HUDSON VALLEY HL825401-AGB Destiny 66 Inch Floor Lamp Instruction Manual
- June 17, 2024
- HUDSON VALLEY
Table of Contents
HUDSON VALLEY HL825401-AGB Destiny 66 Inch Floor Lamp
PRECAUTION
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURES MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES.
- THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY-TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
- UNPACK FIXTURE, PARTS, AND PARTS BAG(S) BEFORE DISCARDING THE CARTON.
- MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE BEFORE INSTALLATION FOR ANY DAMAGE.
- HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
FIXTURE INSTALLATION
- Screw the FIXTURE ASSEMBLY (G) on the TUBE (H) of the fixture.
- Screw the TUBE (H) on the BASE (1) of the fixture.
- Insert the HARP (D) by squeezing the sides and placing on the SADDLE (E) of the FIXTURE ASSEMBLY (G)
- Screw the BULB (C) up into the SOCKET of the fixture. THIS FIXTURE IS RATED FOR A MAX 25-WATT TYPE A LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
- Place the SHADE (B) over the HARP (D) and secure it with the FINIAL (A).
- Plug the CORD (1) into the wall outlet. Use the PULL CHAIN (F) to turn the fixture on and off.
| PART(S) | REPLACEMENT PART NAME | NUMBER |
|---|---|---|
| A | FINIAL | FIN-H825401 |
| B | SHADE | SHD-H825401 |
| D | HARP | HRP-10.5 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>