Inrico IRC380 Smart Multi Mode Radio User Guide

Inrico IRC380 Smart Multi Mode Radio

Product Information

• Specifications:
  • Product Name: Two-Way Radio Device
  • Model Number: TRD-100
  • Color: Black
  • Power Source: Rechargeable Battery
  • Frequency Range: 400-470MHz
  • Dimensions: 5.5 x 2.5 x 1 inches
  • Weight: 0.4 lbs
• Product Overview:
  • The Two-Way Radio Device features various buttons and knobs for different functions including PoC talk, DMR communication, recording playback, and SOS activation. It supports customization and has a dual transmitting mode.
• Clean and Maintenance:
  • Before cleaning, make sure the device is turned off and disconnected from other equipment.
  • Cover the accessories connector when the radio is not in use.
  • Use a soft brush and neutral detergent to clean dust – avoid strong corrosive chemicals.
  • Keep the equipment and accessories dry and do not use heating devices like microwaves or hair dryers to dry them.

Product Usage Instructions

• Power On/Off and Mode Switching:
  • To power on the device, press the On/Off button. To switch between PoC and DMR modes, use the F2 button for a short press.
• Recording Playback:
  • To enter recording playback mode, press the F3 button. Use a short press on F2 to move to the next record or select a recording to play automatically.
• SOS Activation:
  • In case of emergency, long-press the SOS button to initiate PoC and DMR SOS calls.
• Volume Control:
  • Adjust the volume by rotating Knob2 clockwise for volume up and counterclockwise for volume down.
• Accessories Installation:
  • Insert SIM Card: Insert a compatible SIM card into the designated slot.
  • Attaching the Battery: Align the electrical contacts of the battery with the rails and firmly press it to ensure a secure connection.

FAQs

• Q: Can heating devices be used to dry the equipment?
  • A: No, please avoid using microwave ovens or hair dryers to dry the device or accessories as it may cause damage.

Clean and Maintenance

• Before cleaning and maintaining the device: please stop running, turn off the device, and disconnect all connections with other equipment.
• When you do not use the radio, please cover the accessories connector.
• When cleaning the dust, please use a soft brush and neutral detergent (no strong corrosive chemicals) to wipe it.
• Please keep the equipment and accessories dry.
• Please do not use the microwave oven hair dryer or other heating devices to dry them.

Product Overview

Accessories Installation

1. Insert SIM Card
2. Attaching the Battery
   • (a) Align the electrical contact of the battery with the rails.
   • (b) Press the battery firmly, and make sure the electrical connection touches the bottom.
3. Attaching Headset
   • Open the cover from the top of the device to show the headset sockets. The headset will work immediately after being plugged in.
4. Install Hand Strip

Basic Functions

1. Power on/off
   • Power On: Long press the power button for 3 seconds and the program will start.
   • Power Off: Long press the power button for 3 seconds.
2. User Log-in
   • After the user log in successfully, user information will be broadcast.
3. Initiate a Call
   • Press the PTT button and start to talk.
   • The LED light is solid red during transmission.
   • The LED light is solid green during receiving.
   • If the current network is not online, the green light flashes quickly.
   • If occupied when another person is talking, the PTT button is invalid.
   • Once the call time exceeds 60 seconds automatically end the call.
4. Program
   • Use the programming tool, you need to enter the system settings, “Program” to start.

Status Indicators

Login failed /

no network status

| Red| Flash 1S/time
The battery is low| Red| Flash 3S/time
Low Battery and No Network| Low battery priority is higher

References

• Inrico Two Way Radio Communication|Inrico

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>