HUDSON VALLEY L3968-AGB Hingham Two Light Floor Lamp Instruction Manual
- June 17, 2024
- HUDSON VALLEY
Table of Contents
Hudson Valley Lighting I Troy Lighting
I Mitzi I Corbett Lighting
L3968-AGB Hingham Two Light Floor Lamp
WARNING/CAUTION
-
DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
-
TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
-
CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM.
WASH HANDS AFTER USE. -
UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
-
PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
HINGHAM L3968
Installation Instructions
| PART(S) | REPLACEMENT PART NAME | NUMBER |
|---|---|---|
| I | GLASS | GLS-3917 |
FIXTURE INSTALLATION
- Screw the FIXTURE ASSEMBLY (A) to the TUBE (B) of the fixture.
- Screw the TUBE (B) to the BASE (C) of the fixture.
- Screw the BULB (H) into the SOCKET of the fixture. THIS FIXTURE IS RATED FOR MAX 15 ATT TYPE A LAMP. DO NOT EXCEED THE RECOMMENDED ATTAGE
- Tilt and rotate the GLASS (I) so that the GLASS HOLDER (G) into GLASS (I). drop GLASS FITTER (F) and secure with the RING (E).
- Put GLASS (I) into the RING (J) of the fixture.
- Plug the CORD (D) into the wall outlet. Use the switch on the cord to turn the fixture on and off.