IDea BASSO24t F400 Dual 12 Band Pass Passive Subwoofer User Guide
- June 1, 2024
- iDea
Table of Contents
IDea BASSO24t F400 Dual 12 Band Pass Passive Subwoofer
Specifications:
-
Enclosure design: Band-pass
-
Transducers: Dual 12-inch
-
Power Handling (RMS): 1.4 kW
-
Nominal Impedance: 4 Ohm
-
SPL (Continuous/Peak): 129/135 dB
-
Frequency Range (-10 dB): Not specified
-
Frequency Range (-3 dB): Not specified
-
Dimensions (WxHxD): 600 mm x 416 mm x 750 mm
-
Weight: Not specified
-
Connectors: NL-4 PINOUT Subwoofer Signal, Parallel Signal
-
Cabinet Construction: 15 mm Plywood
-
Grille: 1.5 mm perforated weatherised steel with protective
foam -
Finish: Durable IDEA proprietary Aquaforce paint coating
process -
Handles: 4 integrated handles
-
Feet/Skates: 4 rubber feet
-
Installation Accessories: 36 mm Pole mount socket, Rigging
frame (RF-EVO55), Stack frame (RF-EVO55-STK), RS-BASSO-M Rigging
structure (optional), 35 mm Pole (P-21336)
Product Usage Instructions
Installation:
This product must be installed and/or operated by qualified professionals
following safe practices and local regulations.
Setup:
Ensure the subwoofer is placed securely on a stable surface. Connect the
subwoofer using the NL-4 PINOUT Subwoofer Signal or Parallel Signal
connectors.
Operation:
Power on the subwoofer and adjust the settings as needed to achieve the
desired sound output. Refer to the owner’s manual for detailed instructions on
adjusting settings.
Maintenance:
Regularly check and clean the subwoofer to ensure optimal performance.
Avoid exposing the subwoofer to extreme conditions that may damage the
components.
FAQ:
-
Q: Can the BASSO24t F400 be used in outdoor settings?
A: The BASSO24t F400 features a durable construction suitable for outdoor use, but it is recommended to protect it from direct exposure to harsh weather conditions. -
Q: What is the recommended amplifier power for the BASSO24t F400?
A: The subwoofer has a Power Handling (RMS) of 1.4 kW at 4 Ohm impedance, so it is recommended to use an amplifier that can deliver sufficient power within this range for optimal performance. -
Q: Are there optional accessories available for rigging the BASSO24t F400?
A: Yes, the subwoofer features a 4-point optional rigging system compatible with flown and stacked configurations of EVO55, along with other rigging accessories for versatile installation options.
Dual 12” Band-pass Passive Subwoofer Subwoofer Paso banda Pasivo de 2×12”
Overview
Many key factors are to be considered when configuring the subwoofer section
of a loudspeaker system to perfectly match each application: size/weight,
logistic and operational setups, SPL needs, LF extension, cost limitations, as
well as sound engineer preferences (depending on different the type and size
of the event) or audio program characteristics and regional style taste for
subwoofer mixes.
BASSO24t F400 is a dual 12” band-pass subwoofer with a very sha-llow-form
factor and excellent power density that make this loudspeaker a versatile tool
for any small, unobtrusive installed sound reinforcement and portable FOH
applications to more powerful, medium-sized configurations for Touring and
Rental companies and theatre and club installations.
BASSO24t F400 features a 4-point optional rigging system compatible with flown
and stacked configurations of EVO55.
Features
- High output 5th order Band-Pass design
- Dual-12” Premium European High Efficiency Custom IDEA Transducers
- 4 Ohm Passive
- Dual Neutrik NL4 connectors
- Rugged and durable 15 mm birch plywood construction and finish
- Durable Aquaforce paint, available in standard textured black or white
- Optional RAL colours (on demand)
- 36 mm pole cup and four integrated handles
- Optional rigging system for flown/stacked configurations with EVO55 Systems
Applications
- High SPL A/V, portable professional sound reinforcementç
- Main or distributed subwoofer system in Pubs, Lounges, Bars and clubs
- Broadcast Studios and Screening rooms
Technical data
- Enclosure design Band Pass
- Transducers 2×12’’
- Power Handling (RMS) 1.4 kW
- Nominal Impedance 4 Ohm
- SPL (Continuous/Peak) 129/135 dB SPL
- Frequency Range (-10 dB) 44 -83/100/118/160 Hz
- Frequency Range (-3 dB) 52 – 103/125/143/174 Hz
- Dimensions (WxHxD) 416×600×750 mm
- Weight 48.4 kg
- Connectors +/-1 +/-2 2×Neutrik speakOn NL-4 in parallel Input Parallel signal
- Cabinet Construction 15 mm Plywood
- Grille 1.5 mm perforated weatherised steel with protective foam
- Finish Durable IDEA proprietary Aquaforce paint coating process
- Handles4 integrated handles
- Feet/Skates 4 rubber feet
- Installation 36 mm Pole mount socket
- Accessories Rigging frame (RF-EVO55) Stack frame (RF-EVO55-STK) RS-BASSO-M Rigging structure (optional) 35 mm Pole (P-21336)
Technical drawings
Warnings on safety guidelines
- Read this document thoroughly, follow all safety warnings and keep it for future reference.
- The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by qualified and authorized personnel.
- No user serviceable parts inside.
- Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer.
- Installations, rigging and suspension operations must be done by qualified personnel.
- Only use accessories specified by IDEA, complying with maximum loads specifications and following local safety regulations.
- Read the specifications and connection instructions before proceeding to connect the system and use only cabling supplied or recommended by IDEA. Connection of the system should be done by qualified personnel.
- Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the system while in use.
- Loudspeaker produce magnetic field even while they are not in use or even when disconnected. Do not place or expose loudspeakers to any device that is sensitive to magnetic fields such as television monitors or data storage magnetic material.
- Disconnect the equipment during lightning storms and when it is not to be used for a long time.
- Do not expose this device to rain or moisture.
- Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit.
- Clean with a wet cloth. Do not use solvent-based cleaners.
- Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
- Refer all servicing to qualified service personnel.
- This symbol on the product indicates that this product should not be treated as household waste. Follow local regulation for recycling of electronic devices.
- IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.
Warranty
- All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical parts and 2 years from date of purchase for electronic devices.
- The guarantee excludes damage from incorrect use of the product.
- Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres.
- Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair.
- Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order to claim guarantee service or replacement.
Declaration of conformity
I MAS D Electroacústica S.L. , Pol. A Trabe 19-20 15350 CEDEIRA (Galicia – Spain), declares that BASSO24t F400 complies with the following EU Directives:
- RoHS (2002/95/CE) Restriction of Hazardous Substances
- LVD (2006/95/CE) Low Voltage Directive
- EMC (2004/108/CE) Electro-Magnetic Compatibility
- WEEE (2002/96/CE) Waste of Electric and Electronic Equipment
- EN 60065: 2002 Audio, video and similar electronic apparatus. Safety requirements.
- EN 55103-1: 1996 Electromagnetic compatibility: Emission
- EN 55103-2: 1996 Electromagnetic compatibility: Immunity
I MÁS D ELECTROACÚSTICA S.L.
Pol. A Trabe 19-20, 15350 – Cedeira, A Coruña (España)
Tel. +34 881 545 135
www.ideaproaudio.com
info@ideaproaudio.com
Specifications and product appearance may be subject to change without notice.
IDEA_BASSO24t F400_QS-BIL_v4.0 | 5 – 2024
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>