instructions
Hardware Parts
The following hardware parts are included:
- Power LED Indicator
- Wi-Fi LED Indicator
Control Panel
The control panel consists of the following buttons:
- Power button: Press to turn the camera on/off/standby.
- Freeze button: Press to freeze the image.
- Lamp button: Press to turn the lamp on/off.
- Auto focus button: Press to enable auto focus.
- Zoom in button: Press to zoom in.
- Zoom out button: Press to zoom out.
- Built-in MIC button: Press to enable the built-in
microphone.
Device Connection
To connect the M15W camera to a laptop and HDMI display:
- Connect M15W to the laptop and HDMI display using the provided
USB cable and HDMI cable.
To establish a P2P connection via Wi-Fi Dongle:
-
Plug in the Wi-Fi dongle to the PC/laptop and install the
AVerTouch application. -
Open the AVerTouch application and click “Connect” to connect
the camera.
FAQ
Q: Where can I find FAQs, technical support, software, and
instruction manual download?
A: You can find FAQs, technical support, software, and
instruction manual download at https://www.averusa.com/education/support/.
Q: How do I reset the camera to factory default settings?
A: Press the compound key to switch between different modes,
including auto-detecting the best resolution, adjusting the
gradient of the image, and increasing the frame rate.
Q: How do I connect the camera to a Wi-Fi network?
A: Power on the camera and select the Wi-Fi connection option.
Open the AVerTouch application on your laptop and follow the
on-screen instructions to enable the Wi-Fi function on the camera.
Select the camera from the list of available devices to establish a
Wi-Fi connection.
Q: Can I charge the camera using the USB connection to a laptop
or other devices?
A: Yes, you can charge the camera using the USB connection
between other devices. However, please note that the power supply
needs to be 5V2A, and the charging time will be longer. It is
recommended to fully charge the camera for the first time use.
Q: Can I use the camera while it is charging?
A: No, the laptop, projector, or monitor cannot provide enough
power through the USB connection to operate the camera while it is
charging. When charging with the wall outlet, the battery indicator
will flash green.
M15W Instruction Manual
PACKAGE CONTENTS
The items below are included with this product. If any item is missing,
contact the dealer from whom you purchased this product.
HARDWARE PARTS
3
LED INDIC
1
Power
2
Wi-Fi
M15W unit
Power adapter/ Power plug
USB cable
Instruction manual
Wi-Fi Dongle
OPTIONAL ACCESSORIES
Carrying Bag Anti-glare Sheet
MORE HELP
For FAQs, technical support, software and instruction manual download, please
visit:
https://www.averusa.com/education/support/
P/N: 300APW00-???
4
567 8 1. Camera head 3. Arm 5. Wi-Fi dongle 7. HDMI output
CONTROL PANEL
2. LED lighting 4. Control panel 6. USB port 8. DC power jack
4
6
8
1 2
10
3
5
7
9
1. Power indicator 2. Wi-Fi indicator 3. Battery indicator 4. Power button
(on/off/standby) 5. Freeze
6. Lamp(on/off) 7. Auto focus 8. Zoom in 9. Zoom out 10. Built-in MIC
Battery
[Note] 1. The ba
replace 2. To com
button.
COMPOU
Snap scree or clo
COMPOUND KEY (Cont.)
Back to factory default settings. Press to switch between following modes: –
Auto detects the best resolution(4K, 720P, 1080P) – 1024×768 (If HDMI device
support) – 4K 60Hz (If HDMI device support)
Press to switch between following modes: – Normal: Adjust the gradient of
image. – Motion: Increase frame rate.
Su fficient lighting is required when using this mode. – High quality: Better
image quality.
DEVICE CONNECTION
1 Connect M15W to laptop and HDMI display.
P2P connection via Wi-Fi Dongle
1 Plug-in the WiFi dongle to PC/laptop and Install the
AVerTouch application.
AVerTouch
Wi-Fi Dongle
Laptop
2
Open AVerTouch application, click
to
connect the camera.
4 Ent
to c
5 Clic
[Note] The Wi-Fi mode is on when the camera is powered up. When camera
connects to a laptop through the USB port,
the Wi-Fi mode is disabled. Please follow the direction on HDMI device.
2 Plug in power adapter and turn on M15W. [Note] Check serial number at bottom
of the camera to find your camera.
3 Click Next to continue. [No
6 Sel [Note]
Please fully charge the camera for the first time use.
When the camera is power on, the camera is in “Standby”
mode. In standby mode, it can be charging with the USB
connection between other devices; but the power supply is
required 5V2A and the charging time will be longer.
[No
The laptop, projector, or monitor cannot provide the power
the
through the USB connection to the camera while the camera
is operating.
When the camera is charging with the wall outlet, the battery
indicator is in green flashing.
Press
when the camera doesn’t work
properly. The camera back to standby mode.
Wi-Fi Connection
1 Power on the camera.
3 Select
to make a connection with camera.
MIRACAS
1 Pres
Check the Wi-Fi status Blue light on.
2 Open AVerTouch and follow on-screen instruction to
enable Wi-Fi function on camera.
4 Select
to switch to camera live screen.
[Note] The software will auto detect the camera on your
network. Select the camera that you want to connect with it. The camera name
will be “AVer `model name’ – WiFi
dongle Mac address”. The Mac address will be different
from the device.
[Not
2 Sele
mod
3 Sele
[Note The Pre The
scr
USING THE CAMERA Storage the Camera
Using Angle of the Camera
180° 180°
135°
Mounting the Camera on a Flat Surface
75mm
330mm
Rotate the Camera Head Move the camera head as the figure shown. [CAUTIION] To
avoid damage to the camera head, hold the edge of the camera head to rotate
the camera head.
90° 90°
USING THE CAMERA(Cont.)
Shooting Area When camera position is 330mm high, the shooting area will be A3
size. Place the object as illustrated show, the object image is in a positive
direction.
Object direction
Image Shooting Direction To shoot people, adjust the camera lens as
illustrated shown; the person’s image is in a positive direction.
SPECIFIC
Sensor Pixel Cou Frame Ra Image mo Effect HDMI Out Focusing Shooting Zooming
Dual Mod WiFi Stre Dual Ban Miracast Compatib
Wireless
Power So Consump USB Bus Lamp Typ USB DC 5V Inp MIC Operating
Folded Weight
Software
Federal Communications Commission Statement
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to pro-vide reasonable protection against harmful interference when
the equipment is operate din a commercial environment. This equipment
generates, uses, and can radiate radiofrequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense. FCC
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE Class A
Warning: This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
NOTICE
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. THE INFORMATION
CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY.
COPYRIGHT
©2019 AVer Information Inc. All rights reserved.
TRADEMARKS
“AVer” is a trademark owned by AVer Information Inc. Other trademarks used
herein for description purpose only belong to each of their companies.
CAUTION
Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used
Batteries According to the Instructions.
WARNING To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture. Warranty will be void if any unauthorized
modifications are done to the product. Do not drop the camera or subject it to
physical shock. Use the correct power supply voltage to avoid the damaging
camera. Do not place the camera where the cord can be stepped on as this may
result in fraying or damage to the lead or the plug. Hold the bottom of the
camera with both hands to move the camera. Do not grab the lens or Flexible
arm to move the camera.
Do not pull the mechanical arm and camera part in the opposite direction.
RADIO FREQUENCY FOR PORTABLE DEVICE USAGE (<20m from body/SAR needed eg. BT
dongle, smartphone) Radiation Exposure Statement: The product comply with the
FCC portable RF exposure limit set forth for an uncontrolled environment and
are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as
possible from the user body or set the device to lower output power if such
function is available. FOR MOBILE DEVICE USAGE (>20cm/low power eg. AP
routers) Radiation Exposure Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
RADIO F
Europe This devi Radio Eq methods conformit Equipmen
DISCLAIM
No warra made with quality, p purpose. carefully assumed documen
In no eve
incidenta
inability to
the possi
TH IN D W W D R E IN W C S T
CONTACT
AVer Inform www.averus 668 Mission Fremont, CA Toll-free: 1(8 Local: 1(408
Support.usa
References
- AVer USA
- Manual-Hub.com – Free PDF manuals!
- Support: Videos, FAQ, Troubleshooting, and Download | AVer USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>